Commit Graph

201 Commits

Author SHA1 Message Date
Anurag Kar
1f6622b2d1 CMake : Secure Boot support added 2018-11-06 17:09:55 +05:30
Ivan Grokhotkov
73d1b5a7a0 bootloader: verify that loaded image does not overlap bootloader code
Fixes CVE-2018-18558
2018-10-26 12:44:10 +08:00
Ivan Grokhotkov
9240bbb708 esp32: remove ROM functions redefined in IDF from LD script
In some cases, linker could choose to use ROM functions instead of the
ones defined in IDF.
For functions used in ROM stub table, this would lead to infinite
recursion when the corresponding function was called from ROM.
For crypto functions, some of these were modified in IDF, and
incompatible with ROM counterparts.
2018-10-02 01:20:04 +00:00
Angus Gratton
4d99513bdb bootloader: Fix crash enabling flash encryption
Regression in 9c715d7946
2018-09-26 18:26:06 +10:00
Renz Christian Bagaporo
d9939cedd9 cmake: make main a component again 2018-09-11 09:44:12 +08:00
Angus Gratton
b355854d4d Merge branch 'master' into feature/cmake 2018-09-05 10:35:04 +08:00
Mahavir Jain
4a987dacca bootloader: keep bootloader_common code to retention region
It is possible to utilize some of the routines related to otadata
partition validation, after firmware image is downloaded to RAM. Hence
these routines should be part of app cpu cache, so that they do not
get overwritten by firmware.

Signed-off-by: Mahavir Jain <mahavir@espressif.com>
2018-08-29 12:04:32 +00:00
Angus Gratton
ff2404a272 Merge branch 'master' into feature/cmake 2018-08-16 17:14:17 +10:00
Angus Gratton
f0d74b1c64 bootloader: Ensure bootloader never returns to caller
* Fixes some "noreturn" functions in bootloader utils which did return (causing fatal CPU
  exceptions).
* Marks bootloader entry as "noreturn", preventing "user code done" from stalling boot
  Partial fix for https://github.com/espressif/esp-idf/issues/1814 TW20016
  (Comprehensive fix for this issue will be enabling WDT during bootloader, coming shortly.)
2018-07-19 16:24:11 +10:00
Angus Gratton
7b9009ca5c bootloader: Fix secure boot & flash encryption functionality
Fixes regression in 3e0ac4db79.
2018-07-13 15:26:18 +10:00
Ivan Grokhotkov
5551b3f616 bootloader: move iram_seg 1k up to have better looking idf_monitor output
When 2nd stage bootloader loads the ROM bootloader, it prints a
message similar to "entry 0x40080xxx", which idf_monitor decodes
(using application ELF file) as one of the reset vectors (xxx is <
400h). This moves the iram_seg of bootloader 1k up to prevent overlap
of bootloader .text and application vectors, making the output look
nicer. There is still a chance that the entry point decodes as some
symbol in application ELF file, but at least it won't have
"Exception" in its name.
2018-07-04 12:33:11 +08:00
Angus Gratton
bf10447b82 cmake: Fix issues when IDF_PATH is not set in environment
Support cases where IDF_PATH may be passed in on the cmake command line,
or inferred from a (hardcoded absolute or relative) path to project.cmake
2018-06-18 14:48:03 +10:00
Konstantin Kondrashov
3e0ac4db79 partition_table: Expanding the space under the bootloader
Allows you to move the partition table, it gives more space for the bootloader.
Added a new utility - parttool.py. This utility can search for the offset and/or size of the partitions by name and type/subtype. Use for getting APP_OFFSET and PHY_DATA_OFFSET.
The linker(esp32.bootloader.ld) made changes that allow you to write a custom bootloader code more.

TW14125
2018-06-08 18:47:29 +05:00
Angus Gratton
6b9784cc45 Merge branch 'master' into feature/cmake_update 2018-05-31 14:46:23 +10:00
Konstantin Kondrashov
ae10abff2f bootloader: Add factory reset and start test app
Added feature:
- reset firmware to Factory app.(by long pressing of the button)
- boot Test app. (by long pressing of the button)
- Added feature erase data partitions from factory reset.

