1. Increase timeout value for NDP Accepted/Rejected events.
2. Update publisher ID incase publisher restarts(service).
3. Ignore service discovery frames with invalid/inactive service ID.
4. Update NAN documentation
1) Fix issue during split scan to allow for data tx.
2) Fix issue when parsing wpa_ie to set correct authmode when AP
supports both WPA_EAP and WPA_EAP_SHA256 authmode.
Closes https://github.com/espressif/esp-idf/issues/11202
3) Fix an occasional crash during sta roam.
4) Add home_channel_dwell_time to wifi_scan_config_t. This allows
configuration of the time spent between scanning consecutive
channels for tx.
2. Remove user configurable flag fsd_reqd from NAN publish config
3. Fix issue wherein NDL of previously cancelled service is obtained in peer record of new service with no NDL
Update wifi lib with below -
1. Create NAN Discovery SM for beaconing & cluster formation
2. Create NAN interface for Tx/Rx of beacons & action frames
3. Add commands & events for NAN Services Publish/Subscribe/Followup
4. Add NAN Datapath definitions, Events, Peer structures
5. Support for forming and parsing of Datapath related attributes
6. Modules for NDP Req, Resp, Confirm, Term, Peer management
7. NAN Interface related additions in Datapath, Data Tx Q's
In addition include below changes -
1. Add netif and driver support for NAN Interface
2. Add simple examples for Publisher-Subscriber usecases
3. Add an advanced console example that supports commands
for NAN Discovery, Services & Datapath
4. Add wifi_apps for providing better NAN API's and Peer management
Co-authored-by: Shyamal Khachane <shyamal.khachane@espressif.com>
modem retention: Support esp32c6 wifi MAC and baseband sleep retention
sleep_modem: wifi MAC modem wakeup protect in modem state before PMU trigger sleep enable request
sleep modem: provide a interface to get whether the Modem power domain is allowed to power off during sleep
add i2c_ana master header file to project
auto beacon: release PMU's lock on root clock source (it is locked in the PLL)
wifi receiving beacon frame in PMU modem state strongly depends on the BBPLL
clock, PMU will forcibly lock the root clock source as PLL, when the root
clock source of the software system is selected as PLL, we need to release
the root clock source locking.
When it is judged that the PLL is locked by PMU after wakeing up from the PMU
modem state, switch the root clock source to the PLL in the sleep process (a
critical section).
auto beacon: fix the failure to receive broadcast/multicast frames in modem state
When the multicast field in the beacon frame received in the PMU modem state is
True, the PMU switches to the PMU active state (the PMU waits for the HP LDO to
stabilize and then restores the MAC context) and starts to receive
broadcast/multicast frames (Broadcast/Multicast frames will be sent after a
minimum delay of 48 us after the beacon frame), because the PMU waits for the HP
LDO to stabilize too long (~154 us), which will cause broadcast/multicast frame
reception to be missed.
auto beacon: select the PLL clock source as the REGDMA backup clock source when the PMU switches to ACTIVE from MODEM state
update Digital Peripheral (M2A switch) REGDMA restore time parameter
auto beacon: fix the issue that only channel 1 can connect to AP in modem state
Update wifi libs with below changes -
1. reject AP when assoc comeback time given is greater than 5 seconds
2. handle when assoc req is received before SA query procedure is finished
Closes https://github.com/espressif/esp-idf/issues/9428
