Fix dependency tree so that lwip doesn't depend on any specific network
interface component.
Network interface drivers shall depend on esp_netif.
esp_netif shall depend on lwip (but not on any specific interface
driver) -- it optionally depends on vfs and esp_eth (need ethernet
header for L2/bridge mode)
* esp-netif to optionally depend on esp-eth (only for l2tap config)
* esp_eth.h now includes the original ethernet header and the
ethernet-netif glue layer
* Updated examples and test to explicitely use esp-eth dependency if
needed
This updates the minimal supported version of CMake to 3.16, which in turn enables us to use more CMake features and have a cleaner build system.
This is the version that provides most new features and also the one we use in our latest docker image for CI.
lwip was added to common requirements list to provide "sys/socket.h"
header to all components without additional requirements specified.
However, lwip pulls in a lot of dependencies on other components.
This commit removes lwip from common requirements to reduce the number
of components in G1-only apps.
To compensate for this removal, the following changes are made:
- newlib (which is a common requirement) has a public dependency on
lwip if lwip is present in the build. This ensures that sys/socket.h
is available as long as lwip component is included into the build.
- lwip is now a public requirement of esp-tls since esp_tls.h includes
sys/socket.h header.
- lwip is now a public requirement o esp_http_client because
sys/socket.h is included from esp_http_client.h
- lwip is now a private requirement of esp_wifi for "smartconfig_ack"
- lwip is now a private requirement of mqtt for socket functions
- lwip is now a public requirement of tcp_transport because
esp_transport_tcp.h includes sys/socket.h header.
- mbedtls checks if lwip component is present in the build. If yes,
net_sockets.c is added to the build, along with the dependency on
lwip. Previously lwip was a public requirement of mbedtls
unconditionally.
system/g1_components test app is updated to reflect the changes
Default public dependencies of a component before and after this
change, except common requirements:
- esp_timer (public dependency of freertos)
- bootloader_support (public dependency of esp_hw_support)
- vfs (public dependency of lwip)
- esp_wifi (public dependency of lwip)
- esp_event (public dependency of esp_wifi)
- esp_netif (public dependency of esp_event)
- esp_eth (public dependency of esp_netif)
- esp_phy (public dependency of esp_wifi)
After:
- esp_timer (public dependency of freertos)
- bootloader_support (public dependency of esp_hw_support)
Altogether, the following components have been always added as
public requirements to all other components, and are not added now
([breaking-change]):
- lwip
- vfs
- esp_wifi
- esp_event
- esp_netif
- esp_eth
- esp_phy
Application components now need to explicitly declare dependencies on
these components.
This commit updates the visibility of various header files and cleans up
some unnecessary inclusions. Also, this commit removes certain header
include paths which were maintained for backward compatibility.
Memory check (leaks and heap tracing) functions for unit tests
now have a separate file now and are renamed for more consistency.
BREAKING CHANGE: renamed memory check function names which may be used
in unit tests outside IDF.
Updated MQTT submodule: git log --oneline 89894bd0c611b1392967fe90bb49682eba858383...b86d42c130ac64a916ce6cf299d99f9756692394
* Added support for client with empty id
* Fixed user requested disconnect to correctly send MQTT disconnection message
* Fixed reconnection request with disabled autoreconnect
* Added qos and dup flags to data events
* Added Support for suback massage payload in mqtt events
Detailed description of the changes (89894bd0c6...b86d42c130):
* Adds the possibility of client with empty id
- See merge request esp-mqtt!114
- esp_mqtt commit 09287a1156
- esp_mqtt commit 1fd50dd2cb
- Related IDF-4124
* Client: Disconnect/Reconnect improvements
- See merge request esp-mqtt!113
- esp_mqtt commit 3f05b1aedc
- esp_mqtt commit 86e40f8615
- Related https://github.com/espressif/esp-mqtt/issues/206
- Related https://github.com/espressif/esp-mqtt/issues/208
* Events: Support qos/dup flags and suback payload in mqtt events (GitHub PR)
- See merge request esp-mqtt!112
- esp_mqtt commit de47f1c341
- esp_mqtt commit e1d5a9402f
- Related https://github.com/espressif/esp-mqtt/issues/200
- Related https://github.com/espressif/esp-mqtt/pull/203
Add TRY_ENTRY_CRITICAL() API to all for timeouts when entering critical sections.
