Commit Graph

105 Commits

Author SHA1 Message Date
Chen Yi Qun
b9a0d509a2 UART: Add return in uart_wait_tx_done
uart_wait_tx_done quit due to timeout but without return ESP_ERR_TIMEOUT.
2020-09-08 02:45:14 +00:00
Michael (XIAO Xufeng)
cef10fdfef Merge branch 'feature/uart_error_string_mod' into 'master'
uart: Improve error log description in UART rx buffer size

Closes IDFGH-3579

See merge request espressif/esp-idf!9466
2020-07-27 16:35:20 +08:00
morris
a4d0033c03 esp_rom: extract common GPIO apis into esp_rom_gpio.h 2020-07-07 11:40:19 +08:00
joncmaloney
15da32ebbb Improve error log description UART rx buffer size.
The under the error condition of rx buffer size is <=128 an error log is printed that reads uart rx buffer length error(>128). Propose an update to better describe the error condition as uart rx buffer length error(<=128).

Signed-off-by: Wu Bo Wen <wubowen@espressif.com>

Merges https://github.com/espressif/esp-idf/pull/5523
2020-07-03 11:27:33 +08:00
houwenxiang
61e3259f22 Driver(UART): fix uart_read_byte and uart_write_byte different in buffer type issue. 2020-06-10 16:22:06 +08:00
houwenxiang
46713a5275 driver(uart): fix uart module reset issue
On ESP32, due to fifo reset issue, UART2 will work incorrectly if reset the fifo of UART1(TX fifo and RX fifo). The software can workaround the RX fifo reset issue,

        while the TX fifo reset issue can not. When UART2 is used and UART1 is used as the log output port, a software reset can reproduce this issue. So we should reset the UART memory

        before the software reset to solve this problem.
2020-06-01 11:01:26 +08:00
Alex Lisitsyn
3abdd2207d freemodbus: fix long buffer failure
check master read write functions with array of registers)
fix master serial processing code and modbus controller to work with register array
modbus_master: add reading and writing of test value array (58 registers) to check failure is gone
remove parameter temporary buffer from modbus controller to allow more than 24 byte writes
driver: fix issue with TOUT feature
driver: fix uart_rx_timeout issue
driver: fix issue with rxfifo_tout_int_raw not triggered when received fifo_len = 120 byte and all bytes read out of fifo as result of rxfifo_full_int_raw
driver: add function uart_internal_set_always_rx_timeout() to always handle tout interrupt
examples: call uart_internal_set_always_rx_timeout() to handle tout interrupt correctly
examples: update examples to use tout feature
driver: reflect changes of uart_set_always_rx_timeout() function, change uart.c
driver: change conditions to trigger workaround for tout feature in uart.c
driver: change uart_set_always_rx_timeout()
freemodbus: fix tabs, remove commented code
driver: remove uart_ll_is_rx_idle()
2020-03-30 22:05:48 +08:00
Alex Lisitsyn
16e6e63694 driver: fix driver set rx timeout feature of uart
tout_thr - move calculation and masking into hal layer update driver and uart_ll (add uart_ll_set_rx_tout)
move tout calculation into uart_ll
move calculation of time out in bit time for esp32s2 into low level uart_ll.h file
move uart_hal_get_symb_len() into hal
update set_rx_timeout() to warn user about incorrect value
update HAL, LL 1
fix uart_xx_set_rx_tout() to convert symbol time into bit time
update param description
update tout calculation in LL
update uart_hal_get_max_rx_timeout_thrd() and uart_ll_get_max_rx_timeout_thrd()
2020-03-27 16:20:21 +08:00
houwenxiang
886745326e driver(UART): fix uart driver missing txfifo reset issue.
closes https://github.com/espressif/esp-idf/issues/4908
2020-03-25 01:48:46 +08:00
morris
e30cd361a8 global: rename esp32s2beta to esp32s2 2020-01-22 12:14:38 +08:00
Roland Dobai
a9c4dab4d3 VFS: Check in select() if the UART driver is installed or not
Closes https://github.com/espressif/esp-idf/issues/4627
2020-01-14 13:52:27 +01:00
kewal shah
eec8212237 add simplified API to set UART threshold values for RX FIFO full and TX FIFO empty 2019-12-16 20:26:04 +00:00
houwenxiang
e4230d11ca bugfix(UART): fix uart driver spinlock misused bug
1. fix uart driver spinlock misused bug
    2. add uart driver ut test case
    3. undo the change in light_sleep_example_main.c
2019-12-03 16:06:31 +08:00
houwenxiang
f27ae9b0e2 feature: Add uart hal support. 2019-11-26 20:01:50 +08:00
Mahavir Jain
ecf09382da uart: critical section compliant API in ISR context 2019-11-15 15:58:31 +05:30
David Cermak
2e0d6d0e6a uart: make uart_driver_install() more backward compatible, so if the interrupt handler configured to be in IRAM and not flagged in intr_alloc_flags argument, then the flag is gracefully updated rather then error return 2019-11-11 15:27:09 +00:00
Roland Dobai
2a0285fdb4 Fix VFS UART unit tests for esp32s2beta 2019-10-30 13:45:12 +00:00
Angus Gratton
496ede9bcd Merge branch 'master' into feature/esp32s2beta_merge 2019-10-15 14:59:27 +11:00
suda-morris
f94711c316 uart: add option to put ISR in IRAM 2019-10-02 16:43:02 +00:00
Angus Gratton
438d513a95 Merge branch 'master' into feature/esp32s2beta_merge 2019-09-16 16:18:48 +10:00
Angus Gratton
0c88ef3232 driver: Fix UART interrupt handle read bug 2019-09-04 10:53:25 +10:00
Angus Gratton
8d8d4a57e1 Merge branch 'bugfix/reset_periph_modules' into 'master'
driver: Add a reset before enabling if a module is off

