alex/esp-idf
alex/esp-idf
1
0
Fork 0
mirror of https://github.com/espressif/esp-idf.git synced 2024-10-05 20:47:46 -04:00
Code Issues Actions 2 Packages Projects Releases Wiki Activity
6,332 Commits 20 Branches 148 Tags 384 MiB
a0eedf112f
Commit Graph

6332 Commits

This Branch
This Branch
All Branches
Author SHA1 Message Date
Angus Gratton
3eaf8f1a84 Merge branch 'bugfix/secure_boot_padding_v3_1' into 'release/v3.1' 
secure boot: Fix padding issue (backport v3.1)

See merge request idf/esp-idf!2833
 2018-07-25 08:59:31 +08:00
Ivan Grokhotkov
ef38eb0323 Merge branch 'bugfix/bootloader_dev_zero_app_count_v3.1' into 'release/v3.1' 
bootloader: Fix issue - bs->app_count is zero but ota_data have valid entry (backport  v3.1)

See merge request idf/esp-idf!2847
 2018-07-25 00:14:43 +08:00
fuzhibo
c6be772242 fix(sleep): swap touchpad num in wakeup status 2018-07-24 18:08:29 +08:00
Wang Jia Lin
c892c96f9a Merge branch 'bugfix/fix_uart_timeout_bug_when_enable_reftick_v3.1' into 'release/v3.1' 
driver(uart): Fix uart time_out bug when using ref_tick for releasev3.1

See merge request idf/esp-idf!2810
 2018-07-24 17:55:55 +08:00
Konstantin Kondrashov
7f2edf8528 bootloader: Fix issue - bs->app_count is zero but ota_data have valid entry 
If we have the partition table without any ota_apps but in ota_data have
valide entry, in this case we get an error(hang). This commit fix this
case. If bs->app_count is zero when selecting the factory app.

Closes https://github.com/espressif/esp-idf/issues/2218
 2018-07-24 15:41:49 +08:00
Angus Gratton
9b6769411a Merge branch 'bugfix/deep_sleep_flush_uart_v3.1' into 'release/v3.1' 
sleep: fix flushing UARTs when entering deep sleep (backport v3.1)

See merge request idf/esp-idf!2816
 2018-07-24 14:06:59 +08:00
Angus Gratton
e55f55531c esp32 tests: TLS test: use same size stack for static & non-static task 
Use constant instead of magic number of task priorities.
 2018-07-24 15:44:12 +10:00
Angus Gratton
0f665dfb0d esp32: Fix race in "TLS Test" where s_task can go out of scope before cleanup finishes 
Probable cause for CI failures of "LoadStoreError" after this task finishes running.
 2018-07-24 15:44:12 +10:00
Wangjialin
b2f1dd6a16 bugfix(ledc): fix bugs reported from unit-test and github. 
1. In ledc_set_duty_and_update, return if duty updated. Close https://github.com/espressif/esp-idf/issues/2082
2. fix ledc_set_freq function for low speed mode.
 2018-07-24 13:22:50 +08:00
kooho
989396ef27 Add some comments in pcnt.h. 2018-07-24 10:46:50 +08:00
hou wen xiang
b3a2f85c70 driver(uart): Fix uart time_out bug when using ref_tick for releasev3.1 2018-07-24 09:57:55 +08:00
XiaXiaotian
bd768edca2 check WiFi library git commit id in unit test 2018-07-23 20:03:43 +08:00
Jiang Jiang Jian
fdf61f7c45 Merge branch 'bugfix/beacon_info_do_not_update_after_user_scan_v3.1' into 'release/v3.1' 
Wifi: bugfix of beacon info don't update after user scan (backport v3.1)

See merge request idf/esp-idf!2780
 2018-07-23 20:02:24 +08:00
Ivan Grokhotkov
ccd431c7ed Merge branch 'feature/nvs_part_gen_improvements_backportv3.1' into 'release/v3.1' 
Feature/nvs part gen improvements (backport v3.1)

See merge request idf/esp-idf!2799
 2018-07-23 13:30:19 +08:00
Angus Gratton
e1e4e08fa8 app_update: Don't double-verify secure boot signature during OTA 
esp_image_load() already verifies the signature
 2018-07-23 13:45:55 +10:00
Angus Gratton
f8b191cfae secure boot: Pad to avoid data after the signature mapping into the address space 
Because address space is mapped in 64KB pages, it was possible for unauthenticated data after the
app .bin to become mapped into the flash cache address space.

