This commit synchronizes multiple functions in queue.c with upstream v10.4.3.
Multi-core modifications are then reapplied to these functions. The following
functions were modified:
prvNotifyQueueSetContainer()
xQueueGenericCreateStatic()
xQueueGenericCreate()
xQueueGetMutexHolder()
xQueueCreateCountingSemaphoreStatic()
xQueueCreateCountingSemaphore()
xQueueGenericSend()
xQueueGenericSendFromISR()
xQueueReceiveFromISR()
uxQueueMessagesWaiting()
prvUnlockQueue()
prvIsQueueFull()
xQueueAddToSet()
xQueueRemoveFromSet()
prvNotifyQueueSetContainer()
Note: The SEGGER_SYSVIEW traceQUEUE_SEND() macro was updated as the
xCopyPosition argument is no longer available in scenarios where the
macro is called.
This commit synchronizes the following xTaskRemoveFrom...EventList() with
upstream v10.4.3. Multi-core modifications are then reapplied to the
functions.
The functions updated are:
- xTaskRemoveFromEventList()
- vTaskRemoveFromUnorderedEventList()
The following multi-core macros have been removed as they are no longer
required.
- tskCAN_RUN_HERE()
- taskYIELD_OTHER_CORE()
This commit synchronizes the following vTaskPlaceOnEventList...() with
upstream v10.4.3.
The functions updated are:
- vTaskPlaceOnEventList()
- vTaskPlaceOnUnorderedEventList()
- vTaskPlaceOnEventListRestricted()
The traceTASK_DELAY_UNTIL() macro has also been updated.
This commit reverts the previous "taskENTER_CRTIICAL();" so that the argument
is now provided for better code readability. The names of the spinlocks have
also been updated.
This commit updates various FreeRTOS functions to call the newly added
prvCheckForYield() and prvCheckForYieldUsingPriority() when checking for
yielding. This allows the source code to match upstream more closely.
When a FreeRTOS function unblocks a task, that function will check whether
the unblocked task requires a yield to be called. This is currently done by
having each function individually check if the unblocked task has a higher
priority than the both cores, and yielding the appropriate core.
This commit adds the macros list below to abstract away the yielding checking
procedure. This will allow the code to match upstream more closely.
- prvCheckForYield()
- prvCheckForYieldUsingPriority()
The event group unit tests would previously use a single call bit (the
"BIT_CALL" macro) to unblock all the test tasks. However, if one or more tasks
were delayed in calling xEventGroupWaitBits(), the other tasks would clear the
test bits, leading to the test deadlocking.
This commit updates the bits used so that each task gets their own CALL and
RESPONSE bits.
For RISC-V and Xtensa targets, in case a panic needs to happen when
Task WDT is triggered (ESP_TASK_WDT_PANIC), the interruptee's stack
is now used for printing the backtrace.
Abort after Task Watchdog is triggered can happen on APP CPU (second core).
Closes https://github.com/espressif/esp-idf/issues/7207
The description of how the xTaskGenericNotifyWait parameter is handled in the
xTaskGenericNotifyWait() function was inaccurate.
In this commit, the description was updated to match the implementation of xTaskGenericNotifyWait().
This commit marks all functions in interrupt_controller_hal.h, cpu_ll.h and cpu_hal.h as deprecated.
Users should use functions from esp_cpu.h instead.
This function removes the following legacy atomic CAS functions:
From compare_set.h (file removed):
- compare_and_set_native()
- compare_and_set_extram()
From portmacro.h
- uxPortCompareSet()
- uxPortCompareSetExtram()
Users should call esp_cpu_compare_and_set() instead as this function hides the details
of atomic CAS on internal and external RAM addresses.
Due to the removal of compare_set.h, some missing header includes are also fixed in this commit.
This commit fixes vTaskSuspendAll() and xTaskResumeAll() in the following ways.
- For vTaskSuspendAll()
- Sync function source code with upstream single core version
- Clearly mark IDF additions
- For xTaskResumeAll()
- Sync function source code with upstream single core version
- Clearly mark IDF additions
- Fix bug where cores other than core 0 were allowed to unwind pended ticks
This commit fixes the following issues:
- Clearly mark IDF additions in vTaskStepTick() and xTaskCatchUpTicks()
- Add back vTaskSuspendAll()/xTaskResumeAll() to xTaskCatchUpTicks(). Scheduler
suspension and resumption is required to unwind the pended ticks.
Previously, xTaskIncrementTick() would always trigger a yield (i.e., return pdTRUE)
when called on core 1. This would mean core 1 would call vTaskSwitchContext() on
every tick, leading to uneccesary CPU overhead.
This commit fixes xTaskIncrementTick() in the following ways:
- Clearly mark IDF additions in xTaskIncrementTick()
- Moved esp_vApplicationTickHook() to be called direclty in xPortSysTickHandler() in order to
simplify xTaskIncrementTick().
