morris
3bb601cee7
Merge branch 'feature/mcpwm_trigger_driver_v5.0' into 'release/v5.0'
...
feature(MCPWM): Add MCPWM trigger driver (v5.0)
See merge request espressif/esp-idf!26788
2023-11-23 14:33:20 +08:00
Jiang Jiang Jian
5f497153f7
Merge branch 'bugfix/rmt_stop_issue_v5.0' into 'release/v5.0'
...
fix(rmt): a disabled channel may pick up a pending transaction (v5.0)
See merge request espressif/esp-idf!26780
2023-11-23 14:27:25 +08:00
Song Ruo Jing
c0a1d27858
fix(ledc): fix ledc driver 100% duty cycle configuration
...
Update ledc duty cycle value range in doxygen.
Fix duty configuration error at 100% duty cycle for ESP32.
Improve LEDC API doxygen.
Closes https://github.com/espressif/esp-idf/pull/11516
Closes https://github.com/espressif/esp-idf/issues/12593
Closes https://github.com/espressif/esp-idf/issues/12083
2023-11-22 03:12:38 +00:00
Chen Jichang
01c5d8d72e
feature(MCPWM): Add MCPWM trigger driver and test
...
Each MCPWM operator has two Trigger (named T0 and T1), and they can be
routed to GPIO fault signal or timer sync event.Generator can be set up
to perform different action on Trigger event.
This commit add a trigger driver and a test for the driver.
fix(mcpwm): fault trigger test forget connect timer and operator
2023-11-09 21:52:37 +08:00
morris
6a7e250442
feat(rmt): support calling rmt_receive in ISR callback
2023-11-08 15:03:44 +08:00
morris
da2399a2c5
fix(rmt): a disabled channel may pick up a pending transaction
...
because in the trans_done interrupt, the driver didn't check the channel FSM
2023-11-03 02:40:56 +00:00
morris
0187f3b4e3
feat(mcpwm): support update timer period dynamically
...
Implement the requirement asked in
https://www.esp32.com/viewtopic.php?f=13&t=35919
2023-10-24 10:08:29 +08:00
morris
8093ef885e
Merge branch 'fix/spi_polling_api_buslock_logic_v5.0' into 'release/v5.0'
...
fix(spi_master): polling_transmit forgot release bus lock when alloc DMA buffer failed (v5.0)
See merge request espressif/esp-idf!25577
2023-10-08 11:41:50 +08:00
morris
711477d354
Merge branch 'feature/specify_rmt_intr_priority_v5.0' into 'release/v5.0'
...
feat(rmt): specify interrupt priority (v5.0)
See merge request espressif/esp-idf!25719
2023-09-19 11:49:18 +08:00
morris
2bec2de36e
Merge branch 'feature/mcpwm_interrupt_priority_v5.0' into 'release/v5.0'
...
feat(MCPWM): Support set interrupt priority(v5.0)
See merge request espressif/esp-idf!25522
2023-09-19 10:41:58 +08:00
morris
d86397aca4
Merge branch 'feature/pcnt_interrupt_priority_v5.0' into 'release/v5.0'
...
feat(pcnt): support set interrupt priority(v5.0)
See merge request espressif/esp-idf!25520
2023-09-19 10:27:28 +08:00
morris
d6df3b7758
Merge branch 'feature/add_mcpwm_carrier_clk_source_v5.0' into 'release/v5.0'
...
feat(MCPWM): Add mcpwm carrier clk source(v5.0)
See merge request espressif/esp-idf!25523
2023-09-19 10:24:25 +08:00
Planck (Lu Zeyu)
f089f0d83b
feat(rmt): specify interrupt priority
2023-09-18 03:02:49 +00:00
wanlei
bf1a67362e
fix(spi_master): polling_transmit forgot release bus lock when alloc DMA buffer failed
...
Close https://github.com/espressif/esp-idf/issues/11845
2023-09-01 17:30:26 +08:00
Chen Jichang
03ec7a0c5d
feat(pcnt): support set interrupt priority(v5.0)
2023-08-29 07:48:30 +00:00
Chen Jichang
615222f1c2
feat(MCPWM): Support set interrupt priority(v