This problem is solved by 2 changes:

* "esptool elf2image --secure-pad" will pad the image so that the signature block ends close to the
  64KB boundary. Due to alignment constraints it will be 12 bytes too short after signing (but
  with flash encryption, these 12 bytes are still encrypted as part of the last block and can't be
  arbitrarily changed).
* By default, secure boot now requires all app partitions to be a multiple of 64KB in size.
 2018-07-23 13:45:55 +10:00
Deng Xin
487ae78235 Wifi: bugfix of beacon info don't update after user scan 2018-07-21 10:39:43 +00:00
Jiang Jiang Jian
4314b00289 Merge branch 'bugfix/clear_intr_status_when_enable_intr_v3.1' into 'release/v3.1' 
driver(gpio): fix the gpio interrupt false triggering issue(backport v3.1)

See merge request idf/esp-idf!2806
 2018-07-21 14:36:37 +08:00
Jiang Jiang Jian
650e1f79d1 Merge branch 'bugfix/rmt_mem_num_maximum_limit_is_not_accurate_v3.1' into 'release/v3.1' 
bugfix(rmt): Modify the rmt_mem_num maximum limit value from 15 to 8.(backport v3.1)

See merge request idf/esp-idf!2808
 2018-07-21 14:25:38 +08:00
Angus Gratton
b87c822d59 Merge branch 'bugfix/secure_boot_regression_partitions_v3_1' into 'release/v3.1' 
Fix secure boot & flash encryption regression, don't verify partitions as part of secure boot (backport)

See merge request idf/esp-idf!2779
 2018-07-20 09:12:20 +08:00
negativekelvin
90c6ea59a6 Fix errors in rtc_gpio_desc values 2018-07-19 10:27:31 +03:00
Ivan Grokhotkov
7fbfb0fc9b ulp example: fix for RTC IOs 
- call rtc_gpio_init for pins which aren't configured as RTC by default
- for RTC IOs 16 and 17, read higher part of the input register
- automatically convert GPIO number into RTC IO number
- use ulp_set_wakeup_period instead of writing to register
 2018-07-19 10:27:00 +03:00
Ivan Grokhotkov
447890247a sdmmc: enable host auto_stop only for certain commands 
Perviously host send_auto_stop flag would be set for every data
transfer over 1 block long. This caused stop commands to be sent
after CMD53, which shouldn't be done. Fix by adding an explicit list
of commands for which send_auto_stop should be set.
 2018-07-19 10:23:58 +03:00
Ivan Grokhotkov
d360f6d95d sleep: fix flushing UARTs when entering deep sleep 
Since 94250e42a0, UART output is suspended when entering sleep mode
(deep or light sleep). This makes sense for light sleep, where sleep
normally takes small amount of time, and flushing the UART would add
a lot of latency. But this breaks existing behaviour for deep sleep,
where UART output was previously sent out before entering sleep mode.

Closes https://github.com/espressif/esp-idf/issues/2145
 2018-07-19 10:21:23 +03:00
XiongYu
7edc392d7c Modify the rmt_mem_num maximum limit value from 15 to 8. 2018-07-18 16:33:45 +08:00
hou wen xiang
071f7cdb49 driver(gpio) : Fixed the gpio related bug for release v3.1. 2018-07-18 15:36:57 +08:00
Piyush Shah
89b423658a nvs_partition_generator: Add support for base64 representation of Binary data 2018-07-17 19:24:04 +05:30
Piyush Shah
6d0a9fe95e nvs_partition_generator: Modifications to enable using the utility as a Python library 
And also use directly as an executable
 2018-07-17 19:24:04 +05:30
Jiang Jiang Jian
afdc73c8ab Merge branch 'bugfix/mdns_remove_backport' into 'release/v3.1' 
mdns: Minor fix for mdns_service_remove (backport v3.1)

See merge request idf/esp-idf!2784
 2018-07-17 20:50:34 +08:00
Jiang Jiang Jian
1dc9be01c4 Merge branch 'bugfix/autoip_compilation_backportv3.1' into 'release/v3.1' 
LWIP AutoIP Compilation Fixed by defining IP_IS_V4_VAL(backport v3.1)

See merge request idf/esp-idf!2787
 2018-07-17 20:49:31 +08:00
Ivan Grokhotkov
cffd28ad83 Merge branch 'bugfix/bt_os_abstraction_layer_v3.1' into 'release/v3.1' 
bt: fix OS abstraction layer for correct critical section API usage (backport v3.1)

See merge request idf/esp-idf!2713
 2018-07-17 18:53:01 +08:00
XiaXiaotian
f4c57eb764 docs: update channel state information document 
1. Move channel to the first row of the table.

