morris
c0dcebc41c
Merge branch 'feat/esp32s3_support_gpio_deepsleep_wakeup_v4.4' into 'release/v4.4'
...
example/deep_sleep: add example of EXT0 and using internal pullups (v4.4)
See merge request espressif/esp-idf!18119
2022-06-01 19:56:17 +08:00
Jiang Jiang Jian
fc30369909
Merge branch 'bugfix/update_efuse_name_v4.4' into 'release/v4.4'
...
efuse: update efuse name (backport v4.4)
See merge request espressif/esp-idf!18195
2022-05-30 11:15:16 +08:00
Wu Zheng Hui
2e4784611d
efuse: update efuse name (backport v4.4)
2022-05-30 11:15:16 +08:00
morris
0340c2f2bc
Merge branch 'bugfix/keep_rtc8m_in_lightsleep_v4.4' into 'release/v4.4'
...
pm: fixed RTC8M domain power down issue when used as RTC source (v4.4)
See merge request espressif/esp-idf!18075
2022-05-30 09:54:39 +08:00
laokaiyao
9b0f7b657b
i2s: fixed write timeout while setting the clock (v4.4)
2022-05-24 10:14:44 +08:00
chaijie
d222adbeeb
solve memory error bug when in lightsleep mode
2022-05-18 17:43:13 +08:00
Michael (XIAO Xufeng)
4efab0d0ff
soc/esp32s3: merge gpio caps into soc_caps.h
2022-05-16 22:01:11 +08:00
Michael (XIAO Xufeng)
e119d6cb06
pm: add powerdown for int_8m on ESP32-H2
...
Also move the xtal fpu logic to sleep_modes.c
2022-05-16 00:59:36 +08:00
Michael (XIAO Xufeng)
17b9cc6b4a
pm: fixed RTC8M domain power issues
...
introduced in e44ead5356
1. The int8M power domain config by default is PD. While LEDC is using
RTC8M as clock source, this power domain will be kept on.
But when 8MD256 is used as RTC clock source, the power domain should
also be kept on.
On ESP32, there was protection for it, but broken by commit
e44ead5356
. Currently the power domain
will be forced on when LEDC is using RTC8M as clock source &&
!int8m_pd_en (user enable ESP_PDP_DOMAIN_RTC8M in lightsleep). Otherwise
the power domain will be powered off, regardless of RTC clock source.
In other words, int8M domain will be forced off (even when 8MD256
used as RTC clock source) if LEDC not using RTC8M as clock source, user
doesn't enable ESP_PDP_DOMAIN_RTC8M, or in deep sleep.
On later chips, there's no such protection, so 8MD256 could't be used as
RTC clock source in sleep modes.
This commit adds protection of 8MD256 clock to other chips. Fixes the
incorrect protection logic overriding on ESP32. Now the power domain
will be determiend by the logic below (order by priority):
1. When RTC clock source uses 8MD256, power up
2. When LEDC uses RTC8M clock source, power up
3. In deepsleep, power down
4. Otherwise determined by user config of ESP_PDP_DOMAIN_RTC8M,
power down by default. (This is preferred to have highest
priority, but it's kept as is because of current code structure.)
2. Before, after the macro `RTC_SLEEP_CONFIG_DEFAULT` decides dbias, the
protection above may force the int8m PU. This may cause the inconsistent
of dbias and the int8m PU status.
This commit lifts the logic of pd int8m/xtal fpu logic to upper layer
(sleep_modes.c).
