Added a note to specify that the memory for the response of a custom endpoint
should be allocated using the heap, as this memory gets freed by the protocomm layer
once it has been passed to the transport layer.
Closes https://github.com/espressif/esp-idf/issues/13263
This commit updates the sdkconfig for some examples when building with the
v10.5.1 kernel. The updates fixes the following:
Place FreeRTOS functions into flash
- Some examples use nearly 100% of available IRAM, thus any small increase in
IRAM in other components (e.g., FreeRTOS) will lead to a build error. As a
result, 'CONFIG_FREERTOS_PLACE_FUNCTIONS_INTO_FLASH' has been enabled in those
examples to save some IRAM.
- Some examples consume too much flash memory, leading to the 'factory'
parition overflowing. IN those examples,
'CONFIG_PARTITION_TABLE_SINGLE_APP_LARGE' has been enabled to use a larger
'factory' partition.
Application partition size was not correctly declared per secure
boot alignment requirements. This was causing build failure when
example was built with secure boot enabled.
By default, disabled the BLE Encrpyption requirement for provisioning characteristic.
With this flag enabled, when remote attempts to read and if the ACL link is not encrypted,
ESP device will return Insufficient Authentication. It is remote device responsibility to go
for link encryption which may result in pairing.
Some devices do not proceed for any pairing and just show failure pop-up. Also, user needs
to remove bonding on remote phone manually and then try again. This is causing bad user experience.
End user can enable it as per their use case.
1) Rename srp component to esp_srp
2) Remove dependency on hkdf sha
3) Restructure protocomm component APIs to make them more flexible for allowing multiple security versions
4) esp_srp: convert API return type from int to esp_err_t
5) esp_srp: Formatting changes
6) Added mbedtls_gcm instead of aes_ctr
Co-authored-by: Laukik hase <laukik.hase@espressif.com>
This updates the minimal supported version of CMake to 3.16, which in turn enables us to use more CMake features and have a cleaner build system.
This is the version that provides most new features and also the one we use in our latest docker image for CI.
If the user copies the BLE example to their own project without understanding the need to enable the BT stack or BTDM BLE settings in the SDK then their build will probably fail at this line due to linker errors.
Closes https://github.com/espressif/esp-idf/pull/6652
Closes IDFGH-4854