- Only core 0 calls xTaskIncrementTick() in order to simplify the function's logic. Core 0 is
solely responsible for managing xTickCount and xPendedTicks
- All other cores call xTaskIncrementTickOtherCores() instead which is a simplified version of
xTaskIncrementTick() and handles the following:
- Check if core 0 has unblocked a higher priority task to run
- Check if the current core requires time slicing
- Call vApplicationTickHook()
This commit fixes the following:
- Fixes a bug wherein the timer status is active for oneshot timers that
expire before they are started.
- Callback calls for periodic timers where made before the timers were
auto-reloaded.
- Timer expiry trace was being set after the timer callback is called.
Closes https://github.com/espressif/esp-idf/issues/8014
Idle tick hook that indicates completion of scheduler init must be launched
on other core than the one where main task runs. Earlier it was assumed that
main task shall always run on PRO cpu but that behavior can be changed with
ESP_MAIN_TASK_AFFINITY_CPU1 and hence this fix.
Closes https://github.com/espressif/esp-idf/issues/9247
Closes IDFGH-7705
FreeRTOS uses a single "xSchedulerRunning" variable to tack whether the
scheduler has started, and this variable is set to "pdTRUE" by core 0
via calling vTaskStartScheduler().
However, with SMP FreeRTOS, there is a race condition where core 0 has
already started the scheduler and another core has not called xPortStartScheduler()
yet and calls some FreeRTOS API. Thus the resultant FreeRTOS API can
cause errors as it thinks the scheduler has started.
This commit adds a temporary workaround (by having each core maintain their
own "xSchedulerRunning" variable.
The "FreeRTOS Event Groups" main task will only wait a single tick for the created
tasks to set their response bits. This short delay may not be sufficent if the tick
frequency is high.
This commit updates the test so that
- the main task waits indefinitely for all the response bits to be set.
- created tasks are cleand up by the main task
FreeRTOS synchronization primitives (e.g., queues, eventgroups) use various event lists (i.e., task lists) to track what
tasks are blocked on a current primitive. Usually these event lists are accessed via one of the event lists functions
(such as vTask[PlaceOn|RemoveFrom]UnorderedEventList()), which in turn ensure that the global task list spinlock
(xTaskQueueMutex) is taken when accessing these lists.
However, some functions in event_groups.c manually traverse their event lists. Thus if a tick interrupt occurs on
another core during traversal and that tick interrupt unblocks a task on the event list being traversed, the event list
will be corrupted.
This commit modifies the following event_groups.c functions so that they take the global task list lock before
traversing their event list.
- xEventGroupSetBits()
- vEventGroupDelete()
The CONFIG_FREERTOS_PLACE_FUNCTIONS_INTO_FLASH allows some FreeRTOS functions to be placed
into flash, thus saving some IRAM. However, this feature was previously not supported for
SMP FreeRTOS.
This commit adds CONFIG_FREERTOS_PLACE_FUNCTIONS_INTO_FLASH support for SMP FreeRTOS. There
are now separate linker fragment files for IDF FreeRTOS and SMP FreeRTOS, named "linker.lf"
and "linker_smp.lf" respectively.
The TLSP deletion callback feature is not compatible with the CONFIG_FREERTOS_ENABLE_STATIC_TASK_CLEAN_UP
option. However, the "freertos_options" unit test configuration will enable that option.
This commit disables all CONFIG_FREERTOS_ENABLE_STATIC_TASK_CLEAN_UP related features when compiling with
SMP FreeRTOS.
prvYieldCore() leads to an array-out-of-bounds error when compiled with
-Os optimization and configNUM_CORES = 1. This commit avoids this
compile warning by compiling out the part of code which is unnecessary
when configNUM_CORES is 1.
The Xtensa FreeRTOS port does not save the threadptr register when
doing a voluntary yield. This can result in a crash when multiple
tasks used the threadptr register and call "taskYIELD()".
This commit adds the threadptr register to the solicited stack frame.
This commit makes changes to cpu_ll.h, cpu_hal.h, and interrupt_controller_hal.h:
- Moved to esp_hw_support in order to be deprecated in the future
- HAL/LL API now route their calls to esp_cpu.h functions instead
Also updated soc_hal.h as follows:
- Removed __SOC_HAL_..._OTHER_CORES() macros as they dependend on cpu_hal.h
- Made soc_hal.h and soc_ll.h interfaces always inline, and removed soc_hal.c.
This commit also updates the XCHAL_ERRATUM_572 workaround by
- Removing it's HAL function and invoking the workaround it directly the bootloader
- Added missing workaround for the ESP32-S3
Previously the RV port was routing IDF style critical section API to call FreeRTOS style critical section API.
For example, a call to "portENTER_CRITICAL(mux)" would eventually call `vTaskEnterCritical()" via the following call flow:
- portENTER_CRITICAL(mux)
- vPortEnterCritical()
- portSET_INTERRUPT_MASK_FROM_ISR()
- vTaskEnterCritical()
This commit fixes the IDF style critical section by making sure that they are completely orthogonal to FreeRTOS critical sections
This commit fixes the following build errors in SMP FreeRTOS when building with GCC 11:
- "-Wattributes" warning due to conflicting attributes on xPortInterruptedFromISRContext()
- "-Wtype-limits" warning due to taskVALID_CORE_ID() not casting xCoreID
The behavior of vTaskSuspendAll() has changed in SMP FreeRTOS. This commit
disables scheduler suspension related unit tests for SMP FreeRTOS.
