Reading the link state via PHYSTS was incorrect, as it only reflects the
link state bit from BMSR. BMSR latches link down events, and are not
cleared without being read. (See 802.3-2008 section 2, section 22.2.4.2.13)
This leads to the original DP828xx code only supporting link up, then a
single link down event.
Switch to reading the link state via BMSR, but continuing to read the
negotiation results via PHYSTS and ANLPAR. This is inline with
LAN8720x, RTL8201, KSZ80xx phy drivers, and other opensource drivers for
the DP838xx family of devices.
Tested on a private board with a DP83825i PHY. No publically available
boards using the original DP83848 are known of for testing.
Signed-off-by: Karl Palsson <karl.palsson@marel.com>
In esp_eth_phy_802_3.h:
Make 802.3 API public.
In esp_eth_phy_802_3.c:
Add loopback check in eth_phy_802_3_set_duplex(). Now ESP_ERR_INVALID_STATE is invoked on attempt to set duplex to half
when loopback is enabled.
Remove static property from esp_eth_phy_802_3_autonego_ctrl and esp_eth_phy_802_3_loopback.
In esp_eth_phy_dm9051.c:
Add dm9051_loopback() because DM9051 requires setting additional bit to enable auto-negotiation loopback for data to be
received. Add dm9051_set_speed() which invokes ESP_ERR_INVALID_STATE on attempt to set speed to 10 Mbps when loopback is
enabled because such speed configuration is unsupported.
In esp_eth_phy_ksz80xx.c:
Add ksz80xx_set_speed() which invokes ESP_ERR_INVALID_STATE on attempt to set speed to 10 Mbps when loopback is enabled
because such speed configuration is unsupported.
In esp_eth_phy_ksz8851snl.c:
Change phy_ksz8851_set_duplex() to invoke ESP_ERR_INVALID_STATE on attempt to set duplex to half when loopback is enabled.
In esp_eth_phy_dp83848.c, esp_eth_phy_rtl8201.c:
Add autonego_ctrl implementation which prevents enabling autonegotiation when loopback is enabled.
Add loopback implementation which disables autonegotiation prior to enabling loopback.
In esp_eth_phy_lan87xx.c:
Add autonego_ctrl implementation which prevents enabling autonegotiation when loopback is enabled.
Add loopback implementation which disables autonegotiation prior to enabling loopback.
Fix link indicating being down when loopback is enabled by force setting link up.
Use Root certificate (`DigiCert Global Root G2`) for the
`dl.espressif.com` and `espressif.com` test endpoints.
This fixes the test failure introduced due to renewal of
the intermediate certificate.
This commit marks all functions in interrupt_controller_hal.h, cpu_ll.h and cpu_hal.h as deprecated.
Users should use functions from esp_cpu.h instead.
Fix dependency tree so that lwip doesn't depend on any specific network
interface component.
Network interface drivers shall depend on esp_netif.
esp_netif shall depend on lwip (but not on any specific interface
driver) -- it optionally depends on vfs and esp_eth (need ethernet
header for L2/bridge mode)
* esp-netif to optionally depend on esp-eth (only for l2tap config)
* esp_eth.h now includes the original ethernet header and the
ethernet-netif glue layer
* Updated examples and test to explicitely use esp-eth dependency if
needed
This updates the minimal supported version of CMake to 3.16, which in turn enables us to use more CMake features and have a cleaner build system.
This is the version that provides most new features and also the one we use in our latest docker image for CI.
