Lou Tianhao
2abfeb19c8
Power Management: change the IO hold interface for esp32c6
2023-07-11 12:04:20 +08:00
Mahavir Jain
0bf93134f4
Merge branch 'feature/anti_dpa_configuration_c6_h2_v5.1' into 'release/v5.1'
...
esp32c6/esp32h2: crypto: add support for DPA protection configuration (v5.1)
See merge request espressif/esp-idf!24128
2023-06-30 23:50:44 +08:00
Mahavir Jain
1764a0bd28
crypto: add support for DPA protection configuration in C6/H2
...
- Technical details covered in section "15.3.2 Anti-DPA Attack Security
Control" chapter of the ESP32-C6 TRM
- Default configuration sets the security level low for the DPA
protection
- This change applies to all the crypto peripherals where the clock
frequency is dynamically adjusted to create randomness in the power
consumption trajectory
- This configuration helps to make the SCA attacks difficult on the
crypto peripherals
2023-06-08 20:37:03 +05:30
wuzhenghui
123da6baa7
bugfix: fix esp32c6eco1 fosc calibration cycles during sleep
2023-05-04 11:47:54 +08:00
liuning
14ca81f03f
rtc_sleep: workaround systimer stall issue during lightsleep on ESP32C3
2023-03-15 20:33:03 +08:00
Song Ruo Jing
1a66459b44
usb_serial_jtag: Improve the code for the issue of usb cdc device unable to work during sleep
...
1. Remove RTC_CLOCK_BBPLL_POWER_ON_WITH_USB Kconfig option
During sleep, BBPLL clock always gets disabled
esp_restart does not disable BBPLL clock, so that first stage bootloader log can be printed
2. Add a new Kconfig option PM_NO_AUTO_LS_ON_USJ_CONNECTED
When this option is selected, IDF will constantly monitor USB CDC port connection status.
As long as it gets connected to a HOST, automatic light-sleep will not happen.
Closes https://github.com/espressif/esp-idf/issues/8507
2023-02-27 12:10:49 +08:00
Armando
c56eb8646b
g0: resolve MMU_PAGE_SIZE not defined in g0 build issue
2023-02-22 12:37:40 +08:00
Wu Zheng Hui
04987ac201
Merge branch 'feature/add_ram_loadable_app_support' into 'master'
...
feature: add ram loadable app support
See merge request espressif/esp-idf!19465
2023-02-02 10:28:13 +08:00
wuzhenghui
44df5b31af
feature: add ram loadable app support
2023-02-01 17:57:22 +08:00
Li Shuai
68594abe05
sleep: light sleep supported for esp32c6
2023-01-31 22:12:58 +08:00
KonstantinKondrashov
185262c283
esp_hw_support(esp32): If the MAC_FACTORY CRC check fails, then esp_efuse_mac_get_default returns INVALID_CRC instead of abort
...
Closes https://github.com/espressif/esp-idf/issues/10401
2022-12-29 05:23:18 +08:00
Marius Vikhammer
4ddbaa4166
linux target: add support for building esp_hw_support, soc and hal components for linux target
2022-12-09 13:59:39 +08:00
morris
fb26d0e11f
etm: added etm channel allocator
2022-11-23 15:31:33 +08:00
KonstantinKondrashov
244cf14ea8
esp_hw_support: Adds APIs to define user own MAC addresses without generation from the base MAC address
...
Closes https://github.com/espressif/esp-idf/pull/7261
Closes https://github.com/espressif/esp-idf/issues/9531
2022-11-16 19:23:10 +08:00
KonstantinKondrashov
1f9260d790
all: Apply new version logic (major * 100 + minor)
2022-11-03 08:36:23 +00:00
wuzhenghui
23e37393a7
esp32c6: add esp_hw_support
2022-09-26 20:32:13 +08:00
Michael (XIAO Xufeng)
a0bf87ee5d
usb_serial_jtag: fixed the docs that we can use usj in sleep modes
...
Related to: https://github.com/espressif/esp-idf/issues/8507 , https://github.com/espressif/esp-idf/issues/8884
2022-09-22 01:36:06 +08:00
jingli
ee3423834e
kconfig: refactor xtal freq kconfig to common configuration item
2022-08-05 19:12:29 +08:00
Jing Li
66395a5c00
system/sleep: further fix spi flash/ram current leakage
2022-07-21 19:14:26 +08:00
morris
7fd9a91034
dma: move from driver to hw_support
2022-06-28 14:17:12 +08:00
Cao Sen Miao
6589daabb9
MMU: Add configurable mmu page size support on ESP32C2
2022-06-08 19:34:31 +08:00
Marius Vikhammer
0687daf2c8
kconfig: move remaining kconfig options out of target component
...
The kconfig options are moved to the component where they are used,
mostly esp_hw_support and esp_system.
2022-05-23 17:57:45 +08:00
Marius Vikhammer
c7a827a136
kconfig: update check_kconfigs.py to handle orsource command
...
check_kconfigs.py would only correctly handle "source", but not "rsource", "osource"
or "orsource".
Fixed any warnings detected after updating the test.
2022-05-06 11:31:24 +08:00
Marius Vikhammer
d2872095f9
soc: moved kconfig options out of the target component.
...
Moved the following kconfig options out of the target component:
* CONFIG_ESP*_DEFAULT_CPU_FREQ* -> esp_system
* ESP*_REV_MIN -> esp_hw_support
* ESP*_TIME_SYSCALL -> newlib
* ESP*_RTC_* -> esp_hw_support
Where applicable these target specific konfig names were merged into
a single common config, e.g;
CONFIG_ESP*_DEFAULT_CPU_FREQ -> CONFIG_ESP_DEFAULT_CPU_FREQ_MHZ
2022-04-21 12:09:43 +08:00
morris
29e9b5b46a
hw_support: move periph_ctrl from driver to hw_support
2022-03-29 11:53:31 +08:00
Cao Sen Miao
17ea9d7faf
USB_SERIAL_JTAG: Fix the issue that there is no rom log when restarting
2021-11-29 20:26:09 +08:00
Li Shuai
a939f7d34b
light sleep: add software workaround for esp32s3 gpio reset issue
2021-10-20 11:36:22 +08:00
Li Shuai
c5b481c6da
light sleep: fix Flash leakage when its CS pin has no hardware pullup
2021-09-15 20:34:18 +08:00
Li Shuai
af4f2075ac
light sleep: fix SPIRAM leakage when its CS pin has no hardware pullup
2021-09-15 20:34:18 +08:00
Li Shuai
a82f33c9b5
fix rtc register read error and add workaround for rtc bus isolate issue
2021-08-10 12:01:29 +08:00
Renz Bagaporo
586023790e
esp_system: move sleep modes to esp_hw_support, power down light sleep to esp_pm
2021-04-07 17:53:37 +08:00
Renz Bagaporo
9478298aa4
esp32: move mac target specific configs
2021-03-31 19:17:33 +08:00
Marius Vikhammer
c85d949c1f
ci: run Example_GENERIC for C3
...
Add support for running example_GENERIC tests for C3 on label.
Fix examples that fail.
2021-03-15 10:27:07 +08:00
Renz Bagaporo
349f0cad3e
esp_common: other movements
2021-02-24 12:16:37 +08:00
Renz Bagaporo
ae15c81dbe
esp_common: move to esp_hw_support
2021-02-24 12:16:37 +08:00
