Commit Graph

29 Commits

Author SHA1 Message Date
songruojing
24a60c12c6 uart: Provide support for esp32c2 and esp32h2
UART examples, unit test, and programming guide are all updated.
2022-03-02 11:29:13 +08:00
Darian Leung
57fd78f5ba freertos: Remove legacy data types
This commit removes the usage of all legacy FreeRTOS data types that
are exposed via configENABLE_BACKWARD_COMPATIBILITY. Legacy types can
still be used by enabling CONFIG_FREERTOS_ENABLE_BACKWARD_COMPATIBILITY.
2022-02-09 23:05:45 +08:00
Omar Chebib
708e3b6ec0 UART: RX interrupts are now properly restored after a flush
Added a unit test to make sure the expected behavior happens
2021-12-27 12:31:25 +08:00
Omar Chebib
779e7400b0 uart: uart_set_pin function will now use IOMUX whenever possible
By using IOMUX instead of GPIO Matrix for UART, it is now possible
on ESP32 boards to use the UART as a wake up source even if it is
not used as a console.
For other boards where this issue was not present, using IOMUX has
the advantage to be faster than using GPIO matrix, so a highest
baudrate can be used
2021-08-04 12:48:30 +08:00
Jan Brudný
58f79e6b00 driver: update copyright notice 2021-05-24 01:06:17 +02:00
Armando
fb8b905539 uart: add uart support on esp32s3 2020-11-24 19:12:51 +08:00
Ivan Grokhotkov
8c246fd4f3 driver: add diagnostic information into UART test, enable flow control 2020-10-02 17:33:35 +02:00
morris
9fa06719fa global: enable build uinit test for esp32-s3 2020-09-22 15:15:03 +08:00
Angus Gratton
289ad82bc0 driver test: Ensure uart write task can't overflow buffer of read task
Previously both tasks had equal priority, possible for write task and another
internal task to be scheduled at the same time - starving read task and
causing data loss.

Related to IDFCI-59
2020-07-08 16:49:06 +10:00
Ivan Grokhotkov
012f9702ad driver: make sure UART is idle before starting the test 2020-06-24 15:50:51 +02:00
houwenxiang
c7e4a284ae test(UART): fix uart tx with ringbuffer test fail issue 2020-06-15 12:03:24 +08:00
Angus Gratton
ee7cd4e1d8 driver: test: Ensure UART is fully idle before starting loopback RX/TX test
Possible fix for sporadic failures of this test in CI, may be due to a byte already
being queued in one of the FIFOs
2019-12-12 17:21:46 +11:00
Angus Gratton
b79a6c2576 driver: test: Use more detailed macros than TEST_ASSERT() to get better errors 2019-12-12 17:21:40 +11:00
houwenxiang
e4230d11ca bugfix(UART): fix uart driver spinlock misused bug
1. fix uart driver spinlock misused bug
    2. add uart driver ut test case
    3. undo the change in light_sleep_example_main.c
2019-12-03 16:06:31 +08:00
houwenxiang
f27ae9b0e2 feature: Add uart hal support. 2019-11-26 20:01:50 +08:00
Michael (XIAO Xufeng)
eb158e9a22 ci: disable UTs for esp32s2beta without runners 2019-09-04 10:53:25 +10:00
Anton Maklakov
afbaf74007 tools: Mass fixing of empty prototypes (for -Wstrict-prototypes) 2019-08-01 16:28:56 +07:00
Konstantin Kondrashov
ed22949847 driver: Add uart and i2c UTs to check ticks_to_wait in some functions 2019-06-05 10:38:23 +08:00
Ivan Grokhotkov
bb4f5617ab test: clean up "leaks" tags from most unit tests 2019-04-16 20:07:40 +08:00
Konstantin Kondrashov
5021129e71 Add support a [leaks] tag for UT 2019-04-12 09:31:23 +08:00
Alex Lisitsyn
5b7b64b946 driver: rs485 test support (remove timeout tag)
Adds test functionality with TEST_CASE_MULTIPLE_DEVICES() macro for RS485 test support.
2018-10-17 12:47:12 +02:00
Alex Lisitsyn
61bc733791 driver: rs485 test support
Adds test functionality with TEST_CASE_MULTIPLE_DEVICES() macro for RS485 test support.
2018-10-17 12:45:56 +02:00
kooho
2d0af81ccf driver(uart): Fixed uart tx_empty interrupt wdt timeout bug. 2018-08-05 06:34:34 +00:00
Ivan Grokhotkov
f3260cc30f test/uart: fix compilation warning 2018-07-24 09:56:40 +03:00
Alex Lisitsyn
9ba0808228 driver: fix rs485 test 2018-07-03 13:26:28 +02:00
Alex Lisitsyn
ef5dc73f6f driver: add rs485 half duplex interface support to uart driver (update after review)
An existing UART driver does not support RS485 half duplex mode.
This task adds this functionality to ESP_IDF UART driver.
driver/uart.c/h: updated to add support of RS485 half duplex mode
examples/peripherals/uart_echo_rs485/main/rs485_example.c: added test example
components/driver/test/test_uart.c: added test of RS485 half duplex mode
docs/en/api-reference/peripherals/uart.rst: updated documentation
test_uart.c: suppress GCC warnings about discarded const qualifiers
uart.rst: remove sphinx warning - "Duplicate explicit target name"
simple change in uart.h file
update (test_uart.c) after rebase from master
update uart.rst, uart.c, rs485_example.c
Update example description in file Readme.md
update uart.c/h, uart.rst, test_uart.c according to review results
update uart.h (uart_set_rx_timeout() description
test_uart.c remove ignore tag
uart.c/h: fix param errors
test_uart.c: Remove GCC warning supress
uart.rst: fix the notes
rs485_example.c: fix output

