Ivan Grokhotkov
c001553027
ethernet: add event declarations
2019-04-11 12:04:58 +08:00
morris
7528dc0f20
ethernet: support new PHY (IP101)
...
1. Add support for new PHY IP101.
2. Re-enable GPIO0 output mode.
3. Clean up some docs.
2019-01-29 14:08:35 +08:00
morris
b6d7675e60
ethernet: fix some bugs in phy&mac driver
...
1. Original register mapping for LAN8720 has some registers that doesn't exist/support.
So just remove them, and fix the power and init function for LAN8720.
2. GPIO16 and GPIO17 is occupied by PSRAM, so only ETH_CLOCK_GPIO_IN mode is supported in that case if using PSRAM.
3. Fix bug of OTA failing with Ethernet
4. Fix bug of multicast with Ethernet
Closes https://github.com/espressif/esp-idf/issues/2564
Closes https://github.com/espressif/esp-idf/issues/2620
Closes https://github.com/espressif/esp-idf/issues/2657
2018-11-06 11:07:22 +08:00
Peter Meerwald-Stadler
6a197d305f
Fix some typos related to ethernet documentation and Kconfig. Closes https://github.com/espressif/esp-idf/pull/2642
2018-10-28 21:12:09 +01:00
morris
20b7f0ec87
ethernet: fix infinite loop when init phy or reset mac
...
1. fix infinite loop problem when init phy device
2. fix infinite loop problem when reset mac
3. fix little bugs in ethernetif_init
4. fix incompatible return value between lwip and esp-idf
Closes https://github.com/espressif/esp-idf/issues/2331
Closes https://github.com/espressif/esp-idf/issues/2141
2018-09-20 10:09:38 +08:00
morris
3063a62e3e
ethernet: fix some bugs in ethernet driver
...
1. create a new pbuf to squash linked pbuf
2. optimize emac driver by adding ESP_IRAM_ATTR
3. remove duplicated function declare in esp_eth.h
4. remove duplicated code in emac_setup_tx_desc
5. disable Promiscuous mode
2018-09-17 10:12:46 +08:00
morris
ec07112f5b
ethernet: support esp_eth_deinit
...
1. change static emac-dma memory to dynamic
2. add esp_eth_deinit
3. modify ethernet example
4. add testcase for ethernet deinit function
5. GPIO0 could not output the 50MHz clock to PHY, so remove this configuration
2018-08-28 12:18:48 +08:00
shangke
710e69feca
emac:add set_eth_mac api
2017-12-15 17:15:53 +08:00
Frank Sautter
f324458b6a
feat(emac): add support for emac to use internal (APLL) clock outputs.
2017-11-13 14:18:58 +08:00
Kedar Sovani
8348a71847
ethernet: remove CONFIG_ETHERNET
...
1. Hello World application shows no footprint difference before and
after this change
2. examples/ethernet/ethernet application compiles properly (can't
test with my board)
2017-08-18 08:31:43 +05:30
Angus Gratton
453b5ded1d
ethernet: Add convenience functions esp_eth_smi_wait_value() & esp_eth_smi_wait_set()
...
Covers the common case of waiting for a particular PHY register to have a particular value.
2017-04-20 18:03:00 +10:00
Angus Gratton
453722ba54
ethernet: Refactor PHY support to be part of ethernet component
...
Move generic PHY support into its own interface
2017-04-20 18:03:00 +10:00
shangke
e8b7670db3
ethernet: add doc
2017-02-11 16:42:16 +08:00
shangke
9893b71096
ethernet: add a gpio to enable/disable phy power
2017-02-11 15:19:53 +08:00
shangke
0e701e1cac
ethernet: support flow control
2017-01-10 15:19:18 +08:00
shangke
5ddf6daa98
feature/ethernet_driver: update ethernet driver
...
1. The transmitting mode of the packets from LWIP to MAC is changed from synchronous to asynchronous.
2. The receive buf mode : support pointer mode and copy mode.
3. Add get phy status func used to config mac register.
2016-12-26 14:50:49 +08:00
shangke
e0040af7e5
ethernet: add first version of ethernet driver
2016-12-01 19:17:48 +08:00
