Commit Graph

342 Commits

Author SHA1 Message Date
morris
3176ba11d8 gdma: update DMA soc data for esp32-s3 2021-07-16 14:47:09 +08:00
morris
217d3eb690 Merge branch 'feature/adc_single_sample_support_on_s3' into 'master'
adc: support adc single read on s3

Closes IDF-3118

See merge request espressif/esp-idf!14036
2021-07-16 06:32:08 +00:00
laokaiyao
27d9657b6c driver/adc: support adc single sample on s3 2021-07-15 19:13:50 +08:00
Michael (XIAO Xufeng)
ded74889da Merge branch 'bugfix/spi_slave_wrong_miso_mosi' into 'master'
spi_slave: Fix MOSI/MISO inconsistent references on the SPI Slave drivers.

See merge request espressif/esp-idf!13645
2021-07-15 08:51:41 +00:00
Armando
6bb6f3ebc4 adc: refactor esp32s3 adc_ll.h 2021-07-15 10:33:03 +08:00
Li Shuai
d2aeb9e4ce light sleep: add gpio configure workaround at slept status for esp32s3 2021-07-14 21:57:21 +08:00
Marius Vikhammer
71c1da8952 timer group: add timer group and WDT support for ESP32S3
Regenerate timer group header files and update LL, check examples
and update docs.
2021-07-06 16:21:43 +08:00
morris
d9d4db43a1 Merge branch 'feature/dedic_gpio_esp32s3' into 'master'
Dedicated gpio driver on esp32s3

Closes IDF-3387

See merge request espressif/esp-idf!14196
2021-07-06 03:20:04 +00:00
Michael (XIAO Xufeng)
5986b204c6 Merge branch 'feature/i2c_add_static_buffer_transfers' into 'master'
i2c: add `i2c_cmd_link_create_static()` to create commands from a given buffer

Closes IDFGH-3087

See merge request espressif/esp-idf!13013
2021-07-02 14:00:03 +00:00
Michael (XIAO Xufeng)
e8ff60544d Merge branch 'bugfix/channel_clk_independent' into 'master'
rmt: clean up and support esp32-s3 (no DMA support)

Closes IDF-3296 and IDFGH-5350

See merge request espressif/esp-idf!13244
2021-07-01 04:37:07 +00:00
morris
c8c3015018 dedic_gpio: support on esp32s3 2021-06-30 18:10:54 +08:00
Gustavo Henrique Nihei
4bc9e18124 spi: Ensure DMA In-Link EOF is generated by trans_done on SPI Slave 2021-06-28 18:58:59 -03:00
Gustavo Henrique Nihei
fb8d9f76b3 spi: Remove Slave TX/RX set bitlen not effective for ESP32-S2/C3/S3
Furthermore, RX_EOF_EN should only be set when SPI Slave is configured
for segment transfer mode and the "ms_data_bitlen" field is configured
to control the "IN_SUC_EOF" interrupt. Since "ms_data_bitlen" is not
set anymore for S2, C3 and S3, "RX_EOF_EN" should be cleared.
2021-06-28 18:58:59 -03:00
bizhuangyang
78c67d2384 gpio:support gpio in/out/interrupt for esp32s3(728)
Add support of gpio for esp32s3(728). Adjust some pins and comments in test_gpio.c. Add support for gpio functions for gpio19 and gpio20. Update S3 programming guide Peripheral API: gpio and sigmadelta. Add unit test for input and output function of S3 USB pins(GPIO19 and GPIO20) and C3 USB pins(GPIO18 and GPIO19). Adjust input only test in test_spi_master.c.
2021-06-28 11:44:14 +08:00
morris
40f350693f rmt: update soc data with regtool for esp32s3 2021-06-22 15:29:11 +08:00
morris
a1494809b2 rmt: clean up LL driver 2021-06-22 15:29:11 +08:00
morris
9afdf54748 hal: added HAL_ASSERT 2021-06-22 11:28:01 +08:00
Cao Sen Miao
f2fe0847d5 usb_serial_jtag: add initial support for S3 (including flashing, monitoring, writing, and reading) but console is not avaliable now 2021-06-18 12:42:41 +08:00
Cao Sen Miao
11672dc9e5 soc: update the csv headers for esp32s3 2021-06-16 18:04:18 +08:00
Michael (XIAO Xufeng)
1322a44588 Merge branch 'feature/mcpwm_refactor_and_support_esp32s3' into 'master'
MCPWM: refactor driver and support ESP32-S3

