laokaiyao
8677216576
esp32h2: renaming esp32h2 to esp32h4
2022-11-08 17:05:33 +08:00
jiangguangming
8774db59f0
esp_rom: remove ESP_ROM_SUPPORT_MULTIPLE_UART
2022-10-14 14:06:40 +08:00
jiangguangming
4c3ce9f21d
esp_rom: fix esp32s3 rom ets_printf bug
2022-10-14 11:43:46 +08:00
wuzhenghui
1c820b0a6d
esp32c6: add bootloader support
2022-09-26 20:24:52 +08:00
songruojing
b3d8db3ae2
bootloader, esp_system: esp32c2 console uart to support 26MHz xtal
...
Gets the XTAL frequency from the RTC storage register, remove UART_CLK_FREQ_ROM macro from soc.h
2022-07-11 12:24:58 +08:00
Marius Vikhammer
ca3c056ac9
kconfig: replace deprecated options with new values
2022-03-15 16:28:53 +08:00
Michael (XIAO Xufeng)
395cd494f8
bootloader: fixed the issue custom_uart_gpio doesn't take effect
2022-03-01 17:54:34 +08:00
laokaiyao
cf049e15ed
esp8684: rename target to esp32c2
2022-01-19 11:08:57 +08:00
Cao Sen Miao
bf6fa70812
ESP8684: update bootloader, bootloader_support, esp_rom
2021-11-06 17:33:44 +08:00
Omar Chebib
779e7400b0
uart: uart_set_pin function will now use IOMUX whenever possible
...
By using IOMUX instead of GPIO Matrix for UART, it is now possible
on ESP32 boards to use the UART as a wake up source even if it is
not used as a console.
For other boards where this issue was not present, using IOMUX has
the advantage to be faster than using GPIO matrix, so a highest
baudrate can be used
2021-08-04 12:48:30 +08:00
Shu Chen
c0056813f2
esp32h2: add bootloader support
2021-07-01 19:53:11 +08:00
Cao Sen Miao
f2fe0847d5
usb_serial_jtag: add initial support for S3 (including flashing, monitoring, writing, and reading) but console is not avaliable now
2021-06-18 12:42:41 +08:00
Jan Brudný
dffe49f305
bootloader: update copyright notice
2021-06-02 14:22:09 +02:00
Cao Sen Miao
8c5819dccb
usb_serial_jtag: fix the bug that cannot write with usb_jtag
2021-05-13 13:40:01 +08:00
Jeroen Domburg
2c75f63f89
* ets_delay_us(1) has too much overhead; change logic
...
* Fix MR comments
2021-04-28 16:38:24 +08:00
Omar Chebib
cd79f3907d
gpio: Disable USB JTAG when setting pins 18 and 19 as GPIOs on ESP32C3
...
When `DIS_USB_JTAG` eFuse is NOT burned (`False`), it is not possible
to set pins 18 and 19 as GPIOs. This commit solves this by manually
disabling USB JTAG when using pins 18 or 19.
The functions shall use `gpio_hal_iomux_func_sel` instead of
`PIN_FUNC_SELELECT`.
2021-04-08 14:01:18 +08:00
Marius Vikhammer
4ff8c7ae98
esp_rom/esp_system: Add flag for ROM multiple UART output, esp32c3 console
...
From internal commit 6d894813
2020-12-24 14:18:01 +11:00
morris
3f287800eb
bootloader_support: added esp32-c3 support
2020-12-11 11:45:10 +08:00
morris
6225932201
bootloader_support: add esp32-s3 initial support
2020-09-22 15:15:03 +08:00
morris
2917651478
esp_rom: extract common ets apis into esp_rom_sys.h
2020-07-27 15:27:01 +08:00
morris
345606e7f3
esp_rom: extract common uart apis into esp_rom_uart.h
2020-07-17 16:00:59 +08:00
morris
a4d0033c03
esp_rom: extract common GPIO apis into esp_rom_gpio.h
2020-07-07 11:40:19 +08:00
Ivan Grokhotkov
5ee75165f2
esp_common: add "USB CDC" option for console output
2020-06-26 15:38:49 +02:00