The tests will be updated in IDF-5201
SMP FreeRTOS adds support for dynamic reentrancy in the following commit:
34b8e24d7c
This commit does the following:
- Pulls in the upstream changes
- Move __getreent() to "freertos_tasks_c_additions.h"
- Add the required configNEWLIB_REENTRANT_IS_DYNAMIC to SMP FreeRTOS port
The "Test Queue sets thread safety" tests relied on IDF FreeRTOS specific
scheduling behavior, thus resulting in the test getting stuck when running
with SMP FreeRTOS.
This commit updates and refactors the tests to work on both IDF and SMP FreeRTOS.
This commit fixes how SMP FreeRTOS feeds the INT WDT. Previously, the
port used vApplicationTickHook(). Now, all cores will feed the INT WDT
in xPortSysTickHandler().
This commit moidifies the TWDT as follows:
- Adds a feature to allows subscribing arbitrary users to the TWDT
- Changes esp_task_wdt_init() API to accept configuration structure
- Changes esp_task_wdt_init() and esp_task_wdt_deinit() to subscribe/unsubscribe
idle tasks of various cores.
- Adds support for SMP FreeRTOS idle tasks
- Updates startup code TWDT initialization
- Updates API documentation
This commit refactors FreeRTOS Kconfig options as follows:
- Grouped them into Kernel and Port submenus
- Renamed Kernel option promppts to match upstream names
- Simplified some option descriptions
- Added "Todo" markers related to SMP support
`vTaskGetSnapshot` is being used in coredump module to collect diagnostic information.
It is possible that input arguments are invalid and `assert` in this situation is not
correct.
This commit modifies API signature to return pdTRUE in case of success, and pdFALSE
otherwise. Caller can verify return value and then take appropriate decision.
This commit updates how the TLS pointers deletion callbacks are called
during task deletion in the FreeRTOS SMP kernel. The callbacks are now
routed through the portCLEAN_UP_TCB() macro. This commit also adds a
new kconfig option CONFIG_FREERTOS_TLSP_DELETION_CALLBACKS to control
the enablement of the TLSP deletion callbacks.
This commit moves the IDF API additions from task.h/task.c to seperate header/source files.
- Declarations moved to "idf_additions.h"
- Definitions moved to "freertos_task_c_additions.h"
The API descriptions have also been updated.
esp_timer will be added as a dependency to freertos only if
CONFIG_FREERTOS_RUN_TIME_STATS_USING_ESP_TIMER is enabled.
Other components are updated to add esp_timer as public or private
dependency, as needed.
This removes esp_timer from the default list of public dependencies.
Some components were including esp_timer.h without declaring a
dependency on esp_timer component. This used to work due to a
transitive public dependency on esp_timer from freertos component.
Add explicit dependencies where needed.
Also some source files were using esp_timer functions without
including the header file. This used to work because esp_timer.h was
included from freertos port header file. This commit adds esp_timer.h
includes where needed.
Moved the following kconfig options out of the target component:
* CONFIG_ESP*_DEFAULT_CPU_FREQ* -> esp_system
* ESP*_REV_MIN -> esp_hw_support
* ESP*_TIME_SYSCALL -> newlib
* ESP*_RTC_* -> esp_hw_support
Where applicable these target specific konfig names were merged into
a single common config, e.g;
CONFIG_ESP*_DEFAULT_CPU_FREQ -> CONFIG_ESP_DEFAULT_CPU_FREQ_MHZ
This commit disables portUSING_MPU_WRAPPERS for the FreeRTOS SMP xtensa port.
This was previously enabled due to the need to keep a CPSA (coprocessor save
area pointer) in the TCB. The CPSA pointer is now calculated at run time.
This commit updates the usage of idle hooks in SMP FreeRTOS as follows:
- IDF style idle hooks are now called from vApplicationMinimalIdleHook()
- If the user provdies their own vApplicationMinimalIdleHook(), it can be
wrapped using -Wl,--wrap if CONFIG_FREERTOS_USE_MINIMAL_IDLE_HOOK is
enabled.
- SMP port no longer uses vApplicationIdleHook() as it's only called from
the prvIdleTask() and not every prvMinimalIdleTask()
This commit updates the task snapshot unit tests as follows:
- Both uxTaskGetSnapshotAll() and vTaskGetSnapshot() are now both tested
- Test cases are now dependent on CONFIG_FREERTOS_ENABLE_TASK_SNAPSHOT
This commit updates task snapshot as follows:
- Refactored implementation to increase readability
- Implementation moved into freertos_tasks_c_additions.h
- freertos_tasks_c_additions.h made a private header
- Support SMP FreeRTOS
- Removed configENABLE_TASK_SNAPSHOT option. CONFIG_FREERTOS_ENABLE_TASK_SNAPSHOT
is direclty used instead.
