Commit Graph

20 Commits

Author SHA1 Message Date
ronghulin
adfa43a3a4 feature: support tx amsdu 2021-01-15 20:10:18 +08:00
Chen Jian Xing
5b44295cb9 esp_wifi: fix esp32c3 code issues
1. enable wifi clk and rm dport header
2.syn phy_init_data.h from esp32
2021-01-10 16:16:28 +08:00
liu zhifu
fa9a5c0be5 esp_wifi: optimize WiFi TX performance 2020-08-13 12:26:21 +08:00
ChenJianxing
9e45c3c7d8 esp_wifi: remove wifi tx buffer limits 2020-05-27 15:06:53 +08:00
Nachiket Kukade
107cf56e20 esp_wifi: Enable WPA3 & PMF by default
In wifi station example, set PMF(Protected Management Frames)
configuration to capable. Set WPA3 Feature in menuconfig enabled
by default. This will allow device to establish more secured
connection with AP's that support these protocols.
2020-05-04 16:02:14 +05:30
ronghulin
ffd8c26780 feature: support multiple PHY init data 2020-03-05 16:14:00 +08:00
Angus Gratton
eb85cfb9f6 docs: Temporarily mark RF calibration chapter as ESP32 only
Can be re-enabled once ESP32-S2 calibration support is added
2020-02-07 16:37:45 +11:00
baohongde
a2398f0dcc components/esp_wifi: improve coexistence performance according to specific WiFi/BT/BLE scienario
1. Improve WiFi throughput in some Classic BT scienarios(idle, inquire scan,
       connected, sniff, a2dp pause, etc).

    2. Support WiFi + Classic BT + BLE mesh coexistence scienario.

    3. Improve WiFi scan and connect succeed ratio in coexistence scienario.

    4. Do not support to choose software coexistence preference anymore for it is
       determined according to coexistence scienario automatically.

components/lwip: increase TCP send buffer and receive window limitation when TCP window scale is enabled

components/ble_mesh: Fix some bugs about ble mesh

    1. fix send acl pkt after ble have sent terminate ind modify min adv interval to 10ms.
2020-01-10 16:00:12 +08:00
Nachiket Kukade
f2e37c4ca8 wpa_supplicant: Support WPA3 4-way handshake, add config option
1. Add changes in 4-way handshake path to allow SAE key mgmt.
2. Support for configuring WAP3 at init time, added Kconfig option.
3. Handle and propagate error conditions properly.
4. Link changes from WiFi library.
2019-11-26 10:59:55 +05:30
xiehang
b7334b0366 esp_wifi: Turn off wifi iram optimization by default, when using both Bluetooth and psram 2019-11-14 15:20:53 +08:00
xiehang
5e7f43f3d1 esp_wifi: Put some rx code to iram 2019-11-13 11:44:23 +00:00
Ivan Grokhotkov
5830f529d8 Merge branch 'master' into feature/esp32s2beta_merge 2019-10-02 19:01:39 +02:00
Roland Dobai
833822c10b Fix Kconfig issues discovered by upstream Kconfiglib 2019-09-23 16:10:57 +02:00
Angus Gratton
24d26fccde Merge branch 'master' into feature/esp32s2beta_update 2019-08-08 13:44:24 +10:00
Xia Xiaotian
99ef587a05 run WiFi on ESP32SBETA 2019-06-28 11:34:49 +08:00
liu zhifu
5d855fcdef esp_wifi: add limitation for setting maximum WiFi TX power
Limit the WiFi TX power range to 10dBm ~ 20.5 dBm
2019-06-27 17:28:59 +08:00
liu zhifu
d1e7d04f9b esp_wifi/lwip: support TCP window scale
Support enable/disable TCP Window scale feature via menuconfig
2019-06-04 14:09:04 +08:00
Roland Dobai
0ae53691ba Rename Kconfig options (components/esp32) 2019-05-21 09:09:01 +02:00
Roland Dobai
b8111ab1d5 Rename Kconfig options (components/esp_wifi) 2019-05-21 09:09:01 +02:00
suda-morris
958c2792e3 move WiFi-specific Kconfig to esp-wifi component
1. separate Kconfig from esp32 component
2. modify component.mk for esp_wifi a little bit to make it depend on IDF_TARGET
2019-04-11 12:33:15 +08:00