- GCM operation in mbedtls used ECB, which calculated only 16 bytes of data each time.
- Therefore, when processing a large amount of data, it is necessary to frequently set hardware acceleration calculations,
- which could not make good use of the AES DMA function to improve efficiency.
- Hence, GCM implementation is replaced with CTR-based calculation which utilizes AES DMA to improve efficiency.
usb_host_transfer_submit_control() uses the incorrect bmRequestType direction
flag. Therefore, when doing a transfer check, all transfers were mistakenly
treated as OUT transfers (only affects transfer check and not actual transfer).
This commit fixes a race condtion bug with usb_dwc_hal_chan_request_halt()
where a channel the channel is halted if it has just completed a transfer
(i.e., finished processing a QTD with the "HOC" flag set) but the channel is
still pending interrupt handling. In this case...
- usb_dwc_hal_chan_request_halt() would simply read the channel's underlying
register, determine it is not active, not set the "halt_requested" flag, and
simply return true.
- The caller assumes of usb_dwc_hal_chan_request_halt() will assume that the
channel has halted, and may proceed to reconfigure the pipe/port
- When usb_dwc_hal_chan_decode_intr() comes to process the pending interrupt
it will simply return USB_DWC_HAL_CHAN_EVENT_CPLT not knowing a halt has been
requested.
This commit updates the implementation of usb_dwc_hal_chan_request_halt() so
that a halt is properly requested even if the underlying channel has already
physically halted.
Following the file renaming to use the "usb_dwc" prefix, this commit
updates the symbol names of those files to use the "usb_dwc" as well.
Some LL functions were also renamed so that the register name is
mentioned.
This commit updates the DWC_OTG based struct/ll/hal file names to
use the prefix "usb_dwc". This naming scheme reduces ambiguity if
another USB controller implementation is added.
As a result, "hcd.c" has been renamed to "hcd_dwc.c"
When SECURE BOOT V2 is enabled and CONFIG_SECURE_BOOT_SIGNED_BINARIES
is not set, sector-pad the bootloader image, which is required for an
external PKCS#11 interface to generate a signature.
when CONFIG_ESP_SYSTEM_PMP_IDRAM_SPLIT is not set, the PMP rule for esp32c2 shoud allow write access.
Fix esp_cpu_configure_region_protection() in cpu.c accordingly.
Set CONFIG_NEWLIB_TIME_SYSCALL_USE_HRT to enable to force CONFIG_ESP_TIME_FUNCS_USE_RTC_TIMER to disable
and hence prevent the following tests from being executed:
- Timestamp after abort is correct in case RTC & High-res timer have + big error
- Timestamp after restart is correct in case RTC & High-res timer have + big error
- Timestamp after restart is correct in case RTC & High-res timer have - big error
A part of the test 'Can allocate IRAM int only with an IRAM handler' was to
allocate an intr with the handler in RTC memory which is not supported by esp32c2.
A condition was added to prevent this part of the test to execute on esp32c2 targets.
This commit fixes an issue where in the ULP RISC-V I2C example causes
a spurious wakeup of the main CPU because of a Trap signal when the ULP
core does not meet the wakeup threshold values. This was due to the fact
that the RTC_CNTL_COCPU_DONE signal was being set before the
RTC_CNTL_COCPU_SHUT_RESET_EN signal which was causing the the ULP RISC-V
core to not reset properly on each cycle.
Closes https://github.com/espressif/esp-idf/issues/10301