Closes IDF-1765

See merge request espressif/esp-idf!11907
2021-06-09 16:45:20 +00:00
Omar Chebib
cfcbca1271 i2c: optimize space allocated for read or write buffers
Only a single command will be allocated now when a read or write is
prepared in the command list. The size of a command's buffer is not
limited to 255 bytes anymore.
2021-06-09 15:21:20 +08:00
Angus Gratton
bc4eb2071c Merge branch 'feature/toolchain_2021r1' into 'master'
Bring 2021r1 toolchains

Closes IDFGH-5009

See merge request espressif/esp-idf!13554
2021-06-09 05:06:23 +00:00
morris
d4fe219c49 mcpwm: refactor driver 2021-06-09 12:27:01 +08:00
Michael (XIAO Xufeng)
afe9b42cbf Merge branch 'typo_fix/fix_typo_in_comment_in_uart_ll' into 'master'
Fix typo in `include/hal/uart_ll.h`

Closes IDFGH-5320

See merge request espressif/esp-idf!13826
2021-06-09 02:13:36 +00:00
Michael (XIAO Xufeng)
e005ec0899 Merge branch 'feature/s3_base_support' into 'master'
soc: S3 base support

See merge request espressif/esp-idf!13827
2021-06-07 12:07:08 +00:00
Anton Maklakov
5a982ffe7a hal: fix ee.get_gpio_in command for esp32-s3 2021-06-07 12:52:50 +07:00
Marius Vikhammer
19a492bc8d soc: add base support for ESP32-S3
Updates the following with changes from verification branches:

 * esp_rom linker files
 * rtc_cntl and system reg and struct headers

Also updates:
 * GDMA driver with new register layout
 * esptool submodule commit
2021-06-07 10:40:14 +08:00
Michael (XIAO Xufeng)
1596e336a1 Merge branch 'bugfix/spi_flash_cs_setup' into 'master'
spi_flash: fix cs line setup to make the flash driver more stable

Closes IDF-3240

See merge request espressif/esp-idf!13623
2021-06-04 07:05:05 +00:00
Andrey Starodubtsev
8488055711 Fix typo in include/hal/uart_ll.h
s/final state machine/finite-state machine/g

Signed-off-by: bizhuangyang <bizhuangyang@espressif.com>

Merges https://github.com/espressif/esp-idf/pull/7076
2021-06-02 15:37:30 +08:00
Cao Sen Miao
08f1bbe0c7 spi_flash: fix cs line setup to make the flash driver more stable 2021-06-01 16:41:41 +08:00
Gustavo Henrique Nihei
c1b3d77dcf spi: Fix wrong target register for interrupt disable 2021-05-31 11:25:32 -03:00
Michael (XIAO Xufeng)
8409485b22 Merge branch 'doc/fix_misleading_of_mcpwm_capture_enable_doc' into 'master'
driver/mcpwm: fix the misleading of mcpwm_capture_enable parameters

Closes IDFGH-3000

See merge request espressif/esp-idf!13497
2021-05-16 15:15:26 +00:00
laokaiyao
e66f25caf2 driver/mcpwm: fix the misleading of mcpwm_capture_enable parameters
closes https://github.com/espressif/esp-idf/issues/5032
2021-05-13 12:23:19 +08:00
morris
e10202a608 lcd: add esp_lcd component
* Support intel 8080 LCD panel IO on ESP32-S3
* Support RGB LCD panel on ESP32-S3
* Support SPI && I2C LCD panel IO on all esp chips
2021-05-12 17:53:32 +08:00
Michael (XIAO Xufeng)
758238a8a1 Merge branch 'bugfix/separate_gdma_tx_rx_interrupt' into 'master'
gdma: separate tx/rx channel interrupt

Closes IDF-3181

See merge request espressif/esp-idf!13367
2021-05-06 16:38:44 +00:00
Alex Lisitsyn
ea6710ce98 soc/hal: add tinyusb support esp32s3
add usb hal/soc, usb_ll files and esp32s3 target for usb
move usb_hal.h into soc common folder
soc/hal: fix soc and periph for usb
tinyusb: fix tinyusb io header
hal: usb_ll fix pull up/down config for esp32s3
soc/hal: fix peripheral addresses
2021-05-06 16:20:54 +08:00
morris
6e981af406 gdma: separate tx/rx channel interrupt 2021-05-06 15:06:37 +08:00
Michael (XIAO Xufeng)
41937a9f97 Merge branch 'feature/support_spi_on_727' into 'master'
spi: support spi on 727

