Commit Graph

25 Commits

Author SHA1 Message Date
Vamshi Gajjela
ffdbeee9f6 sdmmc: Add erase command-38. Support erase/trim/discard/sanitize
options.

Erase command (38) for SD cards allows option for erase/dicard/fule
operation at block level and for MMC cards supports option for
discard/trim at block level. When Sanitize is executed only the
portion of data that was unmapped by a Discard command shall be
removed by the Sanitize command.

Unit test cases added to verify ERASE feature in SD/SDSPI mode.
TRIM/DISCARD/SANITIZE tests for eMMC devices.

Closes https://github.com/espressif/esp-idf/pull/7635
Closes https://github.com/espressif/esp-idf/issues/7623
2022-03-05 16:02:01 +05:30
Ivan Grokhotkov
6782971332 sdmmc: accept CMD_DONE being is reported together with RTO
SDMMC databook specifies that when an error interrupt is generated
(such as RTO, DCRC, RCRC), CMD_DONE interrupt is also generated.
The code used to break out of the event handling loop to wait for
another interrupt event to happen, reporting CMD_DONE.
However if interrupt processing was delayed, it is possible that
a single event contains both RTO and CMD_DONE. Previously, CMD_DONE
would not be handled, and the state machine would be stuck in
SDMMC_SENDING_CMD state, until a timeout. This didn't change the
outcome (err=0x107), but delayed the handling of response timeout
event.

Fix by not breaking out of the event handler, optionally processing
the CMD_DONE interrupt if it has been reported in the same message.
2022-02-20 12:39:36 +00:00
Jan Brudný
690974e32f driver: update copyright notice 2021-05-25 17:43:57 +02:00
Angus Gratton
66fb5a29bb Whitespace: Automated whitespace fixes (large commit)
Apply the pre-commit hook whitespace fixes to all files in the repo.

(Line endings, blank lines at end of file, trailing whitespace)
2020-11-11 07:36:35 +00:00
Anton Maklakov
afbaf74007 tools: Mass fixing of empty prototypes (for -Wstrict-prototypes) 2019-08-01 16:28:56 +07:00
Ivan Grokhotkov
78fab8a0f9 sdmmc: implement partial DDR support
Works for 3.3V eMMC in 4 line mode.
Not implemented:
- DDR mode for SD cards (UHS-I) also need voltage to be switched to 1.8V.
- 8-line DDR mode for eMMC to be implemented later.
2018-08-30 13:11:54 +08:00
Ivan Grokhotkov
6d46eed8e4 sdmmc: enable host auto_stop only for certain commands
Perviously host send_auto_stop flag would be set for every data
transfer over 1 block long. This caused stop commands to be sent
after CMD53, which shouldn't be done. Fix by adding an explicit list
of commands for which send_auto_stop should be set.
2018-07-13 03:28:10 +00:00
michael
5b37a96ddc feature(sdio): allow to enable internal pullups of the SDIO host and slave as a debug feature
NOTE: the internal pullups are not totally reliable, please do add external pullups on your bus.
2018-06-14 12:04:22 +08:00
Ivan Grokhotkov
9379d7b9f9 sdmmc: wait for command done event even if data transfer is over
This fixes errors logged on the console: sdmmc_req:
handle_idle_state_events unhandled: 00000004 00000000

The issue happens if "data done" event occurs before "command done".
State machine code did not check *which* event occurred in
SENDING_CMD state, and went to IDLE or SENDING_DATA state on any
non-error event. In this case, we can't process "data done" event
until command has completed. This change introduces "unhandled event"
mask, which is carried over from one run of process_events to the
other. This allows waiting for the "command done" event to complete,
and then process "data done" event.