IDF FreeRTOS uses vTaskSuspendAll()/xTaskResumeAll() to stop preemption
on a particular core. However, those functions behave differently in FreeRTOS SMP.
This commit replaces all calls of vTaskSuspendAll()/xTaskResumeAll() with
vTaskPreemptionDisable()/vTaskPreemptionEnable() when compiling with SMP FreeRTOS.
This commit fixes various build errors in IDF (and tests) when compiling
with SMP FreeRTOS:
- Updated usage of xTaskGetIdleTaskHandle()
- Disable sysview tracing macros
- Update some task snapshot functions
- Disabled test_freertos_hooks.c test as vApplicationIdleHook() and
vApplicationTickHook() are used.
This commit updates the copied Xtensa port to support the new porting interfaces
of the FreeRTOS SMP kernel. These modifications are mainly contained in
- FreeRTOSConfig.h
- FreeRTOSConfig_smp.h
- portmacro.h
- port.c
Some porting interfaces have changed in FreeRTOS SMP. In order to allow building
with IDF, compatibility interfaces have been added.
This commit does the following:
- Add a Kconfig option to select between the IDF FreeRTOS kernel and the
FreeRTOS SMP kernel.
- Updates the freertos component's CMakeLists.txt so that FreeRTOS SMP
files are now built based the the new configuration option.
This commit WILL NOT compile. The port files for FreeRTOS SMP still need to
be updated.
This commit copies over ESP-IDF Xtensa portable files to the
FreeRTOS-Kernel-SMP directory. No changes were made, this commit
only copies the portable source files.
Notes:
- This commit WILL NOT compile
- Some SPDX header dates were updated to pass pre-commit check
This commit copies over the sources files from
https://github.com/FreeRTOS/FreeRTOS-Kernel/tree/smp based on the
commit 4832377117b4198db43009f2b548497d9cdbf8da
The FreeRTOS SMP sources are added to components/freertos/FreeRTOS-Kernel-SMP
Notes:
- This commit WILL NOT compile correctly. It simply copies over sources files
- copyright_ignore.txt entries added so that we can avoid using SPDX headers
- Portable files are not added yet
This commit updates the visibility of various header files and cleans up
some unnecessary inclusions. Also, this commit removes certain header
include paths which were maintained for backward compatibility.
Moved the following kconfig options out of the target component:
* ESP32_X_BROWNOUT_* -> esp_system
* ESP32_X_DEBUG_OCDAWARE -> esp_system
* APP_NO_BLOBS -> build type (main kconfig)
This commit refactors the FreeRTOS configuration headers as follows:
- Layout is now similar to FreeRTOSConfig.h found in other upstream demos
- Separate out Vanilla FreeRTOS configurations and ESP-IDF additions
- Move/remove some irrelevant/unused macros and configurations
This commit removes the usage of all legacy FreeRTOS data types that
are exposed via configENABLE_BACKWARD_COMPATIBILITY. Legacy types can
still be used by enabling CONFIG_FREERTOS_ENABLE_BACKWARD_COMPATIBILITY.
This commit adds a CHOOSE_MACRO_VA_ARG() selector to allow selection between two
versions of a macro based on the number of arguments. This replaces the previous
portGET_ARGUMENT_COUNT() selector.
- portYIELD_FROM_ISR() now uses CHOOSE_MACRO_VA_ARG()
- portYIELD_FROM_ISR(arg) version added to risc-v port
- Old vPortEvaluateYieldFromISR() and portGET_ARGUMENT_COUNT removed
These were called from IRAM context where the caller expect them to be inlined
and accessible when cache is disabled. This was not the case when compiled with -O0.
Closes https://github.com/espressif/esp-idf/issues/8301
This commit does the following:
- Adds SPDX license identifiers to FreeRTOS sources. Remove those FreeRTOS sources from
the copyright ignore list.
- Update xtensa port files to match FreeRTOS v10.4.3. Added SPDX license identifiers
to the port files.
- Fixed some improperly licensed files
- Removed portbenchmark.h from RISC-V port
Upstream xtensa exception handling will save PS, PC, and a0 registers
together when saving a minimal context. This commit ppdates the xtensa
exception handling to match upstream behavior.
The following files were deleted:
- components/esp_hw_support/include/soc/cpu.h
- components/soc/esp32s3/include/soc/cpu.h
The following functions are deprecated:
- get_sp()
The following functions declared in soc/cpu.h are now moved to esp_cpu.h:
- esp_cpu_configure_region_protection()
The following functions declared in soc/cpu.h are now moved to components/xtensa/include/esp_cpu_utils.h:
- esp_cpu_process_stack_pc()
All files with soc/cpu.h inclusion are updated to include esp_cpu.h instead.
Signed-off-by: Sudeep Mohanty <sudeep.mohanty@espressif.com>
xPortStartScheduler calls vPortSetupTimer -> _frxt_tick_timer_init,
which enables tick timer interrupt and sets up the first timeout.
