1. Add check CSA state before CSA timer process
2. Change wifi scan duration from 120ms to 100ms
3. Using deport reg instead of ahb
4. Check TID in ieee80211_recv_bar()
5. Revert to report specific reason code when receiving deauth during 4-way-handshark
6. Fix the bug that tx ampdu parameter is not from peer device
7. Refactor wifi_interface_t
8. Faster WiFi station connect improvement, avoid 100ms passive scan
9. Add FCS failed packets filter
10.Update esp32 phy lib to v4660
11.Fix csa timer issue
12.Fix country code last byte to space instead of NULL
13.Fix softap cannot forward A-MSDU
14.Fix max tx power to 20dBm
15.Fix the issue that the esp_wifi_sta_get_ap_info can't get country
1. Use flag ESP32_WIFI_ENABLE_WPA3_SAE to control WPA3 code, disabling
it code footprint reduces by 7.7kB in libwpa_supplicant.a
2. Fix handling of multiple AP credentials in WPS, apps need update
to handle the new event for the fix to work
1. Add description for esp_wifi_set_inactive_time()
2. Add documentation to avoid using WiFi modem sleep for WiFi/BT coexistence
3. Remove description of unusable API esp_wifi_restart()
4. Update esp_now_fetch_peer discription
5. Update table format prblm for esp_wifi_set_max_tx_power()
6. Update description for ssid and password
1. Modify LR for esp32
2. Optimize some debug logs for probe response
3. Optimize phy and soc files
4. Fix the bug that no event for connect
5. Fix the bug that set_channel doesn't work for softAP
6. Add sta connect again ap sent disconnect event
7. Add set/get inactive time api
8. Fix connect hidden AP doesn't update information
9. Add rf test long short support
1. Fix FIX-ROOT does not reconnect to router when disconnect reason is too many
2. Add API esp_mesh_print_scan_result
3. Modify not to reset mesh_xonseq of self and children when flush_upstream_packets
4. Fix not arm parent monitor when a parent candidate is cleared without sending an event to mesh layer
5. Fix the new voted root does not reconnect to router if rssi is weak
H/W decryption of Mgmt frames was disabled for PMF and done through
S/W. If ESPNOW packets go through this path, it affects backward
compatibility since method of decrypting Mgmt packets is different in H/W.
To address PMF + ESPNOW Co-existance, CCMP decryption method is modified
for ESPNOW packets so that they can be decrypted correctly. Since Tx
of ESPNOW packets can still be done in H/W alongside PMF, no change
required in encryption method in S/W.
Co-Authored-By: Nachiket Kukade <nachiket.kukade@espressif.com>
Co-Authored-By: zhangyanjiao <zhangyanjiao@espressif.com>
Co-Authored-By: kapil.gupta <kapil.gupta@espressif.com>
1. Fix TX DMA buffer issue
2. API esp_wifi_get_config add acquisition sta.listen_interval
3. Configure bandwidth and phy mode to store NVS
4. If AP's tsf has been restarted, STA will disconnect from AP.
5. Do not reset softAP's tsf except it restart
6. fix the wifi regdomain update bug
7. fix the bug for airkiss find hidden AP fail
8. fix addba and first ampdu send bar
Added following as part of this change
1. Removed auth_changed event
2. Updated doc regarding usage of WPA/WEP secuiry modes
3. Fixed WPA2 enterprise authmode threshold.
1. fix the bug for softAP update second channel wrong
2. change wifi_scan_time_t from union to struct
3. query country code wrong when policy change from manual to auto
4. fix the timeout issue of EAPOL four-way handshake
5. fix the crash issue when fetch peer after delete the cur_peer
Added WPA3 Testcases support for -
1. Anti-Clogging Token Request support
2. Return correct status from SAE modules for invalid scenarios
3. Add PMK Caching support for WPA3
wifi lib includes fixes for below PMF Certification issues -
1. Check return status of decrypt operation. Fixes 5.3.3.1.
2. Allow PMF negotiation for WPA2-Enterprise. Fixes 5.3.3.2, 5.3.3.4.
3. Add NULL check on key before encrypting PMF, fixes crash.
1. Add changes in 4-way handshake path to allow SAE key mgmt.
2. Support for configuring WAP3 at init time, added Kconfig option.
3. Handle and propagate error conditions properly.
Under WPA3-Personal, SAE authentication is used to derive PMK
which is more secure and immune to offline dictionary attacks.