Closes IDF-188

See merge request espressif/esp-idf!4843
2019-08-26 16:38:23 +08:00
Angus Gratton
6990a7cd54 Merge branch 'master' into feature/esp32s2beta_update 2019-08-19 15:03:43 +10:00
suda-morris
b1497f2187 exclude rom headers in examples
1. avoid including rom headers directly in examples
2. add common API interface for CRC calculation in esp_common component
2019-08-13 11:10:22 +08:00
Konstantin Kondrashov
c082d13075 uart/driver: Add module reset before enabling
This commit prevents infinite restarts caused due to an interrupt flag
was left uncleared.

Closes: https://github.com/espressif/esp-idf/issues/1981

Closes: IDF-188
2019-08-09 17:09:56 +08:00
Angus Gratton
04ae56806c Merge branch 'master' into feature/esp32s2beta_update 2019-08-08 15:26:58 +10:00
Angus Gratton
24d26fccde Merge branch 'master' into feature/esp32s2beta_update 2019-08-08 13:44:24 +10:00
Anton Maklakov
afbaf74007 tools: Mass fixing of empty prototypes (for -Wstrict-prototypes) 2019-08-01 16:28:56 +07:00
chenjianqiang
e43513b610 bugfix(uart): uniform AT_CMD char configuration 2019-07-18 19:24:13 +08:00
chenjianqiang
91ae40e2ff uart: multichip support 2019-07-18 15:57:00 +08:00
chenjianqiang
4cc962353c feat(uart): update uart driver for esp32s2beta 2019-07-18 15:57:00 +08:00
kooho
09a63cca51 bugfix(UART): fixed two UART issues:
1. uart_wait_tx_done works incorrect when sending a byte of data.
2. uart_set_rx_timeout sets an incorrect rx timeout value when ref_tick is enabled

closes https://github.com/espressif/esp-idf/issues/3631
2019-07-08 12:27:14 +08:00
Xia Xiaotian
99ef587a05 run WiFi on ESP32SBETA 2019-06-28 11:34:49 +08:00
chenjianqiang
cf2ba210ef uart: multichip support 2019-06-20 11:32:22 +08:00
suda-morris
84b2f9f14d build and link hello-world for esp32s2beta 2019-06-11 13:07:37 +08:00
Angus Gratton
2331597ed2 Merge branch 'bugfix/ticks_to_wait_for_uart_and_i2c' into 'master'
driver: Fix ticks_to_wait for uart and i2c

Closes IDFGH-964

See merge request idf/esp-idf!5021
2019-06-11 08:41:44 +08:00
Konstantin Kondrashov
355f209dba uart: Fix ticks_to_wait when 0 or expired
Closes: https://github.com/espressif/esp-idf/issues/3301

Closes: IDFGH-964
2019-06-04 11:50:54 +08:00
Konstantin Kondrashov
399d2d2605 all: Using xxx_periph.h
Using xxx_periph.h in whole IDF instead of xxx_reg.h, xxx_struct.h, xxx_channel.h ... .

