Since these functions receive the pointer to reent structure, they
should set errno in it rather than using thread-local errno.
This didn't cause practical issues because console functions in IDF
are only called from threads, and in that case 'r' is a pointer to
the thread-local structure, so &errno is the same thing as
&__errno_r(r). Still, fixing this for consistency.
When CONFIG_VFS_SUPPORT_IO is disabled, _read_r and _write_r
implementations in syscalls.c are used to provide console I/O via
esp_rom_uart_tx_one_char/esp_rom_uart_rx_one_char.
When newlib opens a (FILE*) stream, it calls fstat to check if the
underlying file is character-oriented. In this case, it configures the
stream to use line buffering. Otherwise (or if fstat fails) the stream
is opened as block buffered.
Since fstat wasn't provided, stdin/stdout/stderr streams got opened in
block buffered mode. For console, we need line buffered output so that
the stream buffer is flushed each time a complete line (ending with
'\n') is sent to stdout or stderr.
Fix by implementing _fstat_r stub, setting st->st_mdoe=S_IFCHR.
* Adds implementations of __{atomic,sync}_nand_fetch_n. These builtins
were implemented for other operations but were not defined for NAND.
* Adds implementation of __atomic_OP_fetch_n for all OPs.
* Adds implementation of __sync_OP_and_fetch_n for all OPs.
Reported in https://github.com/espressif/arduino-esp32/issues/5948
Add following bugfixes
1. Station not able to connect when WPS pin is pressed first on AP.
2. PBC overlap getting detected for selected registrar PIN APs.
3. Station not considering authorised MACs for PIN method.
4. For PIN methodm If no AP is found, station will loop through
APs in its vicinity and try to do WPS with them one by one till
WPS timeout occurs. This is for some APs which do not set
selected registrar correctly.
The release of the semaphore indicating the item was successfully sent must be the last semaphore released. The receiver may be in another task and may delete the Ringbuffer (such as with a return code across tasks design pattern) if they are through with the Ringbuffer.
The function xRingbufferSendAcquire followed by xRingbufferSendComplete had the semaphores released in the proper order and that same pattern should have been used in xRingbufferSend and xRingbufferSendFromISR. This commit fixes this order.
Issue (IDFGH-6030) #7716 describes the problem in more detail.
Closes IDFGH-6030, https://github.com/espressif/esp-idf/issues/7716
Closes IDFGH-6036, https://github.com/espressif/esp-idf/pull/7721
In commit de22f3a4e5, combination of
hardware and software MPI (bignum) related approach was used to
work around chip (e.g. ESP32-C3) limitation of max 3072 bits support.
This was done using linker "--wrap" flag but since the relevant API is
being used in same translation (compilation unit), hardware mode was not
getting used in some cases (e.g., RSA key generation).
This commit modified internal mbedTLS API and makes software+hardware
combination deterministic.
The body of the bootloader_debug_buffer function was conditioned to
macros that were never defined, resulting in deactivated code.
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
Initial version of freemodbus master port files have been added to ESP-IDF based on https://github.com/armink/FreeModbus_Slave-Master-RTT-STM32.
The overall repository license, at the time of adding these files, has been BSD 3-clause. However at that time, several port files carried LGPL license headers. As the author of these files confirmed in https://github.com/armink/FreeModbus_Slave-Master-RTT-STM32/issues/61#issuecomment-977828450, this wasn't intentional. ESP-IDF version of modbus master port has been rewritten to target FreeRTOS instead of RT-Thread, but the license headers remained from the original version. This commit corrects this, replacing the license of these files with BSD 3-clause.
This issue was earlier fixed in commit 79e74e5d5f
but during migration to newer FreeRTOS release, it got introduced again.
This commit fixes thread safety issues with configASSERT() calls
regarding the value of uxSchedulerSuspended. A false negative
occurs if a context switch to the opposite core occurs in between
the getting the core ID and the assesment.