    2. Remove the condition of HT20/HT40 for they are determined by
    secondary channel.

    3. Clean up the CSI table.
 2018-07-17 15:01:12 +08:00
Jiang Jiang Jian
346d6b0eaa Merge branch 'bugfix/gcc8_complation_errors_v3.1' into 'release/v3.1' 
gcc8_newlib3: Compilation warnings and errors not specific to newlib v3 (backport v3.1)

See merge request idf/esp-idf!2777
 2018-07-17 14:13:28 +08:00
Jiang Jiang Jian
0a357a4838 Merge branch 'bugfix/minor_fix_about_ip_route' into 'release/v3.1' 
lwip: minor fix about ip route

See merge request idf/esp-idf!2782
 2018-07-17 14:12:22 +08:00
Piyush Shah
76a46a0f68 LWIP AutoIP Compilation Fixed by defining IP_IS_V4_VAL() 2018-07-16 15:12:18 +05:30
Piyush Shah
8dbf96a471 mdns: Minor fix for mdns_service_remove() 
Send the Goodbye packet while removing an mDNS service as an "Authoritative" packet so
that the listeners remove the service from their records immediately.
 2018-07-16 15:07:44 +05:30
Liu Zhi Fu
60080d4893 lwip: minor fix about ip route 
Minor fix about ip4_route_src_hook()
 2018-07-16 17:21:46 +08:00
Jiang Jiang Jian
3716e3e8c4 Merge branch 'bugfix/tw23835_add_source_ip_route_for_unicast_v3.1' into 'release/v3.1' 
lwip: add source ip based route for unicast packet (backport v3.1)

See merge request idf/esp-idf!2773
 2018-07-16 17:01:31 +08:00
Angus Gratton
0b1c461e63 bootloader: Fix warning building reflashable Secure Boot image 2018-07-16 16:59:36 +10:00
Angus Gratton
ec73cebb59 bootloader: Don't verify Partition Table as part of Secure Boot 
Partition Tables are still signed for backwards compatibility, but signature is no longer checked as
part of bootloader.

Closes https://github.com/espressif/esp-idf/issues/1641
 2018-07-16 16:59:36 +10:00
Angus Gratton
ce634ef221 bootloader: Fix secure boot & flash encryption functionality 
Fixes regression in 3e0ac4db79.
 2018-07-16 16:59:36 +10:00
Alexey Gerenkov
af2a6ee826 gcc8_newlib3: Compilation warnings and errors not specific to newlib v3 2018-07-16 14:19:57 +08:00
Liu Zhi Fu
2a581e3fab lwip: add source ip based route for unicast packet 
Add source IP based route for unicast packets forwarding.
 2018-07-14 10:01:55 +08:00
Jiang Jiang Jian
7b0a926574 Merge branch 'bugfix/btdm_err_data_report_for_v3.1' into 'release/v3.1' 
bugfix/btdm_err_data_report_for_v3.1(backport v3.1)

See merge request idf/esp-idf!2751
 2018-07-13 19:16:42 +08:00
Mahavir Jain
f2c543785b bt: fix OS abstraction layer for correct critical section API usage 
Signed-off-by: Mahavir Jain <mahavir@espressif.com>
 2018-07-13 11:29:40 +08:00
Mahavir Jain
fdfe38a779 wpa_supplicant: add missing source dirs to CMake build 
Closes: https://github.com/espressif/esp-idf/issues/2168

Signed-off-by: Mahavir Jain <mahavir@espressif.com>
 2018-07-12 17:22:47 +05:30
Ivan Grokhotkov
ed27e75f50 Merge branch 'bugfix/xthal_get_interrupt_volatile_v3.1' into 'release/v3.1' 
xtensa: make XTHAL_GET_INTERRUPT, XTHAL_GET_CCOUNT volatile (backport v3.1)

See merge request idf/esp-idf!2712
 2018-07-12 17:18:06 +08:00
wangmengyang
ea30c54cda component/bt: bugfix for erroneous data reporting always enabled 2018-07-11 20:08:36 +08:00
Jiang Jiang Jian
c71c8aea55 Merge branch 'bugfix/btdm_invalid_sco_handle_for_v3.1' into 'release/v3.1' 
bugfix/btdm_invalid_sco_handle_for_v3.1(backport v3.1)

See merge request idf/esp-idf!2727
 2018-07-11 18:23:47 +08:00
Jiang Jiang Jian
46001bf6d4 Merge branch 'bugfix/rom_libgcc_functions_v3.1' into 'release/v3.1' 
Fix linking of libgcc math functions to ROM (backport v3.1)

See merge request idf/esp-idf!2711
 2018-07-11 16:45:39 +08:00