Commit Graph

739 Commits

Author SHA1 Message Date
Ivan Grokhotkov
cce9fa970e ulp: add documentation for JUMPS instruction conditions
Hardware implements conditions LE, LT, GE, and conditions EQ and GT
are implemented in the assembler by emitting two JUMPS instructions
with other conditions.
2018-08-13 23:23:55 +03:00
Ivan Grokhotkov
c2e424e7af ulp: fix calculation or ulp_run argument
The argument to ulp_run should be expressed in 32-bit words. Both the
address of ulp_entry and RTC_SLOW_MEM already are uint32_t*, so their
difference is the difference in addresses divided by sizeof(uint32_t).
Therefore the extra division by sizeof(uint32_t) is not needed.
2018-08-13 23:23:54 +03:00
Ivan Grokhotkov
a0191b28b2 docs: fix line endings of ULP docs 2018-08-13 23:23:29 +03:00
Angus Gratton
92b29923cb docs: Move version-related includes to run in sphinx-build not make
Means they show up on ReadTheDocs(!)
2018-08-13 16:01:20 +10:00
Angus Gratton
70f15bd28e docs: Combine the common en/zh_CN Makefiles to one common file 2018-08-10 00:28:13 +00:00
Michael (XIAO Xufeng)
607a1abefd docs: translate the version include script to Chinese 2018-08-10 00:28:13 +00:00
Angus Gratton
cd31a5e3c6 docs: Add version-specific include files, version documentation
* "git clone" command and a small version header are generated
  depending on git properties.
* Add Versions page with details about each version
* Make it clear using master branch is living on the "bleeding
  edge"
2018-08-10 00:28:13 +00:00
Jitin George
fbe792f33f esp_https_ota: Add support for HTTPS based ota feature 2018-08-08 14:55:22 +05:30
Jiang Jiang Jian
c209efa4e2 Merge branch 'doc/wifi_update_channel_state_information_document_v3.1' into 'release/v3.1'
docs: update channel state information document (backport v3.1)

See merge request idf/esp-idf!2796
2018-08-01 14:49:45 +08:00
Ivan Grokhotkov
d360f6d95d sleep: fix flushing UARTs when entering deep sleep
Since 94250e42a0, UART output is suspended when entering sleep mode
(deep or light sleep). This makes sense for light sleep, where sleep
normally takes small amount of time, and flushing the UART would add
a lot of latency. But this breaks existing behaviour for deep sleep,
where UART output was previously sent out before entering sleep mode.

Closes https://github.com/espressif/esp-idf/issues/2145
2018-07-19 10:21:23 +03:00
XiaXiaotian
f4c57eb764 docs: update channel state information document
1. Move channel to the first row of the table.

    2. Remove the condition of HT20/HT40 for they are determined by
    secondary channel.

    3. Clean up the CSI table.
2018-07-17 15:01:12 +08:00
Angus Gratton
0a2e4967ef doc: Clarify some Eclipse setup steps 2018-07-02 11:42:29 +10:00
Angus Gratton
cbc5ef4bc6 Merge branch 'docs/eclipse_regex' into 'master'
Docs: Fix bugs in Eclipse setup in CN

See merge request idf/esp-idf!2620
2018-07-02 11:41:12 +10:00
Ivan Grokhotkov
b17defd6cb docs: conf.py: check return code when calling os.system
Several calls were made but results were not checked, obfuscating the
errors.
2018-06-25 13:43:43 +08:00
Angus Gratton
d0b8f2865f docs: Switch base URL from esp-idf.readthedocs.io to docs.espressif.com 2018-06-19 11:23:33 +00:00
Angus Gratton
86148a740b Merge branch 'feature/fatfs_without_wl' into 'master'
FATFS support without wear levelling

See merge request idf/esp-idf!2526
2018-06-18 12:26:02 +08:00
Sagar Bijwe
fd7b794e81 FATFS support without wear levelling
This change allows readonly FATFS to be mounted without wear levelling
support. This will provide the customers a simple way to mount FATFS images
generated on host and flashed onto the chip during factory provisioning.
Since NVS encryption is not supported yet and NVS entry size is limited,
the change will provide an easy alternative for securing the provisioning data
by just marking FATFS parition as encrypted.
2018-06-16 16:02:35 +08:00
Michael (XIAO Xufeng)
9377575415 docs(spi_master): fix wavedrom image and comment mistake 2018-06-15 17:38:27 +08:00
Ivan Grokhotkov
efd16673bc docs: add pages about error handling 2018-06-15 15:53:23 +08:00
Ivan Grokhotkov
d9f8311b9d docs: add error codes reference 2018-06-15 15:49:24 +08:00
Ivan Grokhotkov
5e0a3d99e8 Kconfig: split out compiler options, add them to reference 2018-06-15 15:49:23 +08:00
Ivan Grokhotkov
b1b1257476 docs/ulp: fix instruction fetch and execution times 2018-06-14 19:42:31 +08:00
Angus Gratton
59ab2136e8 Merge branch 'doc/kconfig_item' into 'master'
doc: fix the level inconsistent issue in Kconfig document

