Currently when process is started through asyncio Runner and it is termited
e.g. with SIGINT(ctrl+c) a traceback is printed instead of gracefully
exit.
Exception ignored in: <function BaseSubprocessTransport.__del__ at 0x7fe980970900>
Traceback (most recent call last):
File "/usr/lib64/python3.12/asyncio/base_subprocess.py", line 129, in __del__
self.close()
File "/usr/lib64/python3.12/asyncio/base_subprocess.py", line 107, in close
proto.pipe.close()
File "/usr/lib64/python3.12/asyncio/unix_events.py", line 568, in close
self._close(None)
File "/usr/lib64/python3.12/asyncio/unix_events.py", line 592, in _close
self._loop.call_soon(self._call_connection_lost, exc)
File "/usr/lib64/python3.12/asyncio/base_events.py", line 793, in call_soon
self._check_closed()
File "/usr/lib64/python3.12/asyncio/base_events.py", line 540, in _check_closed
raise RuntimeError('Event loop is closed')
RuntimeError: Event loop is closed
This is caused because asyncio Runner context in asyncio.run is closing the event
loop and if exception is unhandled in coroutine(run_command) the transport is not
closed before the even loop is closed and we get RuntimeError: Event loop is closed
in the transport __del__ function because it's trying to use the closed
even loop.
Let's catch asyncio.CancelledError in case the process we are trying to
read from is terminated, print message, let the asyncio finish and exit
gracefully.
Closes https://github.com/espressif/esp-idf/issues/13418
Signed-off-by: Frantisek Hrbata <frantisek.hrbata@espressif.com>
Currently RunTool reads command's output with asyncio read, which
returns bytes. This is decoded into python's string and the output already
contains OS specific line endings, which on Windows is CRLF. Problem is
that the command output is saved by using python's text stream/file,
which replaces LF, native python's line ending, with OS specific line ending.
On Windows, and in this particular case, the CRLF from the command output is
translated into CRCRLF and saved in the commands output file. When this
file is read in again, e.g. for hint modules, the CRCRLF is replaced
with LFLF. Again the file is open as text file. Meaning a new emply line
is added.
Fix this by opening the output file with "newline=''", which prevents
this translation. We already have the OS specific line ending in the
command's output.
Signed-off-by: Frantisek Hrbata <frantisek.hrbata@espressif.com>
Currently hints are supported based on hints.yml only, which may be
limiting for some use cases. This introduces a generic plugin approach,
which allows to implement hint module that doesn't require entry in hints.yml.
Such module has the full command output available and it is not limited to
a single regex in hints.yml.
Note that regex in hint.yml expects the output concatenated into a single line,
but hint modules are getting the output unchanged.
Signed-off-by: Frantisek Hrbata <frantisek.hrbata@espressif.com>
Introduces get_build_context() helper, which allows to get build context, e.g.
project description, at places where this info is not available. The
build context is set within ensure_build_directory.
Signed-off-by: Frantisek Hrbata <frantisek.hrbata@espressif.com>
Currently hints are processed only once the process is finished and
exits with non-error exit code. In interactive mode, e.g. for monitor,
we want to process ouput lines for hints right away.
This adds a simple buffer, which keeps the last line and once EOL is
reached, it is processed for hints.
Since the original hints processing was file based, a new helper
function was added to allow processing hints in string.
Signed-off-by: Frantisek Hrbata <frantisek.hrbata@espressif.com>
Currently the forced progress in RunTool is trying to fit the output
line into a terminal width, but it doesn't take into an account a
situation when the terminal width is reported as zero. This manifests
when running in docker image with redirected output and can be seen
in the github workflow output for esp-idf-ci-action.
docker run --rm -t my_ubuntu_esp python3 -c 'import os,sys; print(os.get_terminal_size(), sys.stdout.isatty())'
os.terminal_size(columns=238, lines=59) True
vs
docker run --rm -t my_ubuntu_esp python3 -c 'import os,sys; print(os.get_terminal_size(), sys.stdout.isatty())' | tee
os.terminal_size(columns=0, lines=0) True
Since the output is reported as tty and the terminal width as 0, the
fit_text_in_terminal() function returns empty string. I also verified this
by running idf.py build inside a testing docker image.
This fix adjusts the fit_text_in_terminal() function to return original
line if the terminal width is zero.