Related: https://github.com/espressif/esp-idf/issues/8007 , https://github.com/espressif/esp-idf/pull/8089
temp
2022-05-12 15:57:09 +08:00
morris
3e7448d0f3
i80_lcd: support I2S1 LCD mode for esp32
2022-04-19 13:01:13 +00:00
Jiang Jiang Jian
f0e894e540
Merge branch 'bugfix/remove_c_series_chips_unsupported_efuse_field_backport_v4.4' into 'release/v4.4'
...
efuse: free esp32c3/esp32h2 unused efuse field (backport v4.4)
See merge request espressif/esp-idf!17292
2022-03-02 18:36:13 +08:00
morris
5f56bbd2d0
Merge branch 'bugfix/rtcio_increase_size_v4.4' into 'release/v4.4'
...
sleep: fixed ext1 cannot wakeup via RTCIO >= 18 issue (v4.4)
See merge request espressif/esp-idf!17201
2022-03-02 16:53:05 +08:00
songruojing
2ef6b8845b
uart: fixed reset logic on ESP32-S3
2022-03-02 02:42:46 +08:00
songruojing
bdd7610e66
uart: fixed incorrect channel number on ESP32S2, S3 and C3
2022-03-02 02:42:06 +08:00
wuzhenghui
c6aa1cf732
remove esp32c3 unsupported efuse field
2022-02-28 17:26:28 +08:00
Michael (XIAO Xufeng)
21b80a969f
soc: updated soc_caps about rtc_io and the format
2022-02-18 11:44:43 +08:00
Jiang Jiang Jian
f9927119b8
Merge branch 'bugfix/efuse_timesettings_for_esp32s3_v4.4' into 'release/v4.4'
...
efuse: Fixes eFuse timesettings issue on esp32S3 (v4.4)
See merge request espressif/esp-idf!17177
2022-02-17 04:00:14 +00:00
Jiang Jiang Jian
174bd31bc0
Merge branch 'bugfix/usb_no_rom_log_v4.4' into 'release/v4.4'
...
USB_SERIAL_JTAG: Fix the issue that there is no rom log when restarting(backport v4.4)
See merge request espressif/esp-idf!17073
2022-02-17 03:59:36 +00:00
KonstantinKondrashov
5c7b597594
efuse: Fixes eFuse timesettings issue on esp32S3
2022-02-16 15:15:27 +08:00
songruojing
41e452e7d8
gpio: Fix the bug that gpio interrupt cannot be triggered on app cpu on ESP32S3
...
Closes https://github.com/espressif/esp-idf/issues/7885
(cherry picked from commit 91f1159f9c
)
2022-02-16 14:50:51 +08:00
Cao Sen Miao
a74e06560b
USB_SERIAL_JTAG: Fix the issue that there is no rom log when restarting
2022-02-15 18:56:06 +08:00
Michael (XIAO Xufeng)
c2c4b126f7
Merge branch 'feature/support_new_psram_v4.4' into 'release/v4.4'
...
psram: add ESP32-D0WD-R2-V3 support(backport v4.4)
See merge request espressif/esp-idf!16705
2022-02-13 14:13:38 +00:00
Michael (XIAO Xufeng)
730ca0ea43
Merge branch 'bugfix/cpu_reset_perip_clk_disable_v4.4' into 'release/v4.4'
...
esp_system: change range comparsion for reset reason to specifc cpu reset reason comparison (backport v4.4)
See merge request espressif/esp-idf!15898
2022-02-10 10:32:09 +00:00
Michael (XIAO Xufeng)
8b86834a72
Merge branch 'bugfix/gpio_pin_num_fix_v4.4' into 'release/v4.4'
...
gpio: Fix some gpio pin num errors on esp32s2 and esp32c3 (backport v4.4)
See merge request espressif/esp-idf!16594
2022-02-10 10:21:52 +00:00
morris
956c6b889f
rmt: do not support rx wrap on esp32s2
...
Closes https://github.com/espressif/esp-idf/issues/8354
2022-02-09 17:29:09 +08:00
songruojing
b80a070395
esp_system: replace the range comparsion for reset reason in perip clk init with specific reset reason check, also add a test case in LEDC to check for the perip clk not being disabled after cpu reset
...
(cherry picked from commit f57456e9dd919e5eea1d3cd0caa64b5c97a4df73)
2022-01-27 09:51:00 +00:00
Martin Vychodil
7d9652dccf
System/Security: Memprot API unified (ESP32C3,ESP32S3)
...