Closes IDF-3178

See merge request espressif/esp-idf!13346
2021-04-28 08:16:15 +00:00
Ivan Grokhotkov
9d34a1cd42 Merge branch 'bugfix/optimise_esp_timer_get_time' into 'master'
systimer: optimise esp_timer_get_time

See merge request espressif/esp-idf!13335
2021-04-27 08:52:09 +00:00
Armando
831b6127d7 spi: update interrupt set in spi_ll.h 2021-04-27 11:11:00 +08:00
morris
988c88a6b1 systimer: optimise esp_timer_get_time 2021-04-26 11:54:02 +08:00
Cao Sen Miao
0d81edb174 spi_flash: refactoring flash encryption into new api 2021-04-25 17:09:25 +08:00
Ivan Grokhotkov
ea7d020f20 Merge branch 'feature/ubsan' into 'master'
system: add option to enable undefined behavior sanitizer (UBSAN)

Closes IDF-166 and IDF-1824

See merge request espressif/esp-idf!11318
2021-04-23 09:27:42 +00:00
Angus Gratton
0be81903cc Merge branch 'bugfix/hal_duplicated_interrupt_functions' into 'master'
[hal]: merged duplicated HAL layer functions

Closes IDF-2308

See merge request espressif/esp-idf!12444
2021-04-23 07:47:51 +00:00
Ivan Grokhotkov
e449728b7d hal: fix planted break instruction for Xtensa targets
On Xtensa, "break 0, 0" encodes a software breakpoint which is placed
into the program by the debug monitor. Planted breakpoints (added in
the code to trap into debugger) should be encoded as "break 1, 15".
See table "Breakpoint Instruction Operand Conventions" in the ISA
Reference manual.
2021-04-22 23:33:47 +02:00
Ivan Grokhotkov
da90775d98 hal: mpu: fix signed overflow error 2021-04-22 23:33:47 +02:00
morris
ec898b771e systimer: strip hal driver 2021-04-22 21:08:39 +08:00
Michael (XIAO Xufeng)
7e06a60c0d Merge branch 'refactor/no_dac_on_esp32s3' into 'master'
dac: added DAC support macro

Closes IDF-1777

See merge request espressif/esp-idf!13038
2021-04-12 10:52:33 +00:00
Michael (XIAO Xufeng)
8cfcf6da7a Merge branch 'bugfix/enable_gpio18_gpio19_esp32c3' into 'master'
gpio: Disable USB JTAG when setting pins 18 and 19 as GPIOs on ESP32C3

Closes IDF-2964

See merge request espressif/esp-idf!12753
2021-04-12 09:39:55 +00:00
morris
75dfd970b4 dac: added DAC support macro
Remove DAC support on ESP32-S3
2021-04-12 12:04:46 +08:00
Michael (XIAO Xufeng)
57af5acefe Merge branch 'ci/enable_all_test_for_i2c_on_c3' into 'master'
I2C: enable all unit test for i2c on esp32c3

Closes IDF-2494

See merge request espressif/esp-idf!12474
2021-04-08 12:31:51 +00:00
Michael (XIAO Xufeng)
925dacd7fb Merge branch 'bugfix/remove_HSPI_macro_on_c3' into 'master'
spi: remove HSPI macros on esp32c3 and esp32s3

Closes IDF-2535

See merge request espressif/esp-idf!12637
2021-04-08 09:33:18 +00:00
Omar Chebib
cd79f3907d gpio: Disable USB JTAG when setting pins 18 and 19 as GPIOs on ESP32C3
When `DIS_USB_JTAG` eFuse is NOT burned (`False`), it is not possible
to set pins 18 and 19 as GPIOs. This commit solves this by manually
disabling USB JTAG when using pins 18 or 19.
The functions shall use `gpio_hal_iomux_func_sel` instead of
`PIN_FUNC_SELELECT`.
2021-04-08 14:01:18 +08:00
Cao Sen Miao
c3da21a93f I2C: enable all unit test for i2c on esp32c3 2021-04-06 17:37:55 +08:00
Armando
9b9ea71ff9 spi: remove HSPI macro on esp32c3 and esp32s3 2021-04-06 13:42:49 +08:00
Jakob Hasse
b23c9142d5 [hal]: cleaned up interrupt mask functions
* Functions for setting and clearing interrupts
  as well as function to read interrupt mask
  should be clearer now.
* Using hal layer interrupt set and clear
  functions in esp_wifi component
2021-04-06 11:54:13 +08:00
aleks
193f1f9b4e driver: fix uart handler in iram calls inline uart_ll_is_tx_idle 2021-03-31 14:39:59 +00:00
Darian Leung
2f58060921 TWAI: FIFO overrun handling and errata workarounds
This commit adds handling for FIFO overruns and
adds workarounds for HW errats on the ESP32.

