Song Ruo Jing
9bd20fc2ca
ledc: Fix the usage of ledc_ls_timer_update and ledc_timer_rst
...
ledc_ls_timer_update is required only when CLK_DIV and DUTY_RES bits are changed.
Calling ledc_timer_rst while re-configure PWM frequency through ledc_set_freq can cause glitch in the signal
2022-09-20 11:52:57 +08:00
Armando
2488281d17
test: added adc wifi test thresh for esp32, s2, c3, s3 on v4.4
...
Due to unit test, we can't specify runners, for adc related tests.
Whereas adc tests are easily influenced by board hw condition, e.g.
pullup/down value.
This commit increases the thresh to 200mV.
2022-09-13 11:56:37 +08:00
Alex Lisitsyn
7d8636ce0a
driver: uart rs485 fix test sync issues and fail threshold (backport v4.4)
2022-09-06 17:23:46 +08:00
Michael (XIAO Xufeng)
d424b93192
Revert "touch: add protection for touch sleep case"
...
This reverts commit 974ac3b4b8
.
2022-06-27 14:33:09 +08:00
laokaiyao
cdaa440d98
i2s: fix only right case v4.4
2022-05-07 13:43:01 +00:00
Michael (XIAO Xufeng)
b6c2c80e44
touch: add protection for touch sleep case
2022-03-27 02:44:47 +08:00
Jiang Jiang Jian
3d2700146e
Merge branch 'bugfix/uart_no_int_after_flush_v4.4' into 'release/v4.4'
...
UART: RX interrupts are now properly restored after a flush (backport v4.4)
See merge request espressif/esp-idf!17122
2022-03-07 11:03:33 +08:00
Jiang Jiang Jian
d326c5283d
Merge branch 'bugfix/ledc_consecutive_fade_v4.4' into 'release/v4.4'
...
ledc: Bugfixes for issues related to fade protection (backport v4.4)
See merge request espressif/esp-idf!16953
2022-03-07 11:00:46 +08:00
Omar Chebib
2fb3824dfa
UART: Fix custom ISR unit test
...
On ESP32, UART_INTR_BRK_DET may be triggered after setting the new ISR handler.
Disable these interrrupts.
2022-02-22 10:54:06 +08:00
Omar Chebib
1e117f2f83
UART: RX interrupts are now properly restored after a flush
...
Added a unit test to make sure the expected behavior happens
2022-02-22 02:28:21 +00:00
songruojing
83edf2dbcf
ledc: Fix FADE_NO_WAIT mode concurrency problem.
...
Add test cases for fade concurrency issue and fade timing check.
Closes https://github.com/espressif/esp-idf/issues/6710
(cherry picked from commit be2ab09832
)
2022-02-16 15:02:45 +08:00
songruojing
41e452e7d8
gpio: Fix the bug that gpio interrupt cannot be triggered on app cpu on ESP32S3
...
Closes https://github.com/espressif/esp-idf/issues/7885
(cherry picked from commit 91f1159f9c
)
2022-02-16 14:50:51 +08:00
Michael (XIAO Xufeng)
730ca0ea43
Merge branch 'bugfix/cpu_reset_perip_clk_disable_v4.4' into 'release/v4.4'
...
esp_system: change range comparsion for reset reason to specifc cpu reset reason comparison (backport v4.4)
See merge request espressif/esp-idf!15898
2022-02-10 10:32:09 +00:00
Michael (XIAO Xufeng)
8b86834a72
Merge branch 'bugfix/gpio_pin_num_fix_v4.4' into 'release/v4.4'
...
gpio: Fix some gpio pin num errors on esp32s2 and esp32c3 (backport v4.4)
See merge request espressif/esp-idf!16594
2022-02-10 10:21:52 +00:00
morris
956c6b889f
rmt: do not support rx wrap on esp32s2
...