TW10281
TW10280
2018-05-24 16:56:49 +05:00
Angus Gratton
858b95a924 cmake: Add build system tests 2018-04-30 09:59:20 +10:00
Angus Gratton
1cb5712463 cmake: Add component dependency support
Components should set the COMPONENT_REQUIRES & COMPONENT_PRIVATE_REQUIRES variables to define their
requirements.
2018-04-30 09:59:20 +10:00
Angus Gratton
12be399762 cmake: Add link-time dependencies for linker script files
Requires some hackery around limitations in CMake's LINK_DEPENDS
2018-04-30 09:59:20 +10:00
Angus Gratton
88df8fd293 cmake: Use cmake_lint project, tidy up all CMake source files 2018-04-30 09:59:20 +10:00
Angus Gratton
abef220b13 cmake: Allow selecting toolchain file based on config
Refactor IDF "project" functionality under a wrapping of the default
"project" command, so we can tweak it a bit...

Will need more testing in other environments.
2018-04-30 09:59:20 +10:00
Angus Gratton
e94db98e73 link bootloader to libgcc (shouldn't be necessary, is necessary...) 2018-04-30 09:59:20 +10:00
Angus Gratton
3fac2b2ddc cmake: Refactor bootloader_subproject into the bootloader component itself 2018-04-30 09:59:20 +10:00
Angus Gratton
674d398c93 cmake: Add partition table, and .bin file targets 2018-04-30 09:59:20 +10:00
Angus Gratton
134f2238bd cmake: Refactor main cmake project logic 2018-04-30 09:59:20 +10:00
Angus Gratton
c671a0c3eb build system: Initial cmake support, work in progress 2018-04-30 09:59:20 +10:00
Konstantin Kondrashov
86256b3541 bootloader: Refactoring
Need to make the bootloader modular so that users can redefine its functional part.

- refactoring and moving functions to the bootloader_support component
- Changed function to `void` bootloader_utility_load_image(...);

TW19596
2018-04-17 16:36:49 +05:00
Roland Dobai
744c2dcdd9 Resolve problems found by enabling -Wwrite-strings compilation flag 2018-04-10 08:53:43 +02:00
Angus Gratton
da27816314 Merge branch 'feat/add_efuse_cpu_freq_rating' into 'master'
efuse/add cpu freq rating

See merge request idf/esp-idf!1994
2018-03-29 05:59:52 +08:00
Liu Zhi Fu
072b353b45 bootloader: force SDIO 1.9V if flash is 80M
If the SPI flash frequency is 80M, the voltage of SDIO is 1.9V,
otherwise, it can configured to 1.8V or 1.9V via menuconfig.
2018-03-19 16:39:54 +08:00
Darian Leung
8b1277c55f efuse/add cpu freq rating
This commit adds support for CPU max freqeuency rating
bits in CPU. Bootloader will now print an error if attempting
to 160MHz rated ESP32 at 240MHz.

EFUSE_CHIP_VER_RESERVE has been replaced by the
frequency rating bits. Dependancies on EFUSE_CHIP_VER_RESERVE
have been changed to use EFUSE_CHIP_VER_PKG
2018-03-07 12:16:51 +08:00
Angus Gratton
c69af42b96 esp32: Fix backwards compatibility for pre-v2.1 bootloaders
Older bootloaders don't set RTC_XTAL_FREQ_REG or call rtc_clk_init(),
app needs to pick this up.

Reported at
https://esp32.com/viewtopic.php?f=2&t=3939&p=17836
2017-12-18 13:45:57 +11:00
Ivan Grokhotkov
bad8d3ce57 bootloader: don't log anything before uart_console_configure is called 2017-12-08 13:15:40 +08:00
Angus Gratton
fccc30d2d5 bootloader: Only apply VDDSDIO 1.8V->1.9V if regulator is enabled
Fixes bug if regulator is disabled via efuse.
2017-11-27 10:33:41 +11:00
Alexey Gerenkov
692a890232 esp32: Adds Stack Smashing Protection Feature
These changes add posibility to enable GCC stack protector via menuconfig
for all source files in project.
2017-11-17 12:08:36 +03:00
Ivan Grokhotkov
afa9a85396 bootloader: wait for UART FIFO to be empty before switching frequency 2017-11-09 13:17:58 +08:00
Wangjialin
d034bc9ca0 bootloader: add configuration of flash pins and VDDIO boost 2017-11-03 16:29:56 +08:00
Ivan Grokhotkov
5a88f90a33 soc/rtc: warn if detected XTAL frequency does not match configured one
Since 9a8c0392, XTAL frequency is set to 40MHz by default, and users
of 26MHz boards need to select 26MHz manually. Most users are not aware
of this change, and existing getting started guides do not mention that
XTAL frequency needs to be set for some boards. So users are left with
garbage output from UART without any clue what to check.