From that point on, the interrupt can fire. If the interrupt happens
while _frxt_dispatch is running, the scheduler will enter an infinite
loop. This is because _frxt_dispatch isn't supposed to be preemptable,
and the tick interrupt will overwrite some of the registers used by
_frxt_dispatch.
Note that this situation doesn't practically occur on the real
hardware, where the execution of vPortSetupTimer and _frxt_dispatch
happens quickly enough. However it can be reproduced on an emulator
if the tick period is set to 1ms.
Add an explicit call to portDISABLE_INTERRUPTS in xPortStartScheduler
to guarantee that _frxt_dispatch doesn't run with interrupts enabled.
This is similar to the esprv_intc_int_set_threshold(1); call in
RISC-V version of port.c.
This commit removes the portmacro.h include from task.h as portmacro.h
gets pulled in via FreeRTOS.h. This aligns with upstream FreeRTOS code.
Signed-off-by: Sudeep Mohanty <sudeep.mohanty@espressif.com>
This commit updates the handles for the timer, task and event_group
modules to struct type. This matches upstream freertos source.
Signed-off-by: Sudeep Mohanty <sudeep.mohanty@espressif.com>
This commit adds missing INCLUDE_ configurations to FreeRTOSConfig.h for
the following functions:
- xTaskAbortDelay()
- xTaskGetHandle()
Unit tests for these functions were also added.
Closes https://github.com/espressif/esp-idf/issues/7902
This issue was earlier fixed in commit 79e74e5d5f
but during migration to newer FreeRTOS release, it got introduced again.
This commit fixes thread safety issues with configASSERT() calls
regarding the value of uxSchedulerSuspended. A false negative
occurs if a context switch to the opposite core occurs in between
the getting the core ID and the assesment.
Relevant https://github.com/espressif/esp-idf/issues/4230
Closes https://github.com/espressif/esp-idf/issues/7726
Closes IDFGH-6041
Add TRY_ENTRY_CRITICAL() API to all for timeouts when entering critical sections.
The following port API were added:
- portTRY_ENTER_CRITICAL()
- portTRY_ENTER_CRITICAL_ISR()
- portTRY_ENTER_CRITICAL_SAFE()
Deprecated legacy spinlock API in favor of spinlock.h. The following API were deprecated:
- vPortCPUInitializeMutex()
- vPortCPUAcquireMutex()
- vPortCPUAcquireMutexTimeout()
- vPortCPUReleaseMutex()
Other Changes:
- Added portMUX_INITIALIZE() to replace vPortCPUInitializeMutex()
- The assembly of the critical section functions ends up being about 50 instructions longer,
thus the spinlock test pass threshold had to be increased to account for the extra runtime.
Closes https://github.com/espressif/esp-idf/issues/5301
This function resets the spinlock given as a parameter after taking it
(when entering the critical section). This then results in a panic once
it tries to exit the same critical section.
* Closes https://github.com/espressif/esp-idf/issues/7725
The previous SMP freertos round robin would skip over tasks when
time slicing. This commit implements a Best Effort Round Robin
where selected tasks are put to the back of the list, thus
makes the time slicing more fair.
- Documentation has been updated accordingly.
- Tidy up vTaskSwitchContext() to match v10.4.3 more
- Increased esp_ipc task stack size to avoid overflow
Closes https://github.com/espressif/esp-idf/issues/7256
The following changes have been made:
1. All FreeRTOS kernel source files are now placed in the
freertos/FreeRTOS-Kernel folder to match with the upstream folder structure.
2. All kernel include files are now placed in freertos/FreeRTOS-Kernel/include.
3. All port files are now placed in freertos/FreeRTOS-Kernel/portable.
4. All additions/customizations are placed in freertos/esp_additions.
5. All other miscellaneous files (README, License files etc.) are moved to
freertos/FreeRTOS-Kernel folder to match with the upstream.
6. Updated esp-cryptoauthlib to latest commit to resolve FreeRTOS
include dependencies.
Signed-off-by: Sudeep Mohanty <sudeep.mohanty@espressif.com>
This commit removes the following critical nested macros as follows:
- portENTER_CRITICAL_NESTED()
- portEXIT_CRITICAL_NESTED()
They are replaced with portSET_INTERRUPT_MASK_FROM_ISR() and
portCLEAR_INTERRUPT_MASK_FROM_ISR() which are the proper FreeRTOS interfaces.
Created a portmacro_deprecated.h for each port to contain deprecated API
that were originally from portmacro.h
This commit adds the following hook functions to obtain memory
for the IDLE and Timer Daemon tasks when configSUPPORT_STATIC_ALLOCATION
is enabled:
- vApplicationGetIdleTaskMemory()
- vApplicationGetTimerTaskMemory()
Currently, both functions simply allocate from the same memory as
regular tasks (i.e., internal memory for both the stack and TCB)
Closes https://github.com/espressif/esp-idf/issues/7511
Added DOC_EXCLUDE_SECTION section tag to conditionally remove sections
from FreeRTOS source files which we don't want in IDF API docs.