The following port API were added:
- portTRY_ENTER_CRITICAL()
- portTRY_ENTER_CRITICAL_ISR()
- portTRY_ENTER_CRITICAL_SAFE()
Deprecated legacy spinlock API in favor of spinlock.h. The following API were deprecated:
- vPortCPUInitializeMutex()
- vPortCPUAcquireMutex()
- vPortCPUAcquireMutexTimeout()
- vPortCPUReleaseMutex()
Other Changes:
- Added portMUX_INITIALIZE() to replace vPortCPUInitializeMutex()
- The assembly of the critical section functions ends up being about 50 instructions longer,
thus the spinlock test pass threshold had to be increased to account for the extra runtime.
Closes https://github.com/espressif/esp-idf/issues/5301
The following changes have been made:
1. All FreeRTOS kernel source files are now placed in the
freertos/FreeRTOS-Kernel folder to match with the upstream folder structure.
2. All kernel include files are now placed in freertos/FreeRTOS-Kernel/include.
3. All port files are now placed in freertos/FreeRTOS-Kernel/portable.
4. All additions/customizations are placed in freertos/esp_additions.
5. All other miscellaneous files (README, License files etc.) are moved to
freertos/FreeRTOS-Kernel folder to match with the upstream.
6. Updated esp-cryptoauthlib to latest commit to resolve FreeRTOS
include dependencies.
Signed-off-by: Sudeep Mohanty <sudeep.mohanty@espressif.com>
Updated MQTT submodule: git log --oneline f10321a53b53a146ee299cfecc320b89c0cf6611...89894bd0c611b1392967fe90bb49682eba858383
* Fix build issue if cert bundle disabled
* Fix build issue if ws transport disabled
* Add config to set retransmission interval
Detailed description of the changes (f10321a53b...89894bd0c6):
* Added config option to configure custom retransmission interval
- See merge request espressif/esp-mqtt!110
- esp_mqtt commit 1b009c840b
- Related https://github.com/espressif/esp-mqtt/pull/199
* Configuration conflicts were verified, logged but not reported to the user.
- See merge request espressif/esp-mqtt!102
- esp_mqtt commit 88f4b8ed50
* Fixed build issue if cert bundle disabled
- See merge request espressif/esp-mqtt!109
- esp_mqtt commit 4a89bff610
- esp_mqtt commit 1b71980575
- esp_mqtt commit 5b3c81ee48
- Related https://github.com/espressif/esp-mqtt/pull/198
- Related https://github.com/espressif/esp-idf/issues/7535
* Removes unnecessary outbox_cleanup
- This function were used on old version to handle QoS 2 messages. It's no longer necessary in current implementation.
- See merge request espressif/esp-mqtt!108
- esp_mqtt commit ebef896b00
* Fixed return an error when fail to enqueue
- The functions that enqueue messages didn't had a return for the handler, with this the error was only logged instead of returned whichmay cause the user to have an ID for a message that was not published.
- See merge request espressif/esp-mqtt!103
- esp_mqtt commit 7471177fe7
* CI: Use qemu image based on esp-env:v4.4-1
- Replaced the temporary qemu image with the official qemu:v4.4-1-20210517 derived from the esp-env:v4.4-1 test environment
- See merge request espressif/esp-mqtt!107
- esp_mqtt commit 231b274962
Closes https://github.com/espressif/esp-idf/issues/7535
The OUTBOX_EXPIRED_TIMEOUT_MS was 30*1000 in original esp-mqtt code.
Don't change the default OUTBOX_EXPIRED_TIMEOUT_MS without good reason,
which may has impact on memory usage for existing applications.
Fixes: 0ea20bed43 ("MQTT: add configurable msg expired timeout")
Signed-off-by: Axel Lin <axel.lin@gmail.com>