Closes https://github.com/espressif/esp-idf/issues/2519
Closes https://github.com/espressif/esp-idf/issues/4276
2021-03-30 14:17:31 +08:00
Angus Gratton
fa2946d651 Merge branch 'feature/support_esp32s3_beta_3' into 'master'
Support ESP32S3 beta 3 target

Closes IDF-2908

See merge request espressif/esp-idf!12661
2021-03-23 10:17:58 +00:00
Michael (XIAO Xufeng)
67ba80f2ec Merge branch 'bugfix/reduce_the_consumption_of_touch_sensor_during_deep_sleep' into 'master'
fix: reduce the consumption of touch sensor during deep sleep

See merge request espressif/esp-idf!12248
2021-03-22 07:10:44 +00:00
Angus Gratton
54edd4fc58 Merge branch 'feature/wdt_c3' into 'master'
wdt: Fix RTC_SLOW_CLK for chips, corrects WDT timeout.

Closes IDF-2118 and IDF-2332

See merge request espressif/esp-idf!12796
2021-03-22 06:48:58 +00:00
KonstantinKondrashov
aa1338bf23 wdt: Fix timeout and RTC_SLOW_CLK
RTC_SLOW_CLK
ESP32:    150kHz
ESP32-S2:  90kHz
ESP32-S3: 150kHz
ESP32-C3: 150kHz
2021-03-19 00:15:18 +08:00
Marius Vikhammer
2aead8ba57 Support ESP32S3 Beta 3 target
Update ROM API. Port changes from bringup branch.
2021-03-18 10:24:22 +08:00
morris
5a520cacf1 timer_group: correct timer_ll_set_divider 2021-03-16 17:56:37 +08:00
fuzhibo
6b361ed70f fix: reduce the consumption of touch sensor during deep sleep 2021-03-15 03:59:54 +00:00
morris
d0be56b8fe lcd: add LL driver for esp32-s3 2021-03-13 22:31:30 +08:00
Angus Gratton
fd164b82b6 Merge branch 'refactor/move_from_xtensa' into 'master'
Movements from xtensa

Closes IDF-2164

See merge request espressif/esp-idf!10556
2021-03-11 00:24:25 +00:00
Michael (XIAO Xufeng)
fc61e60948 uart: fixed incorrect baudrate on C3 and S3 when target is too slow
The integer part of the divider is only 12-bit now. We used prescaler to get low frequency instead.
2021-03-09 20:09:42 +08:00
Cao Sen Miao
0b7caf96a9 spi_flash:modify nvs reading writing issue on esp32s3 2021-03-03 22:02:32 +08:00
Renz Bagaporo
1efdcd69d9 xtensa: move out trax 2021-02-26 19:45:48 +08:00
Cao Sen Miao
a8343bc470 esp_system: support gpio wakeup from deep sleep on esp32c3 2021-02-26 12:26:49 +08:00
morris
7b37158ede rmt: distinguish group and channel in HAL layer 2021-02-25 12:42:23 +08:00
morris
6dc7f95342 mcpwm: fix wrong meta information 2021-02-22 20:23:35 +08:00
Marius Vikhammer
245a2469f6 sha: dont enable/disable GDMA when enable/disable SHA module
Enabling and disabling of the GDMA module is done by the GDMA driver.
2021-02-02 19:24:57 +08:00
Michael (XIAO Xufeng)
c99e891201 Merge branch 'feature/sync_adc_changes_from_c3_to_master_last' into 'master'
adc: sync adc changes from c3 to master (last time)