Cleaned up header files from unnecessary headers (releated to soc/... headers).
2019-06-03 14:15:08 +08:00
Roland Dobai
0ae53691ba Rename Kconfig options (components/esp32) 2019-05-21 09:09:01 +02:00
morris
f5b03c9ea3 misc adjustment of esp32 component 2019-04-03 19:57:46 +08:00
morris
956c25dedd move esp32 chip specific includes to esp32/xxx.h 2019-03-18 17:14:05 +08:00
Mahavir Jain
e9652e8ef3 uart: use correct critical section API (portENTER_CRITICAL_ISR) from ISR context 2019-02-27 08:36:47 +00:00
kooho
a9c1124763 driver(uart): fixed uart read error bug when using dual core.
closes https://github.com/espressif/esp-idf/issues/2204
2018-11-27 20:53:26 +08:00
Ivan Grokhotkov
002d913ab6 uart: add function to set light sleep wakeup threshold 2018-09-06 15:40:46 +08:00
kooho
2d0af81ccf driver(uart): Fixed uart tx_empty interrupt wdt timeout bug. 2018-08-05 06:34:34 +00:00
Roland Dobai
0efb4a11ec Correct source code encoding 2018-07-19 14:00:44 +02:00
hou wen xiang
e2b9b70800 driver(uart): Fix uart time_out bug when using ref_tick 2018-07-16 16:56:14 +08:00
Alex Lisitsyn
a9fca0c775 driver: add rs485 half duplex interface support to uart driver (fix after review)
An existing UART driver does not support RS485 half duplex mode.
This task adds this functionality to ESP_IDF UART driver.
driver/uart.c/h: updated to add support of RS485 half duplex mode
examples/peripherals/uart_echo_rs485/main/rs485_example.c: added test example
components/driver/test/test_uart.c: added test of RS485 half duplex mode
docs/en/api-reference/peripherals/uart.rst: updated documentation
test_uart.c: suppress GCC warnings about discarded const qualifiers
uart.rst: remove sphinx warning - "Duplicate explicit target name"
simple change in uart.h file
update (test_uart.c) after rebase from master
update uart.rst, uart.c, rs485_example.c
Update example description in file Readme.md
update uart.c/h, uart.rst, test_uart.c according to review results
update uart.h (uart_set_rx_timeout() description
test_uart.c remove ignore tag
uart.c/h: fix param errors
test_uart.c: Remove GCC warning supress
uart.rst: fix the notes
rs485_example.c: fix output
uart.c: remove reset using UART_RXFIFO_RST from driver.
readme.md: Update example description

The tests are completed using RS485 adapters hardware connected to two ESP32 WROVER KITs.

TW#13812
Closes https://github.com/espressif/esp-idf/pull/667
Closes https://github.com/espressif/esp-idf/pull/1006
2018-07-02 15:24:58 +02:00
Alex Lisitsyn
ef5dc73f6f driver: add rs485 half duplex interface support to uart driver (update after review)
An existing UART driver does not support RS485 half duplex mode.
This task adds this functionality to ESP_IDF UART driver.
driver/uart.c/h: updated to add support of RS485 half duplex mode
examples/peripherals/uart_echo_rs485/main/rs485_example.c: added test example
components/driver/test/test_uart.c: added test of RS485 half duplex mode
docs/en/api-reference/peripherals/uart.rst: updated documentation
test_uart.c: suppress GCC warnings about discarded const qualifiers
uart.rst: remove sphinx warning - "Duplicate explicit target name"
simple change in uart.h file
update (test_uart.c) after rebase from master
update uart.rst, uart.c, rs485_example.c
Update example description in file Readme.md
update uart.c/h, uart.rst, test_uart.c according to review results
update uart.h (uart_set_rx_timeout() description
test_uart.c remove ignore tag
uart.c/h: fix param errors
test_uart.c: Remove GCC warning supress
uart.rst: fix the notes
rs485_example.c: fix output

The tests are completed using RS485 adapters hardware connected to two ESP32 WROVER KITs.

TW#13812
Closes https://github.com/espressif/esp-idf/pull/667
Closes https://github.com/espressif/esp-idf/pull/1006
2018-07-02 15:24:58 +02:00
Alex Lisitsyn
51e9cf6848 driver: add rs485 half duplex interface support to uart driver (update after review)
An existing UART driver does not support RS485 half duplex mode.
This task adds this functionality to ESP_IDF UART driver.
driver/uart.c/h: updated to add support of RS485 half duplex mode
examples/peripherals/uart_echo_rs485/main/rs485_example.c: added test example
components/driver/test/test_uart.c: added test of RS485 half duplex mode
docs/en/api-reference/peripherals/uart.rst: updated documentation
test_uart.c: suppress GCC warnings about discarded const qualifiers
uart.rst: remove sphinx warning - "Duplicate explicit target name"
simple change in uart.h file
update (test_uart.c) after rebase from master
update uart.rst, uart.c, rs485_example.c
Update example description in file Readme.md
update uart.c/h, uart.rst, test_uart.c according to review results

The tests are completed using RS485 adapters hardware connected to two ESP32 WROVER KITs.

TW#13812
Closes https://github.com/espressif/esp-idf/pull/667
Closes https://github.com/espressif/esp-idf/pull/1006
2018-07-02 15:24:58 +02:00