Added DOC_SINGLE_GROUP section tag to enable a flat document for
FreeRTOS and removing groups.
With these conditional tags, we can upstream FreeRTOS files without
affecting the upstream documentation.
Signed-off-by: Sudeep Mohanty <sudeep.mohanty@espressif.com>
- port.c and portmacro.h contents are now logically grouped
- Doxygen API descriptions added
- Added refactor todo markers
- Removed portmacro_priv.h. Contents now in portmacro.h
- Formatted files
Moved FreeRTOSConfig.h from include/freertos to include/esp_additions/freertos.
Updated FreeRTOS.h file to include FreeRTOSConfig.h without the
freertos/ prefix to match with the upstream file.
Renamed architecture specific FreeRTOSConfig.h files to FreeRTOSConfig_arch.h
Signed-off-by: Sudeep Mohanty <sudeep.mohanty@espressif.com>
components/os: Move ETS_T1_WDT_INUM, ETS_CACHEERR_INUM and ETS_DPORT_INUM to l5 interrupt
components/os: high level interrupt(5)
components/os: hli_api: meta queue: fix out of bounds access, check for overflow
components/os: hli: don't spill registers, instead save them to a separate region
Level 4 interrupt has a chance of preempting a window overflow or underflow exception.
Therefore it is not possible to use standard context save functions,
as the SP on entry to Level 4 interrupt may be invalid (e.g. in WindowUnderflow4).
Instead, mask window overflows and save the entire general purpose register file,
plus some of the special registers.
Then clear WindowStart, allowing the C handler to execute without spilling the old windows.
On exit from the interrupt handler, do everything in reverse.
components/bt: using high level interrupt in lc
components/os: Add DRAM_ATTR to avoid feature `Allow .bss segment placed in external memory`
components/bt: optimize code structure
components/os: Modify the BT assert process to adapt to coredump and HLI
components/os: Disable exception mode after saving special registers
To store some registers first, avoid stuck due to live lock after disabling exception mode
components/os: using dport instead of AHB in BT to fix live lock
components/bt: Fix hli queue send error
components/bt: Fix CI fail
# Conflicts:
# components/bt/CMakeLists.txt
# components/bt/component.mk
# components/bt/controller/bt.c
# components/bt/controller/lib
# components/esp_common/src/int_wdt.c
# components/esp_system/port/soc/esp32/dport_panic_highint_hdl.S
# components/soc/esp32/include/soc/soc.h
Moved the inclusion of esp_compiler.h from FreeRTOS.h to
the app specific FreeRTOSConfig.h where the unlikely()
macro is used. This change is in alignment with the upstream
FreeRTOS.h file.
Signed-off-by: Sudeep Mohanty <sudeep.mohanty@espressif.com>
xSemaphoreAltTake and xSemaphoreAltGive are Espressif defined macros and
are not being used. The respective definitions, xQueueAltGenericReceive
and xQueueAltGenericSend are also not part of current FreeRTOS source
(v10.4.3). Hence, removed xSemaphoreAltTake and xSemaphoreAltGive
definitions to align with upstream code.
Signed-off-by: Sudeep Mohanty <sudeep.mohanty@espressif.com>
systimer was stopped because the option SYSTIMER_TIMER_UNIT1_CORE1_STALL_EN is set by default 1, it blocks counting.
For Unicore should be:
SYSTIMER_TIMER_UNIT1_CORE0_STALL_EN 1
SYSTIMER_TIMER_UNIT1_CORE1_STALL_EN 0
* ##__VA_ARGS__ is replaced by __VA_OPT__(,)
and __VA_ARGS if C++20 is used.
* Affected header files are: esp_log.h,
portmacro.h and esp_check.h
* Closes https://github.com/espressif/esp-idf/pull/6692
portGET_ARGUMENT_COUNT uses a GCC extension ##__VA_ARGS__. It forces
the user to compile the code with GNU extensions enabled instead of ISO
language standard. The suggested change is to replace ##__VA_ARGS__ with
__VA_OPT__(,) __VA_ARGS__ which is supported by the current version of
GCC used in ESP-IDF for both C and C++ ISO standards.
This fix would enable ESP-IDF users to compile their code with ISO C++20
standard in future releases.
Signed-off-by: Jakob Hasse <jakob.hasse@espressif.com>
1. Add conditions based on Kconfig options for functions which are
compiled based on those options.
2. Static allocation is always enabled, move corresponding functions
into the common list.
Since dd849ffc, _rodata_start label has been moved to a different
linker output section from where the TLS templates (.tdata, .tbss)
are located. Since link-time addresses of thread-local variables are
calculated relative to the section start address, this resulted in
incorrect calculation of THREADPTR/$tp registers.
Fix by introducing new linker label, _flash_rodata_start, which points
to the .flash.rodata output section where TLS variables are located,
and use it when calculating THREADPTR/$tp.
Also remove the hardcoded rodata section alignment for Xtensa targets.
