Commit Graph

34472 Commits

Author SHA1 Message Date
Jakub Kocka
8a6fe49314 fix: Fixed KConfig files that were not succesfully checked 2024-02-07 15:09:35 +01:00
Jakub Kocka
80be245982 docs(kconfig): Updated config name lenght 2024-02-07 13:31:50 +01:00
gongyantao
72a8b4e6e8 fix(bt/bluedroid): fix dangling pointer issue when logging remove section 2024-02-07 14:57:28 +08:00
InfiniteYuan
ecedff9884 ble_mesh: example: fix the structure init order to meet C++ requirements
Closes https://github.com/espressif/esp-idf/issues/8110
2024-02-07 10:09:20 +08:00
InfiniteYuan
b2dcd46063 ble_mesh: stack: fix the structure init order to meet C++ requirements 2024-02-07 10:09:20 +08:00
morris
cc649ea869 Merge branch 'contrib/github_pr_12998_v5.2' into 'release/v5.2'
fix(twai): TWAI_GENERAL_CONFIG_DEFAULT initialize controller_id (GitHub PR) (v5.2)

See merge request espressif/esp-idf!28572
2024-02-06 21:30:26 +08:00
Omar Chebib
e10cbd108b fix(bootloader): add legacy retained memory CRC calculation
* Closes https://github.com/espressif/esp-idf/issues/12849

In former versions of ESP-IDF, the user custom memory data in the retained memory
was taken into account during the CRC calculation. This was changed in a later
commit, the custom memory was ignored, therefore this can seen as a breaking change.
This commit gives the possibility to choose between the former (legacy) or
new way of calculating the CRC.
2024-02-06 16:15:24 +08:00
Sudeep Mohanty
b8139a609b fix(ulp_riscv): Updated RTC I2C to use open-drain IOs
This commit updates the RTC I2C driver in the ULP RISC-V to initialize
all I2C IOs in open-drain mode.
2024-02-06 08:41:55 +01:00
InfiniteYuan
af72c4b94f ble_mesh: update ble mesh ble adv type 2024-02-06 14:14:57 +08:00
morris
5c30cc24fd fix(rgb_lcd): relax the check for the data line GPIO
There are a bunch of cases you might want some pins not exposed.

Eg.

  * Reading say 8 bit data and outputting the top 5 bits, discarding the rest by not mapping those data pins to output pins

 * Not using hsync/vsync because sync data is embedded within the data bits for more timing flexibility (eg. interlacing).

 * Using the LCD module as a high speed parallel data output bus, with no need for sync/control pins.

Removing this validation makes these cases work.

Merges https://github.com/espressif/esp-idf/pull/13103
2024-02-06 10:31:33 +08:00
zhiweijian
c924e0cfe4 feat(ble/controller): Add API to get BLE controller status on ESP32 2024-02-05 16:02:07 +08:00
zhiweijian
68d2915377 Fixed xQueueSemaphoreTask assert when deinit host during scan 2024-02-05 16:01:29 +08:00
nilesh.kale
7d358754a2 feat(mbedtls): updated mbedtls version from 3.5.0 to 3.5.2
This updates the submodule mbedtls to its latest version 3.5.2.
2024-02-05 12:50:27 +05:30
chenjianhua
024bccbc58 feat(bt/bluedroid): Support get status of bluedroid host 2024-02-04 16:30:15 +08:00
chenjianhua
fc8d80dfab fix(bt/example): Fixed UART HCI when flow control is off on ESP32C3 2024-02-04 16:30:04 +08:00
chenjianhua
7af929f825 feat(bt/bluedroid): Make the max number of bond device to be configurable 2024-02-04 16:28:57 +08:00
zhanghaipeng
d0e94733f0 fix(ble/controller): Fixed tx count in direct test mode on ESP32-C3 and ESP32-S3
- Fixed tx count in direct test mode on ESP32-C3 and ESP32-S3
- fixed modem sleep enter failed sometimes
2024-02-04 14:43:05 +08:00
chenjianhua
861318b138 fix(bt): Update bt lib for ESP32-C3 and ESP32-S3(91980c2)
- Fixed scheduling when modem sleep wakeup delayed
- Fixed IRQ FIFO overflow when enter critical
- Fixed clock sync timeout for modem sleep
- Fixed directed adv with RPA when privacy disabled
- Fixed instant passed for connection update and PHY update
2024-02-04 14:42:57 +08:00
Marius Vikhammer
e0355cd6a8 docs(build): add cannonical stable url to all docs 2024-02-02 10:36:19 +08:00
morris
d4db16058d fix(mcpwm): reset GPIO used by generator after delete
Closes https://github.com/espressif/esp-idf/issues/12980
2024-02-01 17:47:55 +08:00
Brian Whitman
ab8ab03537 fix(rgb_lcd): don't assume 16 bit width on panels for restart logic
Merges https://github.com/espressif/esp-idf/pull/13020
2024-01-31 18:52:27 +08:00
laokaiyao
03fb722ca5 fix(hal_utils): add division range check in integral algorithm 2024-01-31 12:06:43 +08:00
morris
5ad9e6b87f feat(rmt): added a help function for allocating encoder memory
The encoder memory location should respect the RMT_MEM_ALLOC_CAPS,
which is affected by some Kconfig options, like ISR_IRAM_SAFE

Closes https://github.com/espressif/esp-idf/issues/13032
2024-01-30 17:03:41 +08:00
xiongweichao
0a0aaa23e0 fix(ble): Fixed macro definition error for 136K clock drift 2024-01-30 15:37:59 +08:00
xiongweichao
028f174467 fix(ble): Fixed Bluetooth not waking up due to clock drift 2024-01-30 15:37:44 +08:00
Wu Meng Shi
ed4bf92b8e fix(ble_mesh): Reject node reset when provisioning link is active 2024-01-30 10:44:13 +08:00
Sudeep Mohanty
a05e40bfe3 fix(lp_i2c): Fixed an issue where the LP_I2C IO lines were not in open-drain mode
This commit fixes an issue where in the LP I2C IO lines were not
initialized in open-drain mode.