See merge request idf/esp-idf!2460
2018-06-14 12:51:50 +08:00
Ivan Grokhotkov
70eed4c284 Merge branch 'docs/update_eclipse-setup' into 'master'
Docs/update_eclipse-setup

See merge request idf/esp-idf!2528
2018-06-11 23:20:24 +08:00
Angus Gratton
84f78110dd Merge branch 'feature/esp_timer_example' into 'master'
examples: add esp_timer example

See merge request idf/esp-idf!2494
2018-06-11 11:44:45 +08:00
Ivan Grokhotkov
03d78e7afb Merge branch 'feature/Add_noinit_rtc_noinit_sections' into 'master'
esp32: Add .noinit and .rtc_noinit sections to the linker script

See merge request idf/esp-idf!1996
2018-06-08 16:01:30 +08:00
Angus Gratton
bcd4fb9944 Merge branch 'doc/jtag_startup_command_fix' into 'master'
docs/jtag: use 'flushregs' instead of 'x $a1=0' in gdbinit

See merge request idf/esp-idf!2520
2018-06-08 15:15:29 +08:00
Ivan Grokhotkov
f47af6185d docs/jtag: use ‘flushregs’ instead of ‘x $a1=0” in gdbinit
The old command caused was incorrect (x is “examine”, not “execute”)
and caused GDB register update only by chance. This replaces it with
“flushregs” command which purpose is exactly that — force GDB to
fetch registers from the remote.
2018-06-08 11:45:46 +08:00
Jin Fang Cheng Cheng
f9a3368f28 Update eclipse-setup.rst 2018-06-08 11:00:29 +08:00
Angus Gratton
c8d3c6a494 Merge branch 'feature/monitor_filter_output' into 'master'
idf_monitor: add support for filtering options

See merge request idf/esp-idf!2486
2018-06-08 08:09:40 +08:00
Ivan Grokhotkov
ab538bb9f3 Merge branch 'feat/spi_master_timing' into 'master'
feature(spi_master): fine tune the timing of spi master

See merge request idf/esp-idf!2301
2018-06-07 20:19:06 +08:00
Ivan Grokhotkov
2f5cd89833 examples: add esp_timer example 2018-06-07 11:59:36 +08:00
Angus Gratton
d7d559a489 Merge branch 'doc/api-guides_blufi' into 'master'
Doc/api guides blufi

See merge request idf/esp-idf!2376
2018-06-07 08:54:27 +08:00
Angus Gratton
70c6f8a803 Merge branch 'bugfix/few_typos_in_docs' into 'master'
Fix few typos in documentation

See merge request idf/esp-idf!2519
2018-06-07 08:24:23 +08:00
krzychb
713141e631 Replaced ASCII art drawings with blockdiag drawings 2018-06-06 23:27:05 +02:00
Mahavir Jain
6e48e52478 docs: fix flash_encryption key generation command
Signed-off-by: Mahavir Jain <mahavir@espressif.com>
2018-06-06 18:21:00 +05:30
michael
5cf7d3768d feat(spi_master): fine tune the timing of SPI 2018-06-06 06:08:39 +00:00
Jin Fang Cheng Cheng
b889305c1b Update blufi.rst 2018-06-06 12:11:57 +08:00
Jin Fang Cheng Cheng
4a25f18f21 Update blufi.rst 2018-06-06 12:05:27 +08:00
Jin Fang Cheng Cheng
ad48c2689f Update blufi.rst 2018-06-06 11:58:46 +08:00
Jin Fang Cheng Cheng
3a15efd3c3 Delete api-guides_blufi.png 2018-06-06 11:46:13 +08:00
michael
3ba8461928 doc: fix the level inconsistent issue in Kconfig document 2018-06-05 10:36:18 +00:00
Roland Dobai
51e42d8e92 idf_monitor: add support for filtering options 2018-06-05 12:23:27 +02:00
Angus Gratton
b2ff235bd0 Merge branch 'bugfix/github_prs' into 'master'
Merge some small fixes from Github

See merge request idf/esp-idf!2500
2018-06-05 11:51:35 +08:00
Angus Gratton
a8504b9628 docs: eclipse: Reword sentence, copy to Windows Eclipse guide also
Ref https://github.com/espressif/esp-idf/pull/1990
2018-06-05 09:53:59 +10:00
Jiang Jiang Jian
8a4c9d7dfb Merge branch 'doc/wifi_channel_state_information' into 'master'
add document of channel state information

See merge request idf/esp-idf!2468
2018-06-04 17:59:05 +08:00
wushifu32
736e10749f correct eclipse build command
Merges https://github.com/espressif/esp-idf/pull/2024
2018-06-04 17:19:28 +10:00
Wenderson Oliveira
2a6c35c9af Update eclipse-setup.rst
This is workaround for eclipse indexer problems. When I disable that option, my problems with eclipse and header files are gone.

Merges https://github.com/espressif/esp-idf/pull/1990
2018-06-04 16:47:03 +10:00
Jin Fang Cheng Cheng
27d1a5d51e Update index.rst 2018-06-04 14:24:40 +08:00
Jin Fang Cheng Cheng
bf29c7ca57 Update index.rst 2018-06-04 14:24:10 +08:00