Relevant https://github.com/espressif/esp-idf/issues/4230
Closes https://github.com/espressif/esp-idf/issues/7726
Closes IDFGH-6041
Furthermore, RX_EOF_EN should only be set when SPI Slave is configured
for segment transfer mode and the "ms_data_bitlen" field is configured
to control the "IN_SUC_EOF" interrupt. Since "ms_data_bitlen" is not
set anymore for S2, C3 and S3, "RX_EOF_EN" should be cleared.
The maximum input length for the SPI Slave should be applied to the read
buffer configuration, not for the write buffer. Similarly, the output
configuration should also target the write buffer.
MOSI and MISO enablement were conditioned to the existence of TX
and RX buffers, respectively. This is valid for the SPI Master,
but for the SPI Slave the opposite is expected.
mesh: fix the issue that layer2 node connect to lower-layer node when FIXED-ROOT root disappeared(backport_v4.3)
See merge request espressif/esp-idf!15660
Fix for packets containing unexpected domains, such as openthread.thread.home.arpa.
If we find this packet we set the name entry as invalid, but continue with parsing as the packet might contain related queries for us.
Closes https://github.com/espressif/esp-idf/issues/7694
For the CID10564,10384,10280,10098,10038,The memory was released in other place.
For the CID10365,it release the memory in the function when sent successfully.
For the CID10268,10011, we need not change the code.
the state again and run the "ble_master_soft_rst()" if neesed.
2.fix HCI_Read_Clock error
3.fix HCI_Create_Connection_Cancel error
4.fix ASSERT_WARN during epr
esp_http_client: Fix HEAD request will affect the all next HTTP requests unless we close the HTTP request(backport v4.3)
See merge request espressif/esp-idf!15714
Increase reset assertion time from 100µs (as specified minimum in the datasheet) to 150µs.
Some specimen of the LAN8720 need the reset signal asserted longer than 100µs to initialise properly. Otherwise they are in a zombie state where they are establishing and loosing an Ethernet link once in a seconds interval.
During the early start, the virtual eFuse mode can call erase operations when OS is not yet running.
Possible workaround: CONFIG_SPI_FLASH_YIELD_DURING_ERASE=n
Fixed for the legacy flash driver as well.
The psram cache bug fix was also being applied to the bootloader binary (for cmake),
which doesnt do any psram access.
Applying this fix would increase the binary size, as much as 300 bytes in worst case scenarios
* CI errors led me to believe these were needed, but as it turns out the
load/store intrinsics are required even when idf is built by gcc when
linking to a clang based project.
* remove ... postfix inside `SYNC_LOCK_TEST_AND_SET` expansion
Provide emulated atomic load & store libcalls for u8, u16 & u32 integer
types. This is required when building with Clang as llvm does not lower
these operations to native load / stores, where as gcc does.
Provide `sync_lock_test_and_set` atomic implementations for all
supported integer types.
Closes https://github.com/espressif/esp-idf/issues/7591.
Closes https://github.com/espressif/esp-idf/issues/7592.
The issue is related to the non-sequential way of description when
such fields going together sequential.
Related to esp32h2 chip for eFuses: MAC_FACTORY and MAC_EXT.
The issue is in wrong indexes of MAC_EXT.
MAC_EXT got indexes like it is joined to MAC_FACTORY.
const esp_efuse_desc_t* ESP_EFUSE_MAC_FACTORY[] = {
&MAC_FACTORY[0],
&MAC_FACTORY[1],
&MAC_FACTORY[2],
&MAC_FACTORY[3],
&MAC_FACTORY[4],
&MAC_FACTORY[5],
NULL
};
const esp_efuse_desc_t* ESP_EFUSE_MAC_EXT[] = {
&MAC_EXT[6],
&MAC_EXT[7],
NULL
};
This commit fixed it to:
const esp_efuse_desc_t* ESP_EFUSE_MAC_EXT[] = {
&MAC_EXT[0],
&MAC_EXT[1],
NULL
};
It was when in the partition table there is a partition with type="data" and suptype=""(empty),
in this case type=1, suptype=0. It is similar to otadata partition.
This commit fixes it, now it will handle it as type=1, suptype=6 (ESP_PARTITION_SUBTYPE_DATA_UNDEFINED).
