Commit Graph

39 Commits

Author SHA1 Message Date
Roland Dobai
766aa57084 Build & config: Remove leftover files from the unsupported "make" build system 2021-11-11 15:32:36 +01:00
Cao Sen Miao
5add6593f4 ESP8684: Add esp_gdbstub, mbedtls, esp_timer 2021-11-06 17:33:45 +08:00
Dmitry
1457c42f6f bugfix/esp-gdbstrub: add missing function for esp32c3/esp32h2. 2021-10-25 10:30:50 +03:00
Omar Chebib
92cf321677 freertos: add kconfig options for task snapshot functions
Task snapshots is required by other modules that don't use gdbstub
or core dump. Add a Kconfig option to manage these possibilities.
2021-09-01 15:13:48 +08:00
Omar Chebib
83c9e1b223 freertos: take tasks snapshot out of tasks.c source code 2021-08-16 10:29:36 +08:00
Dmitry
883617d51f Change call0 to callx0 because on Esp32S3 it make error. 2021-07-19 11:19:54 +03:00
Shu Chen
e9a51e410a esp32h2: add stub code for efuse/esp_gdbstub/esp_phy
Only stub code for these components:
 * efuse
 * esp_gdbstub
 * esp_phy
2021-07-01 19:53:11 +08:00
Dmitry
00a7ecb5a3 Code cleanup. Bugfix after rebase with master. Formating. 2021-05-13 15:03:40 +03:00
Dmitry
f8197c2446 Fix problem with panic handler with gdbstubs. 2021-05-11 16:09:32 +03:00
Dmitry
7bb91f912c gdbstub component 2021-05-11 15:55:39 +03:00
Jeroen Domburg
2c75f63f89 * ets_delay_us(1) has too much overhead; change logic
* Fix MR comments
2021-04-28 16:38:24 +08:00
Jakob Hasse
4c0cf6bf62 gdbstub: C3 - protection for UART register region
* reading the UART peripheral registers disturbs
  gdbstub because it communicates via UART.
  Hence, we protect it.

Closes IDF-2533
2021-01-11 17:09:42 +08:00
Marius Vikhammer
68608f804c esp32c3: Misc fixes needed to build & run 2020-12-31 15:20:05 +11:00
Jakob Hasse
a7683fc256 [system/tools]: gdbstub support C3
Closes IDF-1757
Closes IDF-2489
2020-12-31 09:27:00 +11:00
Marius Vikhammer
da947d736f Docs: Add C3 support to build_docs 2020-12-28 12:25:03 +08:00
Angus Gratton
420aef1ffe Updates for riscv support
* Target components pull in xtensa component directly
* Use CPU HAL where applicable
* Remove unnecessary xtensa headers
* Compilation changes necessary to support non-xtensa gcc types (ie int32_t/uint32_t is no
  longer signed/unsigned int).

Changes come from internal branch commit a6723fc
2020-11-13 07:49:11 +11:00
Angus Gratton
66fb5a29bb Whitespace: Automated whitespace fixes (large commit)
Apply the pre-commit hook whitespace fixes to all files in the repo.

(Line endings, blank lines at end of file, trailing whitespace)
2020-11-11 07:36:35 +00:00
Ivan Grokhotkov
51d86081b8 gdbstub: fix thread list generation
This commit fixes an issue with gdbstub, where it would list threads
with TIDs 1 to N in qfThreadInfo/qsThreadInfo responses, and then
would tell GDB that the current TID is 0 in the qC response. This
caused an assertion failure in GDB, because it couldn't find the
thread structure corresponding to TID 0:

src/gdb/gdb/thread.c:93: internal-error: thread_info* inferior_thread(): Assertion `tp' failed.

The issue was caused by the logic of qfThreadInfo/qsThreadInfo.
If the "paniced" task index was 1, the code would report it in the
response to qfThreadInfo, and then mistakenly skip task with index 0
in qsThreadInfo, due to the use of pre-increment instead of a
post-increment.

With that issue fixed, GDB assertion doesn't happen anymore. However
the code contained a deeper problem, which manifested itself in the
fact that GDB would incorrectly show task index 0 as the current task,
after the above fix.

Previous version of the code assumed that when GDB requests the thread
list, it uses the first thread returned by the target as the "default"
thread, and subsequently shows the user that the program is stopped
in that thread. This assumption was incorrect. In fact, after
connecting to a remote target, GDB obtains information about the
"default" or "current" thread from two sources:
1. the 'thread' special register indicated in the status response
   ($T00thread;00000001#ee)
2. if the target has only sent the plain stop response ($T00#ee), GDB
   would ask for the current thread using a qC packet.
With that in mind, it is not necessary to report the paniced task as
the first task in qfThreadInfo response. We can simply returns the
tasks in their natural order, and then indicate the current task in
the qS packet response.

