Current esp_wifi_get_config doesn't return correct value of h2e config which will cause h2e config to be overwritten in Station connected handler.
Add one preventative condition to take care of this.
During the wifi deinit last_scan_res_used is not set to 0 which will cause it be used directly after reinit.
Added changes which will set it to 0 during init and deinit.
1. add check in the gdma driver, to prevent multiple channels connecting
to the same peripheral
2. memory copy DMA ID will occupy the peripheral's DMA ID on some ESP
targets (e.g. esp32c3/s3). We should search for a free one when
install async memcpy driver.
Closes https://github.com/espressif/esp-idf/issues/10575
If memory protection is enabled on esp32c3 and esp32s3, we don't want to the heap component to see
the startup stack memory as D/IRAM but as DRAM only. Introduce a new type to make this possible in
the same fashion the regular D/IRAM regions are handled.
- `protocomm` depends on a config option `CONFIG_WIFI_PROV_BLE_FORCE_ENCRYPTION`
from `wifi_provisioning`; however, a lower layer component (`protocomm`) should
not have any `#ifdef` guard dependent on an upper layer component (`wifi_provisioning`).
- Added a new `ble_link_encryption` flag in `protocomm_ble_config_t` to manage the same
Closes https://github.com/espressif/esp-idf/issues/9443
Currently loading of esp32s3 ROM ELF symbols fails with
"Cannot access memory at address 0x3ff194ad". Let's perform
add-symbol-file after connection to the target.
Signed-off-by: Frantisek Hrbata <frantisek.hrbata@espressif.com>
For efuse example test, we set CONFIG_SECURE_ENABLE_SECURE_ROM_DL_MODE=y
by default because in the python test we expect secure boot is in RELEASE mode
This commit fixes an issue where paths on Windows are case insensitive, for instance when setting the build folder its name would be converted to lowercase.
The culprit is our realpath() function, that was calling os.path.normcase() internally, since we are removing that call it makes sense to just remove the function entirely and call os.path.realpath() wherever necessary.
Closes https://github.com/espressif/esp-idf/issues/10282
1. Corrected format
2. Fixed double free of memory issue in case of disconnection
3. Updated sdkconfig.default file to have correct value for
COC_MAX_NUM configuration setting
By default, the driver will reset the GPIO used by the MCPWM capture
channel at exit. But in some special use cases, the same gpio may also
be used by another device, which shares the same gpio configuration,
resetting the gpio is not expected.
Closes https://github.com/espressif/esp-idf/issues/10327