Closes IDF-2694

See merge request espressif/esp-idf!12134
2021-01-26 12:52:20 +08:00
Michael (XIAO Xufeng)
3d7da2c8ff adc: simplify LL on C3 2021-01-25 15:08:55 +08:00
Cao Sen Miao
9905da46e0 spi_flash: Add auto suspend mode on esp32c3 2021-01-25 11:14:02 +08:00
Michael (XIAO Xufeng)
06f22fc4b0 Merge branch 'feature/new_restart_mode_driver_and_ut_for_spi_slave_hd' into 'master'
spi_slave_halfduplex: append mode driver

See merge request espressif/esp-idf!10845
2021-01-24 09:27:12 +08:00
Armando
0538dc2d93 spi_slave_hd: add DMA Append Mode feature 2021-01-21 18:53:53 +08:00
Li Shuai
a43de3a44b fix set UART_FORCE_XOFF can't stop new Tx request issue 2021-01-19 14:51:22 +08:00
Li Shuai
355dd10257 light sleep: dfs support for esp32c3 2021-01-19 14:50:58 +08:00
ninh
659d805411 esp_wifi: light sleep optimization 2021-01-18 15:31:03 +08:00
Angus Gratton
19883d9799 Merge branch 'bugfix/fix_sign_conversion_warnign' into 'master'
freertos: Silence sign-conversion warning

Closes IDFGH-3949

See merge request espressif/esp-idf!10724
2021-01-15 14:40:59 +08:00
Marius Vikhammer
0713e93b8f TWAI: bringup for S3 and C3 2021-01-14 20:30:31 +08:00
Michael (XIAO Xufeng)
2d3f22918f Merge branch 'feature/gdma_channel_allocator' into 'master'
gdma channel allocator

Closes IDF-2124

See merge request espressif/esp-idf!11570
2021-01-14 10:52:49 +08:00
Renz Bagaporo
ff2d9fd96c [freertos] Silence sign-conversion warning 2021-01-14 10:54:15 +11:00
Angus Gratton
f683db7aea Merge branch 'feature/c3_IDF-2554' into 'master'
global: Uses CCOUNT API instead of XTHAL macro

Closes IDF-2554

See merge request espressif/esp-idf!11954
2021-01-13 12:55:21 +08:00
morris
e6d23a35ec gdma: dynamic alloc DMA channels 2021-01-13 10:52:27 +08:00
KonstantinKondrashov
dada7cd035 global: Uses CCOUNT API instead of XTHAL macro 2021-01-12 16:24:23 +08:00
morris
753a929525 global: fix sign-compare warnings 2021-01-12 14:05:08 +08:00
Michael (XIAO Xufeng)
caf1e9d570 Merge branch 'bugfix/soc_caps_implicit_inc' into 'master'
HAL: explicitly include soc_caps.h

Closes IDFGH-4547

See merge request espressif/esp-idf!11895
2021-01-11 14:18:10 +08:00
Marius Vikhammer
58c3f6a421 hal: explicitly include soc_caps.h
Many files in the HAL layer depended on SOC_ macros without
explicitly including soc_caps.h
2021-01-07 10:13:17 +08:00
morris
1f9629da9f hal: put cpu_ll_get_core_id to IRAM 2021-01-05 15:39:46 +08:00
morris
9e7d2c0065 esp32c3: format and clean up interrupt and os port code 2021-01-05 15:39:46 +08:00
Felipe Neves
5d316ac142 interrupt: added INTC FLEXIBLE capabillity to esp32c3 CPU caps 2021-01-05 15:39:46 +08:00
Felipe Neves
09bc1580be intr_allocator: add abstractions for priority, type and edge-ack interrupt controller functions 2021-01-05 15:39:46 +08:00
Angus Gratton
f09b8ae7a4 driver: Add esp32c3 ADC driver
Based on internal commit 3ef01301fffa552d4be6d81bc9d199c223224305
2020-12-23 09:53:24 +11:00
Michael (XIAO Xufeng)
40b08e33c9 Merge branch 'bugfix/touch_sensor_reading_error_in_light_sleep_process' into 'master'
driver(touch): fix touch sensor false trigger in sleep mode

See merge request espressif/esp-idf!10983
2020-12-14 14:51:51 +08:00
fuzhibo
985e94139d driver(touch): fix touch sensor false trigger in sleep mode 2020-12-10 17:43:14 +08:00
Marius Vikhammer
457ce080ae AES: refactor and add HAL layer
Refactor the AES driver and add HAL, LL and caps.