However even that change does not fully resolve the issues with task
list. The previous version of this code also incorrectly interpreted
the meaning of GDB TIDs -1 and 0. When GDB sends an "Hg0" command
early in the connection process, it doesn't expect the server to set
task 0 as the current task, as the code assumed. Rather, it tells the
server to "set any (arbitrary) task as the current one", and the most
logical thing to do for the server that is already in "stopped" state
is to keep the current task selection.

Since TID 0 has a special meaning in GDB remote protocol, gdbstub code
is now modified to map task indices (which start from 0) to GDB TIDs.
GDB TIDs are arbitrary, and for simplicity we keep the same order and
start counting them from 1.

The summary of all the above changes is:

1. Use "task index + 1" as the TID reported to GDB
2. Report the tasks in natural order; don't complicate the code to
   make the paniced task first in the list.
3. Centralize modification of 'current_task_index' and 'regfile'
   in the new 'set_active_task' function, to improve encapsulation.
2020-10-13 18:09:22 +02:00
morris
61f89b97c6 bringup esp32-s3 on FPGA 2020-09-22 15:15:03 +08:00
Ivan Grokhotkov
8e6d450a8c Revert "Merge branch 'feature/gdb_stub_task_state' into 'master'"
This reverts commit c41a0c1907, reversing
changes made to 5c1d317766.
2020-07-09 17:16:47 +02:00
Sachin Parekh
c0a33487b1 gdbstub_xtensa.c: Replace with cpu_ll_pc_to_ptr macro
Signed-off-by: Sachin Parekh <sachin.parekh@espressif.com>
2020-05-08 18:35:48 +05:30
Sachin Parekh
46d914ff45 gdb: Modify PC in case of invalid PC
Signed-off-by: Sachin Parekh <sachin.parekh@espressif.com>
2020-05-08 18:34:52 +05:30
Felipe Neves
c78ddb770a docs: added information of task states on fatal errors documentation. 2020-04-27 14:41:55 +00:00
Felipe Neves
c296d01737 gdbstub: added cpu id of running tasks to the output 2020-04-27 14:41:55 +00:00
Felipe Neves
5279e68146 gdbstub: improve format of info thread command output
gdbstub: simplify the state handling on extra thread info
2020-04-27 14:41:55 +00:00
Felipe Neves
9a54a0af13 gdbstub: added task state information on qThreadExtraInfo command 2020-04-27 14:41:55 +00:00
Renz Christian Bagaporo
c9a51bfbb2 soc: create abstraction for cpu related operations 2020-02-27 07:14:19 +05:00
morris
e30cd361a8 global: rename esp32s2beta to esp32s2 2020-01-22 12:14:38 +08:00
Angus Gratton
438d513a95 Merge branch 'master' into feature/esp32s2beta_merge 2019-09-16 16:18:48 +10:00
Alex Lisitsyn
7ff9538c48 espcoredump: fix issue with spi_flash access
spi_flash has been updated and its functions work from flash by default instead of IRAM that cause issue
add Kconfig value into espcoredump to enable spi_flash legacy mode (CONFIG_SPI_FLASH_USE_LEGACY_IMPL) when core dump is selected
fix spi_flash issues to work correctly with legacy mode when CONFIG_SPI_FLASH_USE_LEGACY_IMPL is used
2019-09-06 15:37:55 +08:00
Angus Gratton
6990a7cd54 Merge branch 'master' into feature/esp32s2beta_update 2019-08-19 15:03:43 +10:00
Angus Gratton
04ae56806c Merge branch 'master' into feature/esp32s2beta_update 2019-08-08 15:26:58 +10:00
Angus Gratton
24d26fccde Merge branch 'master' into feature/esp32s2beta_update 2019-08-08 13:44:24 +10:00
Mahavir Jain
5203a15439 esp32_gdbstub: fix build error with esp32-2019r1 toolchain
Fixes https://github.com/espressif/esp-idf/issues/3866
2019-08-07 11:56:13 +05:30
Anton Maklakov
afbaf74007 tools: Mass fixing of empty prototypes (for -Wstrict-prototypes) 2019-08-01 16:28:56 +07:00
Ivan Grokhotkov
d742bc85a5 gdbstub: fix CONFIG_ESP_CONSOLE_UART_NUM option name 2019-07-18 09:33:40 +02:00
Ivan Grokhotkov
f9f13a86a7 esp32s2beta: add gdbstub support 2019-07-17 16:27:11 +02:00
Ivan Grokhotkov
7d21ece78b gdbstub: move to a separate component, support multiple targets 2019-07-17 16:01:03 +02:00
Ivan Grokhotkov
66e0b2f9df gdbstub: move to a separate component, support multiple targets 2019-07-02 11:06:25 +02:00