Closes https://github.com/espressif/esp-idf/issues/8354
2022-02-09 17:29:09 +08:00
songruojing
b80a070395
esp_system: replace the range comparsion for reset reason in perip clk init with specific reset reason check, also add a test case in LEDC to check for the perip clk not being disabled after cpu reset
...
(cherry picked from commit f57456e9dd919e5eea1d3cd0caa64b5c97a4df73)
2022-01-27 09:51:00 +00:00
Zim Kalinowski
b5a1df1db4
Merge branch 'bugfix/spi_slave_test_non_dma_v4.4' into 'release/v4.4'
...
spi-slave: fix single-board: hd test failing due to DMA buffers ending up in PSRAM (v4.4)
See merge request espressif/esp-idf!16305
2022-01-06 03:11:12 +00:00
Omar Chebib
4288588751
UART: fix a bug preventing the user from freeing a previously registered ISR
...
* Closes https://github.com/espressif/esp-idf/issues/8150
2022-01-04 13:38:03 +08:00
songruojing
b25fb1111d
gpio: Fix some gpio pin num errors on esp32s2 and esp32c3
2021-12-30 12:27:14 +08:00
Armando
1ec46ad3b8
adc: support adc dma driver on all chips
2021-12-23 17:13:46 +08:00
Marius Vikhammer
68fc49c4d2
spi-slave: fix single-board: hd test failing due to DMA buffers ending up in PSRAM
2021-12-08 10:59:26 +08:00
Kevin (Lao Kaiyao)
dc20768913
Merge branch 'feature/add_i2s_es8311_example_and_loop_unit_test' into 'master'
...
example/i2s: add es8311 example and i2s unit-test
Closes IDF-3412
See merge request espressif/esp-idf!14459
2021-10-14 09:28:35 +00:00
laokaiyao
3eb09287f9
example/i2s: add es8311 example and i2s loop unit-test
2021-10-11 18:32:34 +08:00
laokaiyao
a1cadba191
touch_sensor: apply general check
2021-10-08 11:32:12 +08:00
fuzhibo
057b9d61b5
driver(touch): support touch sensor for esp32s3 platform
2021-10-08 10:39:46 +08:00
Jiang Jiang Jian
a015123a1d
Merge branch 'feature/rename_apbctrl_to_syscon' into 'master'
...
rename apbctrl to syscon
See merge request espressif/esp-idf!14524
2021-09-16 12:58:07 +00:00
Wu Zheng Hui
1080e4f6a2
rename APB_CTRL ro SYS_CON
...
save
2021-09-16 20:57:57 +08:00
Alex Lisitsyn
f40ae9cae9
Merge branch 'bugfix/fix_esp_restart_does_not_reset_timer_groups_periph' into 'master'
...
driver: fix esp_restart() does not reset timer group peripheral
Closes IDFGH-4652
See merge request espressif/esp-idf!12188
2021-09-16 11:45:42 +00:00
Alex Lisitsyn
c5d0d89508
driver: fix timer driver initialization sequence to not trigger interrupt immediately
...
add timer_hal_reset_periph()
fix timer_init() to reset timer counter during init
2021-09-16 19:45:33 +08:00
Armando (Dou Yiwen)
13b63cd9d2
Merge branch 'feature/support_adc_calibration_s3' into 'master'
...
adc: support adc calibration on s3
Closes IDF-1950, IDF-3730, and IDF-3036
See merge request espressif/esp-idf!15031
2021-09-14 08:51:03 +00:00
Kevin (Lao Kaiyao)
a287f34f88
Merge branch 'bugfix/i2s_apll_fixed_clock' into 'master'
...
i2s: fix apll bug introduced in 'refactor/i2s_driver'
Closes IDFGH-5824
See merge request espressif/esp-idf!15109
2021-09-14 08:31:12 +00:00
Armando
9aae92fd16
adc: add a ut for calibration speed
2021-09-14 11:42:50 +08:00
Andrei Safronov
9159aa58d3
tests: refactoring of the gcc's inner functions, because clang doesn't support them
2021-09-10 19:51:27 +03:00
SalimTerryLi
932d4d13f0
MCPWM/sync: expose API for configuring timer sync
...