Add better support for running AES-GCM fully in hardware.
2020-12-10 09:04:47 +00:00
Michael (XIAO Xufeng)
04d6b115ae adc: fixed efuse called in critical section issue 2020-12-08 17:41:49 +08:00
Armando
f80bcb733a uart: modify s3 ll functions of reading/writing fifo 2020-11-30 15:23:15 +11:00
Angus Gratton
7c08be5771 hal: Add initial ESP32-C3 support
From internal commit 7761d6e8
2020-11-30 15:23:15 +11:00
Armando
05a4a8d864 uart: seperate sclk and baudrate setting 2020-11-24 19:12:52 +08:00
Armando
fb8b905539 uart: add uart support on esp32s3 2020-11-24 19:12:51 +08:00
Michael (XIAO Xufeng)
caf83b88ba Merge branch 'feature/bringup_i2c_for_s3' into 'master'
I2C:  Add support for esp32s3 and add source clock allocator

Closes IDF-2011

See merge request espressif/esp-idf!10923
2020-11-12 22:12:58 +08:00
Cao Sen Miao
6eee601cf6 i2c: Add supports on esp32s3 2020-11-12 11:32:45 +08:00
morris
deea402cf4 timer: pooling update bit before reading count value 2020-11-12 10:31:38 +08:00
Angus Gratton
66fb5a29bb Whitespace: Automated whitespace fixes (large commit)
Apply the pre-commit hook whitespace fixes to all files in the repo.

(Line endings, blank lines at end of file, trailing whitespace)
2020-11-11 07:36:35 +00:00
Angus Gratton
3882c2b8ed Merge branch 'feature/bringup_esp32s3_fpga_update_rmt_driver' into 'master'
rmt: support esp32s3

Closes IDF-1773

See merge request espressif/esp-idf!10292
2020-11-07 07:15:53 +08:00
Michael (XIAO Xufeng)
d7ce8a537f Merge branch 'feature/bringup_esp32s3_fpga_rtc_sleep' into 'master'
feature (rtc): update rtc related code(rtc_sleep rtc_init) to support esp32s3

See merge request espressif/esp-idf!10404
2020-11-05 19:19:36 +08:00
morris
ff976867b3 rmt: split TX and RX in LL driver
Split TX and RX function in LL driver.
Channel number is encoded in driver layer.
Added channel signal list in periph.c
2020-11-05 19:00:55 +08:00
chenjianqiang
9465af0066 rmt: support esp32s3 2020-11-05 19:00:55 +08:00
fuzhibo
93c7cf094e rtc: update rtc related code(rtc_sleep rtc_init) to support esp32s3 2020-11-04 02:43:41 +00:00
morris
e4c8ec6174 timergroup: move interrupt index into peripheral description file
1. Added timer_group_periph.c file, describing module global signals
   (e.g. interrupt index)
2. Added more caps in soc_caps.h
2020-11-03 18:16:50 +08:00
Michael (XIAO Xufeng)
35faecea1d Merge branch 'feature/support_sigma_delta_on_s3' into 'master'
sigma_delta: add periph signal list and support esp32-s3

See merge request espressif/esp-idf!10945
2020-10-30 17:22:02 +08:00
Michael (XIAO Xufeng)
8337f0afa2 spi_flash: fix LL of esp32s3 and add 32-bit support 2020-10-29 18:21:42 +08:00
morris
17808b3ff8 sigma_delta: add periph signal list and support esp32-s3 2020-10-29 11:06:28 +08:00
morris
d084ef4473 gdma: fix wrong m2m mode wrong config 2020-10-27 16:53:19 +08:00
Michael (XIAO Xufeng)
9a394e1aa0 Merge branch 'feature/spi_bringup_esp32s3' into 'master'
spi: bringup on esp32s3

See merge request espressif/esp-idf!10107
2020-10-27 00:51:42 +08:00
Michael (XIAO Xufeng)
bcb5c3506d Merge branch 'feature/dedicated_gpio' into 'master'
Dedicated GPIO driver on ESP32-S2 and ESP32-S3

Closes IDF-1672

See merge request espressif/esp-idf!8716
2020-10-26 15:33:33 +08:00
Armando
f7e91ef6c1 spi: esp32s3 bringup for spi 2020-10-26 11:28:34 +08:00
Renz Bagaporo
e7460c1f00 soc: remove unecessary headers in dport_access.h 2020-10-22 19:42:34 +08:00
morris
bb1369b922 dedicated gpio: add driver 2020-10-20 21:06:09 +08:00
morris
74d78148bc pcnt: add pcnt peripheral signal connections
pcnt: fix bug in clear interrupt status
2020-10-19 11:56:18 +08:00
Michael (XIAO Xufeng)
647dea9395 soc: combine xxx_caps.h into one soc_caps.h
During HAL layer refactoring and new chip bringup, we have several
caps.h for each part, to reduce the conflicts to minimum. But this is
The capabilities headers will be relataive stable once completely
written (maybe after the featues are supported by drivers).

