Commit Graph

89 Commits

Author SHA1 Message Date
baohongde
a2398f0dcc components/esp_wifi: improve coexistence performance according to specific WiFi/BT/BLE scienario
1. Improve WiFi throughput in some Classic BT scienarios(idle, inquire scan,
       connected, sniff, a2dp pause, etc).

    2. Support WiFi + Classic BT + BLE mesh coexistence scienario.

    3. Improve WiFi scan and connect succeed ratio in coexistence scienario.

    4. Do not support to choose software coexistence preference anymore for it is
       determined according to coexistence scienario automatically.

components/lwip: increase TCP send buffer and receive window limitation when TCP window scale is enabled

components/ble_mesh: Fix some bugs about ble mesh

    1. fix send acl pkt after ble have sent terminate ind modify min adv interval to 10ms.
2020-01-10 16:00:12 +08:00
baohongde
f9802da461 components/bt: Fix A2DP stuck when BLE's interval is too small
1. Fix the cumulative time switch from BLE to classic BT
2. Enhance classic BT performance while enable calssic BT and BLE at the same time
2020-01-06 20:22:04 +08:00
Chinmay Chhajed
6a91c8d440 Changes in menuconfig options to not compile any host when using hci
examples as no host is required there.
2019-11-22 11:14:50 +05:30
Angus Gratton
8675a818f9 Merge branch 'master' into feature/esp32s2beta_merge 2019-10-22 13:51:49 +11:00
Hrishikesh Dhayagude
f58d7d14c7 components/bt: Add support of NimBLE host in ESP BLE Mesh 2019-10-21 20:18:21 +08:00
Ivan Grokhotkov
5830f529d8 Merge branch 'master' into feature/esp32s2beta_merge 2019-10-02 19:01:39 +02:00
Xia Xiaotian
63019689d6 Coexist: fix some coexist bugs
1. Fix high beacon and broadcast packets loss ratio of WiFi to make
   MDNS test pass.
2. Improve stability of WiFi performance with a little
   sacrifice of throughput.
3. Improve BLE advertising and connection performance with dynamic
   priority. It sacrifices a little WiFi throughput, but achieves balance
   between WiFi and Bluetooth.
2019-09-30 11:49:16 +08:00
Roland Dobai
833822c10b Fix Kconfig issues discovered by upstream Kconfiglib 2019-09-23 16:10:57 +02:00
Michael (XIAO Xufeng)
3b39e60f97 driver: remove unused drivers for esp32s2beta 2019-09-04 10:53:25 +10:00
Hrishikesh Dhayagude
21165edf41 Bluetooth component refactoring 2019-06-30 16:39:00 +08:00
Hrishikesh Dhayagude
342f6a7829 Port NimBLE Host Stack on ESP-IDF 2019-06-25 09:03:58 +08:00
Island
fc3253163e component/ble_mesh: ESP BLE Mesh release
1. BLE Mesh Core

* Provisioning: Node Role
    * Advertising and GATT bearer
    * Authentication OOB

* Provisioning: Provisioner Role
    * Advertising and GATT bearer
    * Authentication OOB

* Networking
    * Relay
    * Segmentation and Reassembly
    * Key Refresh
    * IV Update

* Proxy Support

* Multiple Client Models Run Simultaneously
    * Support multiple client models send packets to different nodes simultaneously
    * No blocking between client model and server

* NVS Storage
    * Store Provisioning Data of BLE Mesh Nodes in Flash

2. BLE Mesh Applications

* BLE Mesh Node & Provisioner
    * Node Example
    * Provisioner Example
    * Node + Generic OnOff Client Example

* Fast Provisioning
    * Vendor Fast Prov Server Model
    * Vendor Fast Prov Client Model
    * Examples

* Wi-Fi & BLE Mesh Coexistence
    * Example

* BLE Mesh Console Commands
    * Example

3. BLE Mesh Models

* Foundation Models
    * Configuration Server Model
    * Configuration Client Model
    * Health Server Model
    * Health Client Model

* Generic Client Models
    * Generic OnOff Client
    * Generic Level Client
    * Generic Location Client
    * Generic Default Transition Timer Client
    * Generic Power OnOff Client
    * Generic Power Level Client
    * Generic Battery Client
    * Generic Property Client

* Generic Server Models
    * Generic OnOff Server (Example)

* Lighting Client Models
    * Light Lightness Client
    * Light CTL Client
    * Light HSL Client
    * Light xyL Client
    * Light LC Client