Unified Memory protection API for all PMS-aware chips
Closes JIRA IDF-3849
2022-01-27 12:40:27 +08:00
Roland Dobai
a59e3ab59d
Merge branch 'feature/esp32s3_apptrace_v4.4' into 'release/v4.4'
...
Feature/esp32s3 apptrace v4.4
See merge request espressif/esp-idf!16649
2022-01-26 09:58:35 +00:00
KonstantinKondrashov
1638b36804
efuse: Fixes eFuse timesettings issue on esp32c3
2022-01-25 19:14:31 +08:00
laokaiyao
816b0ce878
i2s: impove the apll and clock division calculation
2022-01-13 11:06:40 +08:00
Cao Sen Miao
e2ef65e117
psram: add ESP32-D0WD-R2-V3 support
2022-01-10 10:39:00 +08:00
Alexey Gerenkov
8c2990fcea
trax: Adds ESP32-S3 support
2022-01-05 19:34:28 +01:00
songruojing
b25fb1111d
gpio: Fix some gpio pin num errors on esp32s2 and esp32c3
2021-12-30 12:27:14 +08:00
Armando
1ec46ad3b8
adc: support adc dma driver on all chips
2021-12-23 17:13:46 +08:00
Armando
2aed35b804
adc: fix adc1 channel 8 and 9 not defined bug on s3
2021-12-14 20:10:47 +08:00
weitianhua
1383785aa1
Remove dummy defines of Classic BT
2021-10-29 14:21:26 +08:00
weitianhua
f4aad85f8b
Make Classic BT related document links only visible for ESP32
2021-10-29 14:21:12 +08:00
Li Shuai
e8188e5d8f
ci: replacing old header with new SPDX header style
2021-10-20 11:36:23 +08:00
Li Shuai
881e1b0fd5
deep sleep: add deep sleep support for esp32s3
2021-10-20 11:36:20 +08:00
alex.li
26d8b7ee17
Add HW external coexist api.
...
Simplify the external coex flow.
And replace gpio of driver interface with hal one.
2021-10-12 14:05:14 +08:00
Kevin (Lao Kaiyao)
a9faafee3c
Merge branch 'feature/touch_sensor_driver_support_for_esp32s3' into 'master'
...
driver(touch): support touch sensor for esp32s3 platform
Closes IDF-1784 and IDF-3302
See merge request espressif/esp-idf!14102
2021-10-12 05:50:58 +00:00
laokaiyao
f4705f8eb4
touch sensor: update copyright notice
2021-10-08 11:45:57 +08:00
laokaiyao
a1cadba191
touch_sensor: apply general check
2021-10-08 11:32:12 +08:00
fuzhibo
589646a31e
update touch with review advice
2021-10-08 10:39:46 +08:00
fuzhibo
057b9d61b5
driver(touch): support touch sensor for esp32s3 platform
2021-10-08 10:39:46 +08:00
morris
e09e39c94f
lcd: unify callback prototype
2021-10-02 14:23:31 +08:00
Jiang Jiang Jian
f5ae8b0533
Merge branch 'feature/ledc_use_rtc8m_or_xtal_lightsleep' into 'master'
...
support RTC8M and XTAL power domain in light sleep mode
Closes IDF-3419
See merge request espressif/esp-idf!15152
2021-09-27 04:02:29 +00:00
SalimTerryLi
bd89dcc683
RMT: add loop_autostop driver support for esp32s3
2021-09-24 15:24:45 +08:00
morris
20ef511d0a
Merge branch 'bugfix/fix_reg_name_charactor_err' into 'master'
...
bugfix: fix reg name character error
See merge request espressif/esp-idf!14169
2021-09-18 07:10:57 +00:00
Jiang Jiang Jian
3b48b7e663
Merge branch 'Fix/update_reset_reason' into 'master'
...
update reset reason for c3/s3/h2
See merge request espressif/esp-idf!14747
2021-09-18 07:03:50 +00:00