This change adds a warning in case specific XTAL frequency was set, and
it does not match automatically detected one. This should help users
fix the issue.
2017-09-11 11:42:26 +08:00
Angus Gratton
11a87ca811 Merge branch 'bugfix/bootloader_ota_sel' into 'master'
Fix bootloader OTA regression

See merge request !1205
2017-09-05 07:25:08 +08:00
Angus Gratton
1cd2ce2471 bootloader: Fix regression preventing OTA updates
Regression introduced in 43e231c.

Thanks to @yanbe for pointing out issue in https://github.com/espressif/esp-idf/pull/955

This is a different fix, tries to keep the behaviour that 43e231c was aiming to correct (unnecessarily testing an
invalid slot more than once.)
2017-09-04 17:37:28 +10:00
Jeroen Domburg
34372a091c Add initial SPI RAM support. This adds support for an ESP-PSRAM32 chip connected to the default flash pins and GPIO 16 and 17. The RAM is mapped to address 0x3F800000, but otherwise ignored by esp-idf as of yet. 2017-09-04 12:05:49 +08:00
Jeroen Domburg
518edac42f Add GD chip into qio data, so (at least my) ESP-WROVER uses QIO mode succesfully. 2017-09-01 16:53:05 +08:00
Angus Gratton
43e231c916 bootloader: Don't unnecessarily test OTA app slots more than once per boot
Would loop more than once through each OTA possibility, but really only
needs to try each slot once.
2017-08-23 11:19:42 +10:00
Angus Gratton
5eef5e7a5d bootloader: Fallback if OTA data is invalid
Make bootloader more robust if either OTA data or some OTA app slots are corrupt.
2017-08-15 09:42:19 +10:00
Ivan Grokhotkov
967611cfaa Revert "bootloader: Add option to build with Link Time Optimisation enabled"
This reverts commit d1b66a08c1.
2017-07-24 05:14:31 +08:00
Angus Gratton
871ba41a09 bootloader: Remove unnecessary KEEP on data/bss sections, save static RAM 2017-07-19 18:31:59 +10:00
Angus Gratton
d1b66a08c1 bootloader: Add option to build with Link Time Optimisation enabled 2017-07-19 18:31:59 +10:00
Angus Gratton
17adb40ca8 bootloader: Calculate SHA256 hash of image on every boot
Makes app image booting more reliable (256-bit rather than 8-bit verification.)

Some measurements, time to boot a 655KB app.bin file and run to app_main() execution.

(All for rev 1 silicon, ie no 340ms spurious WDT delay.)

80MHz QIO mode:
before = 300ms
after = 140ms

40MHz DIO mode:
before = 712ms
after = 577ms

40MHz DIO mode, secure boot enabled
before = 1380ms
after = 934ms

(Secure boot involves two ECC signature verifications (partition table, app) that take approx 300ms each with 80MHz CPU.)
2017-07-19 18:31:59 +10:00
Angus Gratton
0c8888d68f bootloader: Combine loading from flash & verifying to save boot time
Still needs updating to account for secure boot.
2017-07-19 18:25:17 +10:00
Angus Gratton
ec64fa3416 bootloader flash QIO mode: Restore DIO/DOUT mode if enabling quad fails
Previously, flash was degraded to single I/O mode.
2017-07-19 15:04:09 +10:00
Angus Gratton
0715d1f8c1 bootloader: When customising SPI flash pins in efuse, set WP pin in menuconfig
Allows custom configurations for QIO/QOUT mode.
2017-07-19 15:04:08 +10:00
Angus Gratton
d664e32394 build system: Use component.mk for all components, refactor bootloader build
For config-only components, component.mk should now contain "COMPONENT_CONFIG_ONLY := 1"

Also refactored some of the generation of linker paths, library list. This required cleaning up the way the bootloader
project works, it's now mostly independent from the parent.
2017-07-19 09:10:48 +10:00