* Sensor Client Model
    * Sensor Client

* Time and Scenes Client Models
    * Time Client
    * Scene Client
    * Scheduler Client
2019-06-24 11:31:24 +08:00
baohongde
07fef85a23 components/bt: Separation of BT and BLE 2019-06-20 17:06:23 +08:00
baohongde
48e32113de component/bt: Allow configuration of default SCO_DATA_PATH in bluetooth controller 2019-06-04 16:31:21 +08:00
wangmengyang
ff2c583a0d component/bt: Add option to configure BLE SCA through menuconfig and use a fixed value of clock cycle to estimate sleep duration for external 32kHz oscillator 2019-05-28 19:56:26 +08:00
Roland Dobai
a1bddb923b Rename Kconfig options (components/bt) 2019-05-21 09:09:01 +02:00
Roland Dobai
0ae53691ba Rename Kconfig options (components/esp32) 2019-05-21 09:09:01 +02:00
zhiweijian
0ae4eb4f09 Component/bt: add ble link timeout config in menuconfig
- add ble link timeout config in menuconfig
- disable background connection when call gatts_open
2019-04-22 09:16:19 +00:00
zhiweijian
d5f15a45ca Component/bt: add BLE adv report flow control 2019-03-12 11:10:26 +08:00
zhiweijian
d71df18d92 Component/bt: fix iOS and win10 compatibility error for HID 2019-02-28 20:39:12 +08:00
Roland Dobai
80cb4a1a18 tools: Don't use backslashes in Kconfigs and ignore long lines to avoid errors
Closes https://github.com/espressif/esp-idf/issues/3012
2019-02-01 11:33:41 +01:00
Roland Dobai
37126d3451 Correct Kconfigs according to the coding style 2019-01-29 13:37:01 +01:00
Tian Hao
6c8a8664aa component/bt: add a option to make report adv data and scan response individually
Originally, when doing BLE active scan, Bluedroid will not report adv to
application layer until receive scan response. This option is used to
disable the behavior. When enable this option, Bluedroid will report
adv data or scan response to application layer immediately.
2019-01-24 14:30:02 +08:00
Jiang Jiang Jian
c4963fc329 Merge branch 'bugfix/btdm_miscellaneous_modifications' into 'master'
component/bt: some miscellaneous modifications for BLE

See merge request idf/esp-idf!4032
2019-01-02 14:04:44 +08:00
Tree
68626ed494 component/bt: some miscellaneous modifications for BLE 2018-12-26 20:36:33 +08:00
wangmengyang
74eae4b50e component/bt: add more information and description for bluetooth modem sleep
Add remark that "EVED" mode for bluetooth modem sleep is only used for internal test
2018-12-21 19:30:20 +08:00
Jiang Jiang Jian
65142bc59e Merge branch 'bugfix/btdm_configure_ssp_in_menuconfig' into 'master'
components/bt: Configure SSP in menuconfig and fix two bugs

See merge request idf/esp-idf!3892
2018-12-20 15:31:08 +08:00
baohongde
9c48528fcc components/bt: Configure SSP in menuconfig 2018-12-20 11:10:27 +08:00
wangmengyang
59f34461d7 component/bt: bugfix of bluetooth modem sleep not being able to work with Dynamic Frequency Scaling
1. start an esp_timer on entering sleep to acquire pm_lock before wake up from modem sleep
2. decrease the clock division of XTAL fed to bluetooth low power clock from 32us to 2us period to allow to work under 240MHz Max CPU frequency
3. decrease the minimum sleep duration threshold to allow shorter bluetooth modem sleep period, especially for BLE with short connection interval
4. reconfigure bluetooth baseband(BT-BB) settings after PHY/RF init upon waking up from modem sleep to avoid packet RX/TX performance degradation
2018-12-11 16:49:01 +08:00
yulong
0f3eb977cd component/bt: Added the ble full scan supported feature.
1. Add the full scan swith in the menuconfig;
2. Change the bt lib in order to support ble full scan
2018-11-30 20:48:42 +08:00
zhiweijian
9fb188a1d9 Component/bt: add gatts send service change indication API 2018-09-25 08:26:55 +00:00
wangmengyang
bca2e110fc component/bt: enable bluetooth modem sleep as default setting 2018-09-17 10:38:13 +08:00
zhiweijian
9103a04793 component/bt: add adv packet duplicate in scan duplicate 2018-09-11 02:31:11 +00:00
Angus Gratton
4eeed31a04 Merge branch 'feature/cmake' into 'master'
Merge experimental CMake support to master