removed example: mcpwm_basic_config
Closes https://github.com/espressif/esp-idf/issues/5429
Co-authored-by: wubowen <wubowen@espressif.com>
2021-09-09 17:33:37 +08:00
laokaiyao
dfbe76e988
i2s: fix return value when failed to register i2s
2021-09-09 10:33:15 +08:00
laokaiyao
c5afd7ce34
i2s: fix write failure on ESP32 in 32bit slave mode
2021-09-03 17:36:44 +08:00
morris
bb87fd8f08
Merge branch 'refactor/pcnt_driver_esp32s3' into 'master'
...
pcnt: soc update and hal refactor
See merge request espressif/esp-idf!14698
2021-08-20 04:23:15 +00:00
morris
3bcd9278fa
i2s: expose resource object to other component
2021-08-10 21:06:59 +08:00
morris
56760c9669
pcnt: refactor hal driver
2021-08-10 17:19:21 +08:00
SalimTerryLi
e5ddc12a08
MCPWM/capture: API workflow optimization
...
deprecate isr_register to introduce new callback based API, with framework managed interrupt routine
new HC-SR04 example
2021-08-05 19:12:58 +08:00
Michael (XIAO Xufeng)
947980ecac
Merge branch 'bugfix/uart_set_pin_use_iomux' into 'master'
...
uart: uart_set_pin function will now use IOMUX whenever possible
Closes IDF-3183
See merge request espressif/esp-idf!14318
2021-08-05 04:17:29 +00:00
Omar Chebib
779e7400b0
uart: uart_set_pin function will now use IOMUX whenever possible
...
By using IOMUX instead of GPIO Matrix for UART, it is now possible
on ESP32 boards to use the UART as a wake up source even if it is
not used as a console.
For other boards where this issue was not present, using IOMUX has
the advantage to be faster than using GPIO matrix, so a highest
baudrate can be used
2021-08-04 12:48:30 +08:00
laokaiyao
f863998e90
driver/i2s: support mclk
2021-08-04 10:20:03 +08:00
laokaiyao
3c57a6ac36
driver/i2s: refactor ll and hal
2021-08-04 10:20:03 +08:00
laokaiyao
d51b85989b
doc/i2s: update i2s programming guide on s3 & c3
2021-08-04 10:20:03 +08:00
laokaiyao
f7f8c9c11f
driver/i2s: support i2s on c3 and s3
...
1. Support i2s on esp32c3 and esp32s3
2. Refactor i2s_config_t to avoid breaking change
2. Fix a bug that receiving unavailable values from message queue when dma queue has been re-allocted
4. Support i2s unit test on esp32c3 and esp32s3
2021-08-04 10:20:03 +08:00
houwenxiang
2f1247e1c4
driver: support I2S on ESP32-S3 & ESP32-C3
...
1. refactor I2S driver.
2. support TDM mode for esp2s3 & esp32c3.
2021-08-04 10:20:03 +08:00
SalimTerryLi
f4314af913
MCPWM: expose API to set timer resolution
...
Closes https://github.com/espressif/esp-idf/issues/1101
2021-07-30 18:52:17 +08:00
morris
f907009056
Merge branch 'refactor/cleanup_mcpwm_examples' into 'master'
...
mcpwm: more clean up (example + LL + doc)
Closes IDF-3295
See merge request espressif/esp-idf!12798
2021-07-29 10:41:07 +00:00
Michael (XIAO Xufeng)
5569dedd7f
Merge branch 'bugfix/i2c_example_esp32s3' into 'master'
...
i2c: bringup on ESP32-S3
Closes IDF-3232 and IDF-3292
See merge request espressif/esp-idf!13985
2021-07-29 07:01:38 +00:00