The tests are completed using RS485 adapters hardware connected to two ESP32 WROVER KITs.

TW#13812
Closes https://github.com/espressif/esp-idf/pull/667
Closes https://github.com/espressif/esp-idf/pull/1006
2018-07-02 15:24:58 +02:00
Alex Lisitsyn
d096b3abb8 driver: add rs485 half duplex interface support to uart driver (remove ignore tag to check ut case)
An existing UART driver does not support RS485 half duplex mode.
This task adds this functionality to ESP_IDF UART driver.
driver/uart.c/h: updated to add support of RS485 half duplex mode
examples/peripherals/uart_echo_rs485/main/rs485_example.c: added test example
components/driver/test/test_uart.c: added test of RS485 half duplex mode
docs/en/api-reference/peripherals/uart.rst: updated documentation
test_uart.c: suppress GCC warnings about discarded const qualifiers
uart.rst: remove sphinx warning - "Duplicate explicit target name"
simple change in uart.h file
update (test_uart.c) after rebase from master
update uart.rst, uart.c, rs485_example.c
Update example description in file Readme.md
update uart.c/h, uart.rst, test_uart.c according to review results
update uart.h (uart_set_rx_timeout() description
test_uart.c remove ignore tag

The tests are completed using RS485 adapters hardware connected to two ESP32 WROVER KITs.

TW#13812
Closes https://github.com/espressif/esp-idf/pull/667
Closes https://github.com/espressif/esp-idf/pull/1006
2018-07-02 15:24:58 +02:00
Alex Lisitsyn
51e9cf6848 driver: add rs485 half duplex interface support to uart driver (update after review)
An existing UART driver does not support RS485 half duplex mode.
This task adds this functionality to ESP_IDF UART driver.
driver/uart.c/h: updated to add support of RS485 half duplex mode
examples/peripherals/uart_echo_rs485/main/rs485_example.c: added test example
components/driver/test/test_uart.c: added test of RS485 half duplex mode
docs/en/api-reference/peripherals/uart.rst: updated documentation
test_uart.c: suppress GCC warnings about discarded const qualifiers
uart.rst: remove sphinx warning - "Duplicate explicit target name"
simple change in uart.h file
update (test_uart.c) after rebase from master
update uart.rst, uart.c, rs485_example.c
Update example description in file Readme.md
update uart.c/h, uart.rst, test_uart.c according to review results

The tests are completed using RS485 adapters hardware connected to two ESP32 WROVER KITs.

TW#13812
Closes https://github.com/espressif/esp-idf/pull/667
Closes https://github.com/espressif/esp-idf/pull/1006
2018-07-02 15:24:58 +02:00
kooho
0dca2d4c68 driver(uart): Fix uart_get_baudrate incorrect return value when using ref_tick 2018-05-04 09:41:41 +08:00