See merge request idf/esp-idf!3024
2018-09-07 13:44:17 +08:00
baohongde
bd8b9960d5 component/bt: Add Legacy Pairing 2018-09-04 21:11:03 +08:00
Angus Gratton
a9c4ed7139 Merge branch 'master' into feature/cmake 2018-08-30 18:51:01 +08:00
Angus Gratton
ff2404a272 Merge branch 'master' into feature/cmake 2018-08-16 17:14:17 +10:00
Tian Hao
ab73e0ff13 tools: fix ci example build report reassign warnning 2018-08-16 11:12:22 +08:00
Tian Hao
ee787085f9 component/bt : decrease memory consumption by conn number
1. BLE only with 9(max) connection will decrease 3K DRAM
2. BR/EDR only with 7(max) connection will decrease 16K DRAM
3. Any of BLE or BR/EDR connection number decrease will also decrease DRAM consumption
4. Decrease one BLE connection will save about 1KB DRAM
5. Decrease one BR/EDR ACL connection will save about 1.2KB DRAM
6. Decrease one BR/EDR SCO/eSCO will save 2KB DRAM.
7. fix some definition and kconfig
8. remove 1.2k of vhci tx cache and make .bss & .data to heap about 1.4K
9. modify BT Reserved Memory size and modify example to support new bt kconfig
2018-08-14 02:29:17 +00:00
zhiweijian
658668b386 Component/bt: fix hci_hal_env.rx_q and xHciH4Queue blocking when scanning 2018-08-01 15:06:56 +08:00
baohongde
21af1d7339 component/bt: Add Secure Simple Pairing 2018-07-10 11:18:52 +08:00
zhiweijian
822dac5659 Component/bt: fix memory leak 2018-06-06 02:17:06 +00:00
zhiweijian
ae6b47a60a Component/bt: close BT sleep in default config 2018-06-04 11:17:27 +08:00
Angus Gratton
6b9784cc45 Merge branch 'master' into feature/cmake_update 2018-05-31 14:46:23 +10:00
Jiang Jiang Jian
affed9a235 Merge branch 'feature/a2dp-sink-source-runtime-selection' into 'master'
bt-a2dp: BT A2DP sink and source selection is now runtime

See merge request idf/esp-idf!2229
2018-05-22 22:21:39 +08:00
Amey Inamdar
ae8ed8dad8 bt-a2dp: BT A2DP sink and source selection is now runtime
Earlier they have to be selected at the compile time through sdkconfig.
A2DP sink and source application tested with this change.

Signed-off-by: Amey Inamdar <amey@espressif.com>
2018-05-21 14:02:49 +05:30
zhiweijian
340ad5c430 Component/bt: fix scan duplicate 2018-05-21 15:23:15 +08:00
wangmengyang
4c4e143a2f component/bt: implement HFP Hands Free Unit Role 2018-05-21 11:33:30 +08:00
wangmengyang
22e21b38f7 component/bt: implement bluetooth modem sleep mode, one mode for BLE only and another for dual mode bluetooth
1. provide options for bluetooth low power mode
2. provide two options for bluetooth low power clock: main XTAL and external 32kHz XTAL
3. provide function and callbacks to control bluetooth low power mode, including enable/disable sleep, software wakeup request, low power clock settings, check power state, etc
4. modify vhci API vhci_host_send_packet to use blocking mode
5. note that DFS and bluetooth modem sleep can not be used together currently.
2018-05-19 15:37:26 +08:00
Hrishikesh Dhayagude
da6cb6c741 components/bt: Improve the Bluetooth debug messaging scheme
As of now, when Bluetooth debugs are enabled, all the messages are
mapped to BT_PRINTF which is mapped to ESP_LOGE. Hence, make monitor
shows all logs in red color which might lead to missing the actual
errors

This patch maps the Bluetooth messages to appropriate ESP_LOG* messages
and improves readability.

Also, make the BT trace level be configurable in menuconfig, so that
each layer of bt trace can be enabled/disabled.

Finally, add debug log control for BTC, OSI, BLUFI and clear up
Bluetooth debug logs.

So, with this the method of enabling Bluetooth logs is as follows:
1. make menuconfig -> Component config -> Bluetooth -> Bluedroid Enable
-> BT DEBUG LOG LEVEL -> set trace level for every layer of BT

Signed-off-by: Hrishikesh Dhayagude <hrishi@espressif.com>
2018-05-14 20:45:05 +08:00