Alignment of rodata can be affected by the user application, which is
the issue dd849ffc was fixing. To accommodate any possible alignment,
save it in a linker label (_flash_rodata_align) and then use when
calculating THREADPTR. Note that this is not required on RISC-V, since
this target doesn't use TPOFF.
Noted as a problem with thread local storage returning a different task's
pointers, but some other were APIs also accessing current task unsafely.
Regression in FreeRTOS 10 update a3c90bf59a
Causes test added in parent commit to pass.
This race happens if the deleted task is running on the other CPU,
and is already spinning in a critical section waiting for xTaskQueueMutex
because it's about to be blocked for a resource.
The "deleted" task would end up blocked, possibly indefinitely, and
never actually deleted or its resources cleaned up by the idle tasks.
Details:
vTaskDelete() adds the target task to the xTasksWaitingTermination list,
expecting it to be yielded off CPU and then cleaned up later. However as soon as
vTaskDelete() releases xTaskQueueMutex, the target task runs and moves itself to the
xDelayedTaskList1. Because interrupts are already disabled on that CPU,
the "yield" to the other CPU sent by the vTaskDelete() comes afterward so
doesn't help.
Fixes issue with DPORT init task, this task uses minimum stack size and may not be
enough if stack smashing detection is set to Overall mode.
Also reworks the way we calculate minimum stack to allow for adding multiple
contributing factors.
Closes https://github.com/espressif/esp-idf/issues/6403
Unless the option for "assert and keep running" is enabled.
This means that silent asserts now work for FreeRTOS, and disabling asserts
now also disables them in FreeRTOS without needing a separate config change.
Related to https://github.com/espressif/esp-idf/issues/6306
NOP instructions have been added in order to prevent the code
from executing code it shouldn't execute. This is due to a delay
between the moment an interrupt is requested and the moment it
is fired. It only happens on RISC-V SoC.
Enable shared stack watchpoint for overflow detection
Enable unit tests:
* "test printf using shared buffer stack" for C3
* "Test vTaskDelayUntil" for S2
* "UART can do poll()" for C3
Removed leftover code-paths that were never taken. Upstream freertos uses
vTaskSuspendAll() and xTaskResumeAll(), and therefor check if the task already
yielded.
In the IDF port of freertos we use critcal sections instead, so xAlreadyYielded
will never be set.
Partially addresses https://github.com/espressif/esp-idf/issues/6440
rtos_int_exit would store RA at an offset of 4 byte from the SP,
where the offset should be 0.
This caused rtos_int_exit to overwrite variables in bss.
The riscv vectors.S in riscv component contains the trap vector, which is responsible to
defer interrupts and examine if a task context switch is needed, this change cleans up
this code by hiding all freertos details behind on two functions rtos_it_enter/exit and
their implementations are placed in freertos riscv port files.
Add `xQueueGenericReceive` as that has been removed in FreeRTOS10.
This in turn breaks pre-builts libraries with earlier IDF releases
relying on this API.
Closes https://github.com/espressif/esp-wolfssl/issues/6
freertos: replace the freertos regular malloc to the specific malloc from xtensa port for tcb and stack allocations
freertos: avoid the cpu1 to unwind pended ticks when xTaskResumeAll is called insed of an ISR
freertos: protected the xPortGetCoreID functions with missing critical sections
tests: re-eanble the ignored tests that was failling before race-condition fixes
freertos/port: update the port files and split into xtensa and riscv ports
freertos: separated cpu files from rest of the kernel sources
freertos/port_xtensa: separated private include files into a folder
freertos/tasks: added task create pinned to core function do not break current IDF API
freertos/tasks: mimiced task create pinned function into tasks.c to do not break the IDF API.
freertos: freertos component now compiling
freertos: freertos component now building
freertos: moved critical sections outside from FR kernel section to portable section
portmacro_xtensa: add void indentifier on functions that take no arguments
freertos: fix critical sections implementation to match with their function prototype
freertos: add cmake changes of freertos into make
freertos: remove portDONT_DISCARD attribute from switch context function, it was breaking the docs building.