Now ESP32 and ESP32-S2 drivers are relative stable, making it a good
time to combine all these caps.h into one soc_caps.h

This cleanup also move HAL config and pin config into separated files,
to make the responsibilities of these headers more clear. This is
helpful for the stabilities of soc_caps.h because we want to make it
public some day.
2020-10-17 16:10:15 +08:00
fuzhibo
6773df88f2 feature(rtc): rename i2c_xxx to regi2c_xxx 2020-10-14 21:15:24 +08:00
Marius Vikhammer
949fb8e63a SHA: add HAL layer and refactor driver
Add a LL and HAL layer for SHA.
2020-10-09 08:24:08 +00:00
Michael (XIAO Xufeng)
fe37db3271 esp_flash: fix the incorrect check_idle logic in LL and chip_driver 2020-10-02 05:34:36 +00:00
Angus Gratton
83a7891f84 Merge branch 'feature/intr_alloc' into 'master'
feature/intr_alloc: moved interrupt allocator to the esp-system and refactored it moving all platform specific code to its place

Closes IDF-1913

See merge request espressif/esp-idf!10267
2020-09-30 07:44:12 +08:00
Felipe Neves
2e826b7a8f intr_alloc: split interrupt allocator into common-code and platform-code
esp_system: removed repeated interrupt allocator code and moved common code to esp_system

xtens: moved xtensa specific code from freertos to the xtensa component

hal/interrupt_controller: added interrupt controller hal and ll files

docs: update the doxyfile with new location of esp_itr_alloc.h file

xtensa: fixed dangerous relocation problem after moving xtensa interrupt files out of freertos

docs: removed Xtensa reference from intr_allocator api-reference

xtensa: pushed the interrupt function that manages non iram interrupts to the xtensa layer

esp_system/test: fixed platform dependent setting for intr_allocator tests

hal: rename the functions used to manage non iram interrupt mask.
2020-09-30 07:44:12 +08:00
Marius Vikhammer
4d57a5c2c7 gdma: fix incorrect calculation of tx fifo size 2020-09-25 16:15:56 +08:00
Armando
1e1beb69aa spi: fix build fail issue when target is esp32s3 2020-09-24 10:51:23 +08:00
Marius Vikhammer
bff0016eb8 crypto accelerator support on esp32s3
SHA: passing unit tests
RSA: pass tests
AES: tests passing
2020-09-22 15:15:03 +08:00
morris
cc66334014 esp_timer: initial support on esp32-s3 2020-09-22 15:15:03 +08:00
morris
75a372a9f0 unit_test: support reference clock, test delay function 2020-09-22 15:15:03 +08:00
morris
61f89b97c6 bringup esp32-s3 on FPGA 2020-09-22 15:15:03 +08:00
Wielebny666
db6fbba73e spi_master: correctly set cs polarity
All devices must be added to the same spi line before use.

Partly solve this problem: https://github.com/espressif/esp-idf/pull/5490
2020-09-17 12:05:57 +00:00
morris
a3cc43485f async memcpy: support async memcopy on esp32s2/s3
Added async memory copy API:
on esp32-s2, the implementation is based on CP_DMA
on esp32-s3, the implementation is based on GDMA
2020-09-16 21:30:54 +08:00
Marius Vikhammer
b2f390df01 hal: update link to HAL readme.md
The HAL readme was moved during refactoring, but links were not updated.
2020-09-11 15:48:08 +08:00
Michael (XIAO Xufeng)
ea63bd3de4 Merge branch 'feat/extract_hal_from_soc' into 'master'
hal: extract hal component from soc component

See merge request espressif/esp-idf!9992
2020-09-01 23:56:15 +08:00
Michael (XIAO Xufeng)
5425ef4ee4 hal: extract hal component from soc component 2020-09-01 13:25:32 +08:00