Previously the error message was
CMake Error at /home/user/esp-idf/tools/cmake/build.cmake:296 (__component_get_property):
__component_get_property Function invoked with incorrect arguments for
function named: __component_get_property
Call Stack (most recent call first):
/home/user/esp-idf/tools/cmake/build.cmake:341 (__build_resolve_and_add_req)
/home/user/esp-idf/tools/cmake/build.cmake:638 (__build_expand_requirements)
/home/user/esp-idf/tools/cmake/project.cmake:710 (idf_build_process)
CMakeLists.txt:6 (project)
Now it will be:
CMake Error at /home/user/esp-idf/tools/cmake/build.cmake:298 (message):
Failed to resolve component 'whatever' required by component 'main'.
Call Stack (most recent call first):
/home/user/esp-idf/tools/cmake/build.cmake:345 (__build_resolve_and_add_req)
/home/user/esp-idf/tools/cmake/build.cmake:642 (__build_expand_requirements)
/home/user/esp-idf/tools/cmake/project.cmake:710 (idf_build_process)
CMakeLists.txt:6 (project)
Also improved the hint to show the component name in quotes.
Closes https://github.com/espressif/esp-idf/pull/14036
[Frantisek Hrbata: fixed spelling not related to this change so spellcheck succeeds]
[Frantisek Hrbata: modified the error message to be recognized by the existing hint]
[Frantisek Hrbata: added also check in idf_component_set_property and simple tests]
Signed-off-by: Frantisek Hrbata <frantisek.hrbata@espressif.com>
There is currently a bug in the __build_resolve_and_add_req function in
tools/cmake/build.cmake where the check for registered component
requirements is incorrectly applied to the component itself rather than
its dependencies. This issue likely originated from a typo, using
component_target instead of _component_target. To prevent further
confusion, _component_target has been renamed to _req_target.
Fixing this revealed multiple incorrect dependencies for the Linux
target, which have now been resolved by explicitly specifying the
dependencies for the Linux target.
Closes https://github.com/espressif/esp-idf/issues/13447
Signed-off-by: Frantisek Hrbata <frantisek.hrbata@espressif.com>
The size of partition of type APP should be multiple of 4 KB. Partition
generation tool now make this as a mandatory requirement. This is
minimum flash erase size. If the size of the APP type partition is not
aligned to 4 KB then the last erase operation could go beyond the allocated
partition and hence may fail. This issue would only be observed when the
firmware size grows very close to the allocated partition size, and hence
causing the OTA update to fail.
For already deployed devices on-field with the size of APP partition not
aligned to flash sector boundary, it is best to ensure that firmware
size always remains within the lower 4 KB boundary of the total
allocated space. While migrating to ESP-IDF 5.3 release, partition table
for an existing project can be adjusted accordingly for the build to
succeed.
Found during discussion in https://github.com/espressif/esp-idf/pull/12460
This commit enables the standad VERSION argument for the project() macro
in ESP-IDF. The VERSION argument is compilant with the requirements of
cmake 3.16. This commit also adds new test cases for verifying the
validity of the version argument.
Merges https://github.com/espressif/esp-idf/pull/12461
Co-authored-by: Sudeep Mohanty <sudeep.mohanty@espressif.com>
It corrupts environment on macOS runner because it uses shell, not docker-executor,
and makes all tree read-only for a non-root user.
+ Replace examples with real files in example README.md
As pointed out by Fu Hanxi, the pytest_build_system job is currently
using --parallel-index and --parallel-count, which are provided by
pytest-embedded, so we should not disable it. Moreover to properly
disable pytest-embedded we should use "no:pytest_embedded". Meaning
this probably was not working as indented anyway.
Signed-off-by: Frantisek Hrbata <frantisek.hrbata@espressif.com>
On Windows, when path is specified as absolute for cmdl argument, cmake can
interpret parts of the path as invalid escape chars. For example "C:\Users\..."
will result in "Invalid character escape '\U'." Externally specified
paths should be converted into cmake's representation, which uses '/'.
This can be done e.g. by using 'get_filename_component()'. Currently
there doesn't seem to be any problem with this, but let's add a test for
this.
Suggested-by: Ivan Grokhotkov <ivan@espressif.com>
Signed-off-by: Frantisek Hrbata <frantisek.hrbata@espressif.com>
Currently if the IDF_TARGET env is set, and old sdkconfig exists with
different target value in CONFIG_IDF_TARGET, the set-target action fails
complaining about the IDF_TARGET env and value in sdkconfig being different.
We should ignore IDF_TARGET value from sdkconfig, because we are
actually setting new target and the old sdkconfig is renamed in cmake.
This can be easily reproduced with
---8<---
$ IDF_TARGET=esp32 idf.py set-target esp32
$ IDF_TARGET=esp32s3 idf.py set-target esp32s3
Project sdkconfig '/home/fhrbata/work/hello_world/sdkconfig' was generated
for target 'esp32s3', but environment variable IDF_TARGET is set to 'esp32'.
Run 'idf.py set-target esp32' to generate new sdkconfig file for target esp32.
---8<---
This also adds test for this use case to test_non_default_target.py.
Signed-off-by: Frantisek Hrbata <frantisek.hrbata@espressif.com>
Extend target checks in cmake, in case it's run directly and not via
idf.py or if idf.py misses something. This may happen
for example if cmake variables are set in project's CMakeLists.txt.