Closes https://github.com/espressif/esp-idf/issues/12969
2024-01-29 09:48:16 +01:00
igor.udot
dc0f41f7be ci: change known_failure_cases workflow 2024-01-29 15:36:33 +08:00
zhiweijian
49eab1da5c fix(esp_phy): Fixed BLE TX 2M problem causing by phy_wifi_enable_set()
1. Fixed BLE 2M phy TX problem causing by phy_wifi_enable_set() on ESP32-C3 and ESP32-S3
2. Fixed BLE CCA bug on ESP32-C2
3. Fixed wifi boot bug at low temp on ESP32-C6
4. Fixed BLE and WIFI could not receive packets after entering light sleep for a long time on ESP32-C3, ESP32-S3, ESP32-C2 and ESP32-C6
2024-01-29 14:08:46 +08:00
Harshit Malpani
9e472f582b
fix: fix esp_http_client_example build failure
Fixed the build failure of esp_http_client_example for ESP32-C6 when
build with Wi-Fi enabled
2024-01-29 11:35:59 +05:30
Mahavir Jain
e173895618 fix(soc): change debug addr range to CPU subsystem range
For C6/H2/P4/C5, there is no SoC specific debug range. Instead the same
address range is part of CPU Subsystem range which contains debug mode
specific code and interrupt config registers (CLINT, PLIC etc.).

For now the PMP entry is provided with RWX permission for both machine
and user mode but we can save this entry and allow the access to only
machine mode for this range.

For P4/C5 case, this PMP entry can have RW permission as the debug mode
specific code is not present in this memory range.
2024-01-29 13:57:04 +08:00
Harshit Malpani
302661ed5f
fix(esp_http_client): Fix http digest auth without qop
Closes https://github.com/espressif/esp-idf/issues/12962
2024-01-29 11:00:58 +05:30
Gabor Kiss-Vamosi
7598f31cdd fix misformatted link 2024-01-29 13:14:54 +08:00
Kapil Gupta
d900eed440 fix(wifi): Add support to move supplicant BSS to external memory 2024-01-27 10:40:54 +05:30
Erhan Kurubas
054f33b386 feat(coredump): improve the probability of accessing healthy TCBs 2024-01-26 22:55:16 +08:00
laokaiyao
66d7410051 fix(i2s): fixed incorrect reg base name on C3
Closes https://github.com/espressif/esp-idf/issues/12643
2024-01-26 18:44:38 +08:00
Jan Beran
f90e5e04e0 feat: Use python-reorder-imports instead of isort 2024-01-26 09:51:55 +01:00
zhanghaipeng
cc254d8ff3 feat(bt/bluedroid): Support ext adv aux option 2024-01-26 16:21:27 +08:00
zhanghaipeng
62b84e3169 fix(bt/bluedroid): Fix BLE malloc internal wrapper fail 2024-01-26 16:21:27 +08:00
Zeke Gustafson
29e1ca5ddd feat(ble/bluedroid): Add getter for BLE GAP callback 2024-01-26 16:21:27 +08:00
Zeke Gustafson
5ed6abc5e2 feat(ble/bluedroid): Add getter for BLE GATTS callback 2024-01-26 16:21:27 +08:00
zhanghaipeng
9b2e0a2a01 feat(ble/bluedroid): Add getter for BLE GATTC calllback 2024-01-26 16:21:27 +08:00
zhanghaipeng
217ed6c1bf docs(ble/bluedroid): Optimize documentation for BLE duplicate scan 2024-01-26 16:21:27 +08:00
zhanghaipeng
48abf362c0 fix(ble/bluedroid): Fix dangling pointer issue in deletion of bonded devices 2024-01-26 16:21:27 +08:00
zhanghaipeng
14bb24c3ab fix(ble/bluedroid): Fix BLE background connection log level 2024-01-26 16:21:27 +08:00
morris
4ecc978bd6 Merge branch 'fix/i2s_multi_dev_test_fix_v5.2' into 'release/v5.2'
fix(i2s): multi_dev test update to use non_boot_ctrl gpio (v5.2)

See merge request espressif/esp-idf!28701
2024-01-26 16:12:51 +08:00
hongshuqing
9373d53ce7 feat(pmu): set fix voltage to different mode for esp32h2
h2 remove include
2024-01-26 11:36:57 +08:00
KonstantinKondrashov
64b1bd6cb2 feat(efuse): Adds new efuses for esp32c6 2024-01-26 11:36:57 +08:00
KonstantinKondrashov
bc6072c754 feat(efuse): Adds new efuse for esp32h2 2024-01-26 11:36:56 +08:00
zwl
fdcd6783d7 Update ble lib to eb473dda on ESP32-C6 and ESP32-H2 2024-01-25 20:38:49 +08:00