Also simplify the progress print and use same approach as ninja
https://github.com/ninja-build/ninja/blob/master/src/line_printer.cc#L66
Signed-off-by: Frantisek Hrbata <frantisek.hrbata@espressif.com>
Currently if the IDF_TARGET env is set, and old sdkconfig exists with
different target value in CONFIG_IDF_TARGET, the set-target action fails
complaining about the IDF_TARGET env and value in sdkconfig being different.
We should ignore IDF_TARGET value from sdkconfig, because we are
actually setting new target and the old sdkconfig is renamed in cmake.
This can be easily reproduced with
---8<---
$ IDF_TARGET=esp32 idf.py set-target esp32
$ IDF_TARGET=esp32s3 idf.py set-target esp32s3
Project sdkconfig '/home/fhrbata/work/hello_world/sdkconfig' was generated
for target 'esp32s3', but environment variable IDF_TARGET is set to 'esp32'.
Run 'idf.py set-target esp32' to generate new sdkconfig file for target esp32.
---8<---
This also adds test for this use case to test_non_default_target.py.
Signed-off-by: Frantisek Hrbata <frantisek.hrbata@espressif.com>
Currently the set-target has sdkconfig file name hardcoded to the
default one and doesn't honor custom config paths or names.
IMHO the only place where we can really now the config file name
is in cmake. But also the config should be really renamed only if
the set-target action is running.
This moves the config file renaming into cmake and it's performed only
when _IDF_PY_SET_TARGET_ACTION env. var. is set to 'ON'. This should
hopefully guarantee that it's really renamed only while set-target is
running.
Signed-off-by: Frantisek Hrbata <frantisek.hrbata@espressif.com>
Extend existing target consistency checks for the two following cases.
1. Target does not match currently used toolchain
$ IDF_TARGET=esp32s2 idf.py reconfigure
$ idf.py -DIDF_TARGET=esp32c3 build
2. Target is ambiguous, because it's specified also as env. var.
IDF_TARGET=esp32s3 idf.py set-target esp32c2
Signed-off-by: Frantisek Hrbata <frantisek.hrbata@espressif.com>
The _guess_or_check_idf_target() function has sdkconfig and sdkconfig.defaults
file names hardcoded. Since config file names may be specified with SDKCONFIG
or SDKCONFIG_DEFAULTS cmake vars, directly in CMakeLists.txt or passed in with
the -D cmake option, they are not respected.
Problem is when SDKCONFIG or SDKCONFIG_DEFAULTS is set in
CMakeLists.txt. While idf can detect cmake vars passed through it
to cmake via the -D option, detecting SDKCONFIG and SDKCONFIG_DEFAULTS
vars settings in CMakeLists.txt would require to parse it. This seems
like error prone approach. Also if the vars defined by the -D option
are passed directly to cmake, not via idf, they will not be visible to idf.
It seems reasonable to move the logic into cmake, where we know the correct
SDKCONFIG and SDKCONFIG_DEFAULTS values. So the IDF_TARGET detection/guessing
is moved into targets.cmake, where the IDF_TARGET is actually set. The target
is guessed based on the following precendence.
1) $ENV{IDF_TARGET}
2) IDF_TARGET
3) SDKCONFIG
4) sdkconfig
5) SDKCONFIG_DEFAULTS if non-empty or
$ENV{SDKCONFIG_DEFAULTS} if non-empty or
sdkconfig.defaults
6) esp32
All config files referred in $ENV{SDKCONFIG_DEFAULTS} and SDKCONFIG_DEFAULTS
are searched, compared to the current behaviour. First target found in the
above chain is used.
The original _guess_or_check_idf_target() is renamed to _check_idf_target() and
used for the target consistency checks only.
The get_sdkconfig_filename() helper is now used to get the sdkconfig file
for consistency checks. It looks in SDKCONFIG specified with the -D
option and project_description.json.
With this change config full paths are reported in messages, so it's clear
e.g. from which config the target was guessed from or which config has
consistency problem. test_non_default_target.py was adjusted to this
change and also new test for testing the IDF_TARGET guessing was added.
Signed-off-by: Frantisek Hrbata <frantisek.hrbata@espressif.com>
Get project's current sdkconfig file name. It looks in SDKCONFIG cmake var
defined by the -D option and project_description.json. If not found return
default sdkconfig.