Some clean-ups are included along with the new checks and tests.
1. __target_check() function is removed. IIUC it should never fail,
because the selected target is explicitly passed as environmental
variable to kconfgen. Meaning the IDF_TARGET from environment variable may
not be actually used in kconfgen if IDF_TARGET is already set it cmake cache.
Note that the IDF_TARGET environment variable used for kconfgen is not
based on the actual IDF_TARGET environment variable set for idf.py, but
rather on the value set in __target_init() with
set(IDF_TARGET ${env_idf_target} CACHE STRING "IDF Build Target")
My understanding is that the original check was introduced to handle
situation, where IDF_TARGET was already set in cmake's cache and
the IDF_TARGET from environment variable was different. Since
the kconfgen would use the original environment variable(not
explicitly passed as it is now) the IDF_TARGET in cmake and in
sdkconfig could differ. IOW I think the original check was introduced
to cope with the following cmake behaviour
set(VARIABLE "value1" CACHE STRING "test variable")
set(VARIABLE "value2" CACHE STRING "test variable")
message("Variable value: ${VARIABLE}")
output: Variable value: value1
2. I scratched by head how it is possible that the following code
in __target_check()
if(NOT ${IDF_TARGET} STREQUAL ${env_idf_target})
could fail if IDF_TARGET is not set. For example in clean project
IDF_TARGET=esp32 idf.py reconfigure
Here env_idf_target==esp32 and IDF_TARGET is not set, so I would
expect that cmake will fail with error message that the cache
and env target do not match. The thing is that the variable
evaluation is done before the if command, so it actually
sees this
if(NOT STREQUAL esp32)
which is false and the error is not printed. It can be seen
with 'cmake --trace-expand' command. I don't know if this
was used on purpose or it worked just as a coincidence, but
I find it very confusing, so I added explicit check if the
IDF_TARGET is defined before the actual check. Same for
CMAKE_TOOLCHAIN_FILE.
3. Error messages are not formated(line-wrapped) by cmake's markup
so it's easier to check the output in tests.
Signed-off-by: Frantisek Hrbata <frantisek.hrbata@espressif.com>
Extend existing target consistency checks for the two following cases.
1. Target does not match currently used toolchain
$ IDF_TARGET=esp32s2 idf.py reconfigure
$ idf.py -DIDF_TARGET=esp32c3 build
2. Target is ambiguous, because it's specified also as env. var.
IDF_TARGET=esp32s3 idf.py set-target esp32c2
Signed-off-by: Frantisek Hrbata <frantisek.hrbata@espressif.com>
The _guess_or_check_idf_target() function has sdkconfig and sdkconfig.defaults
file names hardcoded. Since config file names may be specified with SDKCONFIG
or SDKCONFIG_DEFAULTS cmake vars, directly in CMakeLists.txt or passed in with
the -D cmake option, they are not respected.
Problem is when SDKCONFIG or SDKCONFIG_DEFAULTS is set in
CMakeLists.txt. While idf can detect cmake vars passed through it
to cmake via the -D option, detecting SDKCONFIG and SDKCONFIG_DEFAULTS
vars settings in CMakeLists.txt would require to parse it. This seems
like error prone approach. Also if the vars defined by the -D option
are passed directly to cmake, not via idf, they will not be visible to idf.
It seems reasonable to move the logic into cmake, where we know the correct
SDKCONFIG and SDKCONFIG_DEFAULTS values. So the IDF_TARGET detection/guessing
is moved into targets.cmake, where the IDF_TARGET is actually set. The target
is guessed based on the following precendence.
1) $ENV{IDF_TARGET}
2) IDF_TARGET
3) SDKCONFIG
4) sdkconfig
5) SDKCONFIG_DEFAULTS if non-empty or
$ENV{SDKCONFIG_DEFAULTS} if non-empty or
sdkconfig.defaults
6) esp32
All config files referred in $ENV{SDKCONFIG_DEFAULTS} and SDKCONFIG_DEFAULTS
are searched, compared to the current behaviour. First target found in the
above chain is used.
The original _guess_or_check_idf_target() is renamed to _check_idf_target() and
used for the target consistency checks only.
The get_sdkconfig_filename() helper is now used to get the sdkconfig file
for consistency checks. It looks in SDKCONFIG specified with the -D
option and project_description.json.
With this change config full paths are reported in messages, so it's clear
e.g. from which config the target was guessed from or which config has
consistency problem. test_non_default_target.py was adjusted to this
change and also new test for testing the IDF_TARGET guessing was added.
Signed-off-by: Frantisek Hrbata <frantisek.hrbata@espressif.com>
This commit fixes an issue where paths on Windows are case insensitive, for instance when setting the build folder its name would be converted to lowercase.
The culprit is our realpath() function, that was calling os.path.normcase() internally, since we are removing that call it makes sense to just remove the function entirely and call os.path.realpath() wherever necessary.
Closes https://github.com/espressif/esp-idf/issues/10282
Previously get_idf_build_env didn't include the default environment
(os.environ) in its output, so the environment only contained the
variables returned by "idf_tools.py export".
If PATH already contains all the right paths, "idf_tools.py export"
doesn't return the PATH variable.
Therefore the environment returned by get_idf_build_env was usually
incomplete. Fix by combining the output of "idf_tools.py export" with
os.environ.