1. Add modules to generate SAE commit/confirm for the handshake
2. Add modules that build and parse SAE data in Auth frames
3. Add WPA3 association and key mgmt definitions
4. Invert y-bit while solving for ECC co-ordinate -
Once an X co-ordinate is obtained, solving for Y co-ordinate
using an elliptical curve equation results in 2 possible values,
Y and (P - Y), where p is the prime number. The co-ordinates are
used for deriving keys in SAE handshake. As par the 802.11 spec
if LSB of X is same as LSB of Y then Y is chosen, (P - Y) otherwise.
This is not what is implemented, so fix this behavior to obtain the
correct Y co-ordinate.
This change ports SAE(Simultaneous Authentication of Equals)
feature from wpa_supplicant and makes it work with mbedtls
crypto APIs. Currently only group 19 is supported. A sample
SAE handshake is included in the testcase. Other minor
changes for DH groups are also included.
1. Add CCMP, AES crypto modules for unicast protected Mgmt frames
2. Add support for computing SHA256 MIC on Bcast Mgmt frames
3. Add support for storing iGTK during 4-way handshake.
4. Provide APIs to MLME for utilizing the SW crypto modules
1. Add APIs for configuring PMF through set config.
2. Map Supplicant and Wifi Cipher types.
3. Add support for PMF negotiation while generating RSN IE.
1,Reduce WiFi bin size
2,Add TX packets size check
3,Fix scan get rssi error
4,Add wifi stop check at WiFi deinit entry
5,coex adjust scheme when bt is connected status
6,Return fail when setting AP's channel is out of range
7,Fix the bug for setting channel when WiFi in NULL mode
Fix following WiFi issues:
1. Fix WiFi buffer reload issue
2. Fix AMSDU decrypt issue
3. Fix some WiFi timer issues
4. Fix the crash caused by too big of association request RSN information
5. Fix the crash caused by block scan
6. Fix the bug for getting channel and bandwidth
7. Fix some Sniffer bugs
8. Fix some ESP-NOW issues
1> fix the bug when modifying the channel info of peer node
2> fix the crash when modifying peer node between unencrypted and encrypted
3> fix the bug for fetch peer
4> modify the esp_wifi_set_channel() function
5> fix the bug that the channel parameter doesn't work when adding peer node
Closes https://github.com/espressif/esp-idf/issues/2833
Closes https://github.com/espressif/esp-idf/issues/4311
1. Fix WiFi scan leads to poor performance of Bluetooth.
2. Improve WiFi connect success ratio when coexist with Bluetooth.
3. Check if WiFi is still connected when CSA or beacon timeout happen.
4. add coex pre init
Fix following WiFi bugs:
1. Fix the bug for API_CHECK_ENABLED
2. Fix the bug that wpa2 enterprise sta can connect open AP
3. Fix TKIP/CCMP PN replay attack detection bug
4. Increase buffer number type from uint8_t to uint16_t to support more than 255 buffers
5. Avoid recalculating PMK if esp_wifi_set_config() is not called
6. Fix 5.5M signal test bug
1. Fix high beacon and broadcast packets loss ratio of WiFi to
make MDNS test pass.
2. Improve stability of WiFi performance with a little sacrifice
of throughput.
3. Improve BLE advertising and connection performance with
dynamic priority. It sacrifices a little WiFi throughput, but
achieves balance between WiFi and Bluetooth.
1. resend eb which are pending in g_ic.tx_buf due to channel switch.
2. add lock for mgmg/xon/bcast to protect send from user flush.
3. softap: add check if secondary offset is correct when start softap.
4. softap: in inactive timer handler, add check if child bss is removed to avoid removing it again.
5. disable A-MPDU for non-root.
6. fix reusing a freed eb.
7. fix when node becomes root, it does not record assoc value to nvs.
8. discard unnecessary forwarded group packets.
9. fix toDS state is not updated in time.
10. fix s_sta_cnx_times is not cleared when deinit causes root sends ADD annoucement.
11. root: increase beacon timeout time from 6 seconds to 15 seconds to delay initiation of reconnection.
12. add esp_mesh_get_tsf_time to return TSF time.
13. send the whole routing table multi-times.
14. clear candidate settings if not receive candidate beacon within 8 seconds.
Move supplicant to idf and do following refactoring:
1. Make the folder structure consitent with supplicant upstream
2. Remove duplicated header files and minimize the public header files
3. Refactor for WiFi/supplicant interfaces
