Commit Graph

21 Commits

Author SHA1 Message Date
Ivan Grokhotkov
de42d99b1d sdmmc: command layer refactoring 2018-08-30 13:11:54 +08:00
sergiu2014
383464749a eMMC/MMC support for ESP32
Merges https://github.com/espressif/esp-idf/pull/1941
Previous work in https://github.com/espressif/esp-idf/pull/590
2018-08-30 11:36:28 +08:00
Angus Gratton
0c64ef9600 Merge branch 'bugfix/sdio_write_unaligned_len' into 'master'
SDIO: allow read/write operations for lengths not divisible by 4

See merge request idf/esp-idf!2278
2018-05-21 15:26:32 +08:00
Ivan Grokhotkov
cf81db40a2 sdio: allow reads/writes with lengths not divisible by 4
CMD53 in byte mode supports transfers of any number of bytes between 1
and 512. This change removes limitation that the number of bytes must
be divisible by 4. Host quirk, that such transfers must be split into
two commands (one for the aligned part and the other one for
unaligned) is taken into account.
2018-05-15 09:59:20 +08:00
Roland Dobai
ca08397b6b Fix compilation errors when -O3 is used
Closes https://github.com/espressif/esp-idf/issues/718
2018-05-14 12:29:57 +02:00
Ivan Grokhotkov
e19901c898 sdmmc: don’t print sdio_reset warning when CD is idle 2018-04-24 19:08:44 +08:00
Ivan Grokhotkov
c6829fa5b8 sdmmc: improve error handling during SPI mode init
- In SPI mode, the card will respond to the initial SDIO reset (done
using CMD52) with “invalid command” error. Handle this correctly.

- sdmmc_card_init had a hack where GO_IDLE_STATE (CMD0) command was
sent twice. Add explanation why this is done, and don’t expect
correct response from the card on first CMD0.

- improve logs printed at debug level by adding CMD index
2018-04-11 11:11:17 +08:00
Ivan Grokhotkov
ee600784c5 sdmmc: add SDIO support
- Add SDIO support at protocol layer (probing, data transfer, interrupts)
- Add SDIO interrupts support in SDMMC host
- Add test (communicate with ESP32 in SDIO download mode)
2018-04-11 11:07:13 +08:00
Ivan Grokhotkov
84d6793f77 sdmmc: don't set data_expected on SET_BUS_WIDTH command
SET_BUS_WIDTH is not a data transfer command. Extensive search in the
host datasheet and SD card spec did not reveal the origin of this hack
or 'feature'. Further testing showed that removing this does not lead to
regressions.
2018-04-11 11:06:50 +08:00
Ivan Grokhotkov
bbbdec24d9 sdspi: handle error flags for R3/R7 responses
Previously error flags were only handled for R1 responses. This change
moves error handling into a separate function and calls it for R1/R3/R7.
2018-03-30 18:49:42 +08:00
Michael (XIAO Xufeng)
e14e1508cb fix(sdmmc_host): fix the issue when slot and host flag are not compatible. 2018-02-07 12:05:05 +08:00
Ivan Grokhotkov
3cf23ff77d sdmmc: allow command timeouts to be configured
Previously the timeout was set to the same value (1000ms) for all kinds
of commands. In some cases, such as with slow cards, write commands
failed to complete in time.
This change makes command timeouts configurable via sdmmc_host_t
structure, and also makes default timeouts different for ordinary
commands and write commands.

Closes https://github.com/espressif/esp-idf/issues/1093

Ref TW15774.
2017-10-13 08:16:07 +08:00
Ivan Grokhotkov
631f552489 sdmmc: don't use high speed mode with SD over SPI
Disabling due to limitation of SPI driver (max 26MHz for full-duplex
mode over GPIO matrix)
2017-08-25 14:33:19 +08:00
Ivan Grokhotkov
14c96838bf sdmmc: add more comments about card initialization steps 2017-08-16 18:59:04 +08:00
Ivan Grokhotkov
6baf8195ee sdmmc: add support for high speed (HS) mode
By default SD cards are initialized in default speed (DS) mode. Enabling
HS mode requires SWITCH_FUNC command to be sent twice: first time to
query if the card supports switching to HS mode, second time to perform
the switch.

This change implements SWITCH_FUNC command and adds the procedure to
switch to HS mode.
2017-08-16 18:59:04 +08:00
Ivan Grokhotkov
9253d316e7 sdmmc: implement deselecting a card
In some cases the card needs to be returned to standby mode from data
transfer mode. This is done using CMD7 command, which does not receive
any response in this case.
2017-08-16 18:59:04 +08:00
Ivan Grokhotkov
e6258ac6cb sdmmc: don’t flip word order in MMC_RSP_BITS
MMC_RSP_BITS helper function had a hack that it flipped word order in
the response, assuming that response size is 4 words. This hack does not
work for responses which are not 4 words long (such as the SWITCH_FUNC
response, which is 64 words long).

This change removes the hack and the matching word order reversal code
in sdmmc driver.
2017-08-16 18:59:04 +08:00
Ivan Grokhotkov
512898edee sdmmc: fix reads/writes to/from unaligned buffers
SDMMC hardware treats all buffers as aligned, and ignores 2 LSBs of
addresses written into DMA descriptors. Previously SDMMC host driver
assumed that data buffers passed from SDDMC command layer would be
aligned. However alignment checks were never implemented in the command
layer, as were the checks that the buffer coming from the application
would be in DMA capable memory. Most of the time this was indeed true.
However in some cases FATFS library can pass buffers offset by 2 bytes
from word boundary. “DMA capable” restriction may be broken if pSRAM
support is used.

This change adds buffer checks to the SDMMC host driver (alignment and
DMA capability), so that the host layer will error out for incompatible
buffers. In SDMMC command layer, a check is added to read and write
functions. If an incompatible buffer is passed from the application, new
buffer (512 bytes size) is allocated, and the transfer is performed
using {READ,WRITE}_SINGLE_BLOCK commands.
2017-08-01 03:15:11 +08:00
Ivan Grokhotkov
5f8785eaec sdmmc: add support for SPI protocol commands 2017-07-20 13:34:21 +08:00
Angus Gratton
71c70cb15c heap: Refactor heap regions/capabilities out of FreeRTOS
Remove tagged heap API, rename caps_xxx to heap_caps_xxx

Also includes additional heap_caps_xxx inspection functions.
2017-07-10 17:46:03 +08:00
Ivan Grokhotkov
edd924f273 sdmmc: add peripheral driver and protocol layer 2017-01-09 04:51:24 +08:00