Signed-off-by: Frantisek Hrbata <frantisek.hrbata@espressif.com>
This parses cmakes cache vars defined on command line with -D options
into dictionary. It allows to simplify the check for new cache entries
and also can be re-used for other checks.
Signed-off-by: Frantisek Hrbata <frantisek.hrbata@espressif.com>
This commit fixes an issue where paths on Windows are case insensitive, for instance when setting the build folder its name would be converted to lowercase.
The culprit is our realpath() function, that was calling os.path.normcase() internally, since we are removing that call it makes sense to just remove the function entirely and call os.path.realpath() wherever necessary.
Closes https://github.com/espressif/esp-idf/issues/10282
The actual output from the build tool (CMake/Ninja) may or may not
contain color escape codes, depending on various factors. The output
written to the log file should never include color escape codes,
though. This is because color escape codes in files are usually not
rendered as "color" in editors, and complicate reading. Also escape
codes would break the regular expressions used to display hints for
compilation errors.
If stdout is a TTY (meaning that the output is not redirected), tell
the build tool (GNU Make or Ninja) to enable colorized output.
GNU Make and Ninja also check if their stdout is redirected and
strip color escape sequences in that case. CLICOLOR_FORCE environment
variable overrides this behavior.
With this change, if the compiler was launched with the
-fcolor-diagnostics flag and idf.py output is not redirected, the
final output in the terminal will be colorized.
(-fcolor-diagnostics is handled at CMake level by the previous commit)
This fixes the issue with build output not being colorized on Windows,
while the hints messages are colorized.
The issue occurred because sys.stdout and sys.stderr get overridden
by colorama.init() at runtime, but the default argument
output_stream=sys.stdout holds the reference to the"original"
sys.stdout.
colorama.init() (which, by the way, gets called via a curious chain
of imports, via idf_component_tools.manifest and tqdm package)
overrides standard streams, on Windows only. The overridden streams
contain logic to convert ANSI color codes into Windows Console API
calls to colorize the text.
Since read_and_write_stream function used the default value of
output_stream evaluated at module loading time, it was using the
original sys.stdout, not the one overridden by colorama.
One extra note is that while this does fix the coloring issue, the
solution is a bit fragile, as it relies on one of the following
(on Windows):
- colorama.init() is called (this can change if idf-component-manager
stops importing tqdm)
- Sufficiently new version of Windows 10 is used, and ANSI color codes
support is enabled in the Registry.
The actual output from the build tool (CMake/Ninja) may or may not
contain color escape codes, depending on various factors. The output
written to the log file should never include color escape codes,
though. This is because color escape codes in files are usually not
rendered as "color" in editors, and complicate reading. Also escape
codes would break the regular expressions used to display hints for
compilation errors.
If stdout is a TTY (meaning that the output is not redirected), tell
the build tool (GNU Make or Ninja) to enable colorized output.
GNU Make and Ninja also check if their stdout is redirected and
strip color escape sequences in that case. CLICOLOR_FORCE environment
variable overrides this behavior.
With this change, if the compiler was launched with the
-fcolor-diagnostics flag and idf.py output is not redirected, the
final output in the terminal will be colorized.
(-fcolor-diagnostics is handled at CMake level by the previous commit)
Add docs subcommand with options:
--no-browser - Prints url for current documentation instead of opens browser with documentation
--language - Select documentation language
--starting-page - Choice section of documentation to open
--version - Choice version of esp-idf
--target - Choice model of your target
Can still be enabled by passing --cmake-warn-uninitialized on the command line
Prevents CMake warnings printed by default if IDF_PATH is underneath the CMake
project directory.
The reason for this is that CMake --warn-uninitialized only enables checks
inside the project directory (ie top-level CMakeLists.txt directory and
subdirectories), it doesn't enable for files included from other directories.
(The only way to enable warnings in other directories is to pass
--check-system-dirs and this looks like it's only useful for CMake's own
developers as it prints a lot of warnings from inside CMake otherwise - see
https://gitlab.kitware.com/cmake/cmake/-/issues/19645 )
Plan to follow up with a later commit to clean up most of the warnings (which
aren't problems for CMake execution), but we'll also disable this option by
default to avoid this unexpected triggering of IDF warnings.
