Commit Graph

19 Commits

Author SHA1 Message Date
baohongde
30779731ea components/bt: backport release/v3.3
Fix A2DP stuck when BLE's interval is too small
Bugfix that bluetooth controller may not be able to enter sleep after end of wake up request
Fix LMP sniff req timeout
2020-01-16 15:47:31 +08:00
baohongde
285925a43b components:bt: backports release/v3.3 0903
Remove xtensa/xruntime.h
Fix sending Lmp_feature_req_ext in a loop
Fix 2 bugs in r_ld_fm_sket_isr
fix data loss and send same pkt twice sometimes
fix adv data error in air sometimes
fix adv start/stop crash sometimes
Fix connect fail with some speakers
clear BT/BLE interruots after controller disable
add sco_data_path to be set in sdkconfig and do not reset the value upon HCI reset command
2019-09-23 18:02:28 +08:00
baohongde
e87d05d81f components/bt: Add precautions for esp_vhci_host_send_packet 2019-01-31 11:47:58 +08:00
wangmengyang
59f34461d7 component/bt: bugfix of bluetooth modem sleep not being able to work with Dynamic Frequency Scaling
1. start an esp_timer on entering sleep to acquire pm_lock before wake up from modem sleep
2. decrease the clock division of XTAL fed to bluetooth low power clock from 32us to 2us period to allow to work under 240MHz Max CPU frequency
3. decrease the minimum sleep duration threshold to allow shorter bluetooth modem sleep period, especially for BLE with short connection interval
4. reconfigure bluetooth baseband(BT-BB) settings after PHY/RF init upon waking up from modem sleep to avoid packet RX/TX performance degradation
2018-12-11 16:49:01 +08:00
zhiweijian
9103a04793 component/bt: add adv packet duplicate in scan duplicate 2018-09-11 02:31:11 +00:00
Hrishikesh Dhayagude
739b4aadf7 components/bt: Make a pass through Bluetooth header files
This is just a quick glance at all the header files exposed to the
users from cleanup point of view.

Signed-off-by: Hrishikesh Dhayagude <hrishi@espressif.com>
2018-08-25 21:21:42 +05:30
Tian Hao
ee787085f9 component/bt : decrease memory consumption by conn number
1. BLE only with 9(max) connection will decrease 3K DRAM
2. BR/EDR only with 7(max) connection will decrease 16K DRAM
3. Any of BLE or BR/EDR connection number decrease will also decrease DRAM consumption
4. Decrease one BLE connection will save about 1KB DRAM
5. Decrease one BR/EDR ACL connection will save about 1.2KB DRAM
6. Decrease one BR/EDR SCO/eSCO will save 2KB DRAM.
7. fix some definition and kconfig
8. remove 1.2k of vhci tx cache and make .bss & .data to heap about 1.4K
9. modify BT Reserved Memory size and modify example to support new bt kconfig
2018-08-14 02:29:17 +00:00
Hrishikesh Dhayagude
f610249bdd Reclaim BT/BTDM BSS and Data in bluetooth memory release function
1. Modify esp_bt_controller_mem_release() to release BTDM BSS and Data to heap if
ESP_BT_MODE_BTDM mode is passed to it
2. Add a new API esp_bt_mem_release() which internally calls
esp_bt_controller_mem_release() with the provided mode and then if mode
is ESP_BT_MODE_BTDM, releases BT BSS and Data to heap.

Background:
For Wi-Fi and BT/BLE applications, for e.g. the usecase is like when
Bluetooth is used for provisioning and once the device is connected to the Wi-Fi
AP, we can turn off Bluetooth completely. In such scenarios, it should be possible to
reclaim all the memory of Bluetooth. Although, currently this does not
happen.

Experiment:
Made the following modifications to examples/bluetooth/gatt_server :
1. Added support of simple_wifi to it
2. Moved all the bluetooth related code under CONFIG_BT_ENABLED config
option
3. Calculated the free heap in 2 similar scenarios:
   i. Disabled BT (CONFIG_BT_ENABLED undefined) and checked the free
heap after STA connected
   ii. Kept BT enabled and disabled it after STA connected and checked
the free heap
Ideally, the numbers for i., ii. above should have been similar. But
there was a delta of almost 30-31K. (i. > ii.)
4. Through make size-components checked the common BSS for libbta.a and libbtdm_app.a
and found it to be almost 30K. Data is around 1K

Solution:
1. Modified the linker script to mark the BSS and Data for these libraries and
free it when ESP_BT_MODE_BTDM mode is passed to mem release APIs.
2. Verified that the free heap is comparable for i. and ii. above.

Note: It is known that once this is done, Bluetooth can only be used
again post reboot.

Signed-off-by: Hrishikesh Dhayagude <hrishi@espressif.com>
2018-07-20 11:33:26 +05:30
Angus Gratton
e33ec5ccf4 Merge branch 'bugfix/btdm_tx_power_value' into 'master'
fix bluetooth(dual-mode) tx power value

See merge request idf/esp-idf!2503
2018-06-13 07:43:13 +08:00
Tian Hao
294a4bd1f4 fix bluetootm(dual-mode) tx power value 2018-06-12 19:18:47 +08:00
Mahavir Jain
5a9fc19f38 bt: fix typo in documentation
Signed-off-by: Mahavir Jain <mahavir@espressif.com>
2018-06-06 18:22:32 +05:30
zhiweijian
c8e848b0ff Component/bt: fix start adv 2018-05-30 17:10:51 +08:00
zhiweijian
340ad5c430 Component/bt: fix scan duplicate 2018-05-21 15:23:15 +08:00
wangmengyang
4c4e143a2f component/bt: implement HFP Hands Free Unit Role 2018-05-21 11:33:30 +08:00
wangmengyang
22e21b38f7 component/bt: implement bluetooth modem sleep mode, one mode for BLE only and another for dual mode bluetooth
1. provide options for bluetooth low power mode
2. provide two options for bluetooth low power clock: main XTAL and external 32kHz XTAL
3. provide function and callbacks to control bluetooth low power mode, including enable/disable sleep, software wakeup request, low power clock settings, check power state, etc
4. modify vhci API vhci_host_send_packet to use blocking mode
5. note that DFS and bluetooth modem sleep can not be used together currently.
2018-05-19 15:37:26 +08:00
Tian Hao
e660785532 component/bt : add BR/EDR TX power set 2018-04-25 15:28:19 +08:00
Hrishikesh Dhayagude
4a7d445301 components/bt examples/bluetooth: Fix typographical errors
Signed-off-by: Hrishikesh Dhayagude <hrishi@espressif.com>
2018-02-13 13:25:33 +05:30
Tian Hao
65bdb2d7ff component/bt : fix btdm mem release cause 0x3ffbbb28-0x3ffbdb28 add to region but should not.
1. fix the bug. Modify the condition that esp_bt_controller_mem_release() shoud be only called before esp_bt_controller_init() or after esp_bt_controller_deinit()
2. modify the example to use esp_bt_controller_mem_release()
2017-12-13 11:38:39 +08:00
Tian Hao
583dceb69b component/btdm : change bt.h name to esp_bt.h to form the name prefix 2017-12-08 10:33:50 +08:00