This commit adds a subset of the DWC OTG configuration values to the
'usb_dwc_ll.h' file. Only relevant configuration values have been added.
Some DWC OTG releated constants have also been moved from 'usb_dwc_hal.h'
to 'usb_dwc_ll.h' and renamed.
This commit refactors SOC_USB_PERIPH_NUM as follows:
- Renamed to SOC_USB_OTG_PERIPH_NUM to avoid confusion with USB Serial JTAG
- Updated to unsigned integer "1U"
- Updated some build rules to depend on SOC_USB_OTG_SUPPORTED instead
In esp_eth_phy_802_3.h:
Make 802.3 API public.
In esp_eth_phy_802_3.c:
Add loopback check in eth_phy_802_3_set_duplex(). Now ESP_ERR_INVALID_STATE is invoked on attempt to set duplex to half
when loopback is enabled.
Remove static property from esp_eth_phy_802_3_autonego_ctrl and esp_eth_phy_802_3_loopback.
In esp_eth_phy_dm9051.c:
Add dm9051_loopback() because DM9051 requires setting additional bit to enable auto-negotiation loopback for data to be
received. Add dm9051_set_speed() which invokes ESP_ERR_INVALID_STATE on attempt to set speed to 10 Mbps when loopback is
enabled because such speed configuration is unsupported.
In esp_eth_phy_ksz80xx.c:
Add ksz80xx_set_speed() which invokes ESP_ERR_INVALID_STATE on attempt to set speed to 10 Mbps when loopback is enabled
because such speed configuration is unsupported.
In esp_eth_phy_ksz8851snl.c:
Change phy_ksz8851_set_duplex() to invoke ESP_ERR_INVALID_STATE on attempt to set duplex to half when loopback is enabled.
In esp_eth_phy_dp83848.c, esp_eth_phy_rtl8201.c:
Add autonego_ctrl implementation which prevents enabling autonegotiation when loopback is enabled.
Add loopback implementation which disables autonegotiation prior to enabling loopback.
In esp_eth_phy_lan87xx.c:
Add autonego_ctrl implementation which prevents enabling autonegotiation when loopback is enabled.
Add loopback implementation which disables autonegotiation prior to enabling loopback.
Fix link indicating being down when loopback is enabled by force setting link up.
fix(nimble):Handled the Load access fault crash caused due to an invalid setting of index-variable 'reattempt_idx'.(v5.0)
See merge request espressif/esp-idf!26950
From: Arno Moonen <arno.moonen@airios.eu>
Follows original message from Arno Moonen <arno.moonen@airios.eu>
While integrating the ESP-IDF into our existing CMake structure,
I've come across quite some hurdles. Most I've been able to fix
in our CMake files, however this one I could not.
Most of the targets created by the esptool_py component assume
that the EXECUTABLE IDF build property (which contains the name
of the CMake executable target) always equals the name of the
created binary.
This is however not always true. For instance, in our setup we use
CMAKE_EXECUTABLE_SUFFIX_C and CMAKE_EXECUTABLE_SUFFIX_CXX in our
toolchain file (both set to .elf). If we do add_executable(my_app),
the target binary file would actually be my_app.elf.
In order to fix this, I've updated it to use the TARGET_FILE generated
expression. That way we also no longer need the EXECUTABLE_DIR IDF build
property here.
I've fixed this on v5.0.1 (as that's the ESP-IDF version I'm currently
trying to integrate), but I assume it should be easy to apply the same
fix to newer versions and the master branch as well.
Note that this problem might exist in multiple places where EXECUTABLE
is being used. While going through the ESP-IDF code base, I even noticed
that a few places actually already seem to use the TARGET_FILE expression.
To be honest the property name might be somewhat confusing as well, as it
is actually the executable target.
Closes https://github.com/espressif/esp-idf/pull/12558