freertos: fix conflicitng types of vApplicationSleep function
license: update the license of freertos
freertos: Doxygen comments refactored to render them correctly on docs
freertos: added new functions of freertos into the documentation
freertos: added message buffers and stream buffers to documentation
sysview: update freertos system view to the compatible with version 10
freertos: fixed event group documentation rendering
freertos: update static task structure to match the actual tcb size
freertos: removed backported test functions
freertos/smp: brought SMP code to FreeRTOS 10 port
freertos/portmacro: added missing crosscore interrupt for yielding tasks
freertos: replaced soft-critical sections with hard-critical sections used by SMP
freertos: placed muxes inside of kernel objects
freertos: replaced original FR critical sections with SMP enabled spinlocks critical sections
freertos: moved xtensa port files to a separated folder
freertos: added multiple instance of global variables required to SMP
freertos: added SMP modifications on specific tasks module functions
freertos: added TLS deletion function to task module
freertos/tls: initialize TLS deletion callback to avoid crashing when calling task delete
freertos: modified vTaskDelete to do not erase current task that runs on other core
freertos: reverted taskhandle and timerhandle as void* type
freertos: fixed de-referencing void pointer to get run time counter
freertos: fix system view trace enter macro arguments
freertos: Replaced soft critical sections with spinlocks on event_groups
freertos: fixed tick function to avoid calling tick hooks twice
freertos: Nofity give checking per CPU if schedule is suspended
freertos: added mpu release on TCB deletion
freertos: Added SMP changes when deleting a TCB on idle task
freertos/license: update freertos license in COPYRIGHT.rst
freertos: unicore configurations can use task create pinned to core, it will be always pinned to core 0
freertos/portmacro: added cpu_hal_get_core_id() function instead of inline assembly
freertos/xtensa: update xtensa specific files used in master branch
newlib/locks: revert the preemption checking in lock acquisition and release
ref_clock: fix initial state of ref_clock interrupt handler
freertos: added missing critical sections and yielding checkings
freertos: remove magic numbers in vTaskDelete
freertos: added missing critical section in prvIsQueueEmpty
esp_system: removed repeated interrupt allocator code and moved common code to esp_system
xtens: moved xtensa specific code from freertos to the xtensa component
hal/interrupt_controller: added interrupt controller hal and ll files
docs: update the doxyfile with new location of esp_itr_alloc.h file
xtensa: fixed dangerous relocation problem after moving xtensa interrupt files out of freertos
docs: removed Xtensa reference from intr_allocator api-reference
xtensa: pushed the interrupt function that manages non iram interrupts to the xtensa layer
esp_system/test: fixed platform dependent setting for intr_allocator tests
hal: rename the functions used to manage non iram interrupt mask.
correct generation.py script to be silent when file: function is not in the object list (just ignore placement)
correct linker.lf to place task functions into flash if CONFIG_FREERTOS_TASK_FUNCTIONS_INTO_FLASH is active otherwise into IRAM
update kconfig option to place functions into IRAM
update linker file after tests
fix spi_device_polling_end crash when xTaskGetTickCount() in flash
disable "yield from lower priority task, other CPU" test case when placing rtos functions into flash
upadate ut app config freertos_flash
combine spi_flash driver and freertos ut configs into one file
remove TEST_EXCLUDE_COMPONENTS
ci: fix ut job
remove functions that are called from ISR funcs
add port module functions to place into Flash
place snapshot funcs into Flash when ESP_PANIC_HANDLER_IRAM is not set
ci: add job with tags UT_T1_GPIO,ESP32_IDF
Commit 891eb3b0 was fixing an issue with PS and EPC1 not being
preserved after the window spill procedure. It did so by saving PS in
a2 and EPC1 in a4. However the a4 register may be a live register of
another window in the call stack, and if it is overwritten and then
spilled to the stack, then the corresponding register value will end
up being corrupted. In practice the problem would show up as an
IllegalInstruction exception, when trying to return from a function
when a0 value was 0x40020.
Fix by using a0 register instead of a4 as scratch. Also fix a comment
about xthal_save_extra_nw, as this function in fact doesn't clobber
a4 or a5 because XCHAL_NCP_NUM_ATMPS is defined as 1.
Closes https://github.com/espressif/esp-idf/issues/5758
* changing dependencies from unity->cmock
* added component.mk and Makefile.projbuild
* ignore test dir in gen_esp_err_to_name.py
* added some brief introduction of CMock in IDF
CONFIG_FREERTOS_ISR_STACKSIZE was set to 2100 when ELF core dump was
enabled, which resulted in a non-16-byte-aligned interrupt stack
offset. This triggered "is SP corrupted" check in the backtrace,
terminating the backtrace early.
Fix the default value, and make sure that the stack is always aligned,
regardless of the value of CONFIG_FREERTOS_ISR_STACKSIZE.
This MR uses an intermediary function `start_app` to call after system
initialization instead of `app_main`.
In RTOS builds, freertos provides `start_app` and calls `app_main`.
In non-RTOS builds, user provides `start_app` directly.
Changes the startup flow to the ff:
hardware -> core libraries init -> other libraries init -> os
init (optional) -> app_main
- hardware init resides in the port layer, and is the entry point
- core libraries init executes init functions of core components
- other libraries init executes init functions of other components (weak
references)
- after other lib is init, the app_main function is called, however,
an OS can wrap the real call to app_main to init its own stuff, and
*then* call the real app_main
FreeRTOS scheduler uses additional stack space, as in some functions
variables are placed onto the stack instead of registers.
This issue resulted in occasional stack overflows in dport task, when
compiling at -O0 optimization level.
- Increase the configMINIMAL_STACK_SIZE to 1kB.
- Enable the watchpoint at the end of stack in CI startup test for
this optimization level.
This fixes the issue where XTOS_SET_INTLEVEL would lower INTLEVEL from
4 to 3, when eTaskGetState is invoked during the core dump, triggered
from the interrupt watchdog.
