Cao Sen Miao
6c0aebe279
esp_flash: add opi flash support in esp_flash chip driver, for MXIC
2021-09-07 14:44:40 +08:00
Cao Sen Miao
559c1ac3f9
esp_flash: add support mxic as a main flash under spi mode
2021-09-05 00:33:28 +08:00
Armando
a3dc625da6
mspi: support 120MHz Quad Flash and PSRAM on ESP32S3
2021-08-31 16:06:44 +08:00
sly
11dfd802e0
esp32h2: add rtc clock support
2021-08-26 11:25:39 +08:00
Armando
d325f4d557
mspi: support octal flash 120M STR mode on esp32s3
2021-08-19 10:44:30 +08:00
Shu Chen
2b9e8fed71
esp32h2: add esp32h2 build target
...
Add esp32h2 support in the following components:
* Kconfig
* components/esptool_py
* components/riscv
* components/xtensa
* tools
2021-07-01 19:51:33 +08:00
Armando
bc248278f8
spiflash: add octal spi psram support on 727
2021-06-25 19:41:57 +08:00
me-no-dev
b64fd872bc
Allow esptool's download stub to be disabled by other options and applications
...
Currently USB CDC Download requires the `--no-stub` option of `esptool`. This change inverts the Kconfig option to negative, so that it can be `selected` by other options or enabled in applications through `sdkconfig.defaults`.
2020-09-16 03:25:53 +00:00
Angus Gratton
f1ac79747b
monitor: Add a "Same as UART Console baud rate" setting
...
Usually the monitor will want to run at the same speed as the boot log output.
2020-07-10 16:58:05 +10:00
Angus Gratton
d45eabe676
esptool: Add support for ESP32-S2 Secure Download Mode
...
* Pass --no-stub from build system if configured to enable ESP32-S2 Secure Download Mode
* Update esptool submodule
2020-05-28 17:52:15 +10:00
Angus Gratton
5bd75b134d
esptool: Set 80MHz SPI flash speed for ESP32-S2 & future chips
...
Most ESP32 devices will also work at 80MHz, but third party boards/modules
may not have been tested at this speed so the default is kept at 40MHz for safety.
2020-05-20 06:19:34 +00:00
Angus Gratton
47bbb107a8
build system: Use CMake-based build system as default when describing commands
2019-07-08 17:31:27 +10:00
Roland Dobai
997b29a9ca
Rename Kconfig options (components/esptool_py)
2019-05-21 09:32:55 +02:00
Roland Dobai
37126d3451
Correct Kconfigs according to the coding style
2019-01-29 13:37:01 +01:00
Angus Gratton
2909fc182b
esptool: Remove tabs from KConfig.projbuild
2018-05-29 16:34:45 +10:00
Angus Gratton
2f4079ebb2
cmake: Hide serial port settings in menuconfig when using cmake
2018-05-29 16:34:45 +10:00
Angus Gratton
4a2f1f0354
esptool: Add note that ESPTOOLPY_PORT & ESPTOOLPY_BAUD are ignored when using idf.py
2018-04-30 09:59:20 +10:00
Angus Gratton
527720fb5b
esptool: Update esptool.py to integrate reset fix for older dev boards
...
Originally marked "Reset with ESP32R0 Windows workaround", but proven to be
necessary on some other platforms as well. This is now integrated into the
default esptool.py reset behaviour.
Closes #305 https://github.com/espressif/esp-idf/issues/305
2017-03-03 15:34:04 +11:00
Angus Gratton
68cba2a1fb
Bootloader: Support switching to Quad I/O mode during boot process
2017-02-09 08:44:05 +11:00
Angus Gratton
03551ec2da
build system: Add 'make monitor' target from arduino-esp32
...
Originally added to arduino-esp32 by @me-no-dev. It's so useful, we
want it in esp-idf as well! :)
2017-01-03 10:59:10 +11:00
Angus Gratton
d245f016ea
esptool: Add new options to reset before/after, detect flash size
2016-12-30 14:19:46 +11:00
Ivan Grokhotkov
42827ff869
bootloader, menuconfig: add flash size setting support
2016-10-21 15:27:25 +11:00
Jeroen Domburg
5a0e374a46
Set default SPI flash access mode to DIO
2016-09-08 10:22:15 +08:00
Jeroen Domburg
669e85758c
Add flash freq selection to menuconfig
2016-09-06 14:24:28 +08:00
Jeroen Domburg
4272996ebe
Add QIO/QOUT/DIO/DOUT select for esptool.py
2016-09-06 14:24:14 +08:00
Ivan Grokhotkov
bd6ea4393c
Initial public version
2016-08-17 23:08:22 +08:00