Ref TW17126.
2018-05-15 09:59:20 +08:00
Ivan Grokhotkov
cf81db40a2 sdio: allow reads/writes with lengths not divisible by 4
CMD53 in byte mode supports transfers of any number of bytes between 1
and 512. This change removes limitation that the number of bytes must
be divisible by 4. Host quirk, that such transfers must be split into
two commands (one for the aligned part and the other one for
unaligned) is taken into account.
2018-05-15 09:59:20 +08:00
Ivan Grokhotkov
829c6cef39 sdmmc host: when parameter validation fails, exit cleanly
This fixes lock-up which happened when sending a command, if the
previous command has failed.
2018-04-24 19:08:44 +08:00
Ivan Grokhotkov
5f97e6bebb sdmmc: fill as many DMA descriptors as possible 2018-04-11 11:06:50 +08:00
Ivan Grokhotkov
20a8c3318a sdmmc: do expect CMD_DONE interrupt after response timeout
Existing code assumed that response timeout is not followed by CMD_DONE,
which was not true, in fact. Host datasheet states that CMD_DONE is sent
after an RTO.
2018-04-11 11:06:50 +08:00
Ivan Grokhotkov
01cd2fce73 sdmmc: print error status only once 2018-04-11 11:06:50 +08:00
Ivan Grokhotkov
5fc6fb58ea sdmmc: don't whitelist the opcodes when handling response timeout
All the commands which do not have a response must have their flags set
accordingly. Therefore the host will not send RTO interrupt if response
is not expected. It is a bug in the code logic if it happens otherwise.
2018-04-11 11:06:50 +08:00
Ivan Grokhotkov
84d6793f77 sdmmc: don't set data_expected on SET_BUS_WIDTH command
SET_BUS_WIDTH is not a data transfer command. Extensive search in the
host datasheet and SD card spec did not reveal the origin of this hack
or 'feature'. Further testing showed that removing this does not lead to
regressions.
2018-04-11 11:06:50 +08:00
Ivan Grokhotkov
42de5fb76d sdmmc: send init sequence before CMD0 2018-04-11 11:06:50 +08:00
Ivan Grokhotkov
330b6bd668 sdmmc: lock APB frequency while in transaction 2017-10-18 14:19:20 +08:00
Ivan Grokhotkov
3cf23ff77d sdmmc: allow command timeouts to be configured
Previously the timeout was set to the same value (1000ms) for all kinds
of commands. In some cases, such as with slow cards, write commands
failed to complete in time.
This change makes command timeouts configurable via sdmmc_host_t
structure, and also makes default timeouts different for ordinary
commands and write commands.

Closes https://github.com/espressif/esp-idf/issues/1093

Ref TW15774.
2017-10-13 08:16:07 +08:00
Ivan Grokhotkov
f908425b13 sdmmc: introduce is_app_cmd flag, check it along with opcode
‘make_hw_cmd’ function checks opcodes in a few cases. Comparing opcode
does not tell the whole story, because for some SD commands there is are
APP commands with the same opcodes. This change introduces a flag which
indicates whether the next command is going to be an APP command.
The check for APP_SET_BUS_WIDTH command is updated to use this flag.
This fixes a bug with an unexpected STOP_TRANSMISSION command sent after
SWITCH_FUNC command, which has opcode 6, same as APP_SET_BUS_WIDTH.
2017-08-16 18:59:04 +08:00
Ivan Grokhotkov
e6258ac6cb sdmmc: don’t flip word order in MMC_RSP_BITS
MMC_RSP_BITS helper function had a hack that it flipped word order in
the response, assuming that response size is 4 words. This hack does not
work for responses which are not 4 words long (such as the SWITCH_FUNC
response, which is 64 words long).

This change removes the hack and the matching word order reversal code
in sdmmc driver.
2017-08-16 18:59:04 +08:00
Ivan Grokhotkov
512898edee sdmmc: fix reads/writes to/from unaligned buffers
SDMMC hardware treats all buffers as aligned, and ignores 2 LSBs of
addresses written into DMA descriptors. Previously SDMMC host driver
assumed that data buffers passed from SDDMC command layer would be
aligned. However alignment checks were never implemented in the command
layer, as were the checks that the buffer coming from the application
would be in DMA capable memory. Most of the time this was indeed true.
However in some cases FATFS library can pass buffers offset by 2 bytes
from word boundary. “DMA capable” restriction may be broken if pSRAM
support is used.

This change adds buffer checks to the SDMMC host driver (alignment and
DMA capability), so that the host layer will error out for incompatible
buffers. In SDMMC command layer, a check is added to read and write
functions. If an incompatible buffer is passed from the application, new
buffer (512 bytes size) is allocated, and the transfer is performed
using {READ,WRITE}_SINGLE_BLOCK commands.
2017-08-01 03:15:11 +08:00
James Sarrett
b772024699 send bus initialization bits before MMC_GO_IDLE_STATE command to initialize card after poweron 2017-06-22 11:08:47 +08:00
Ivan Grokhotkov
49848eaed5 sdmmc: handle card removal when CD is not used
When SD card is removed during transaction, SDMMC peripheral can report
a range of errors, such as timeouts, CRC errors, start/end bit errors.
Under normal conditions (card is inserted), SDMMC peripheral also generates
command done or data done interrupts. When the card is removed, such
interrupts may not be always generated.

This change fixes handling of timeout interrupts and SBE interrupts.
It also adds a one second timeout into the event processing loop. This
timeout allows applications to recover in cases when the SDMMC peripheral
doesn’t generate command/data done event on card removal.
2017-04-19 12:50:51 +08:00
Ivan Grokhotkov
edd924f273 sdmmc: add peripheral driver and protocol layer 2017-01-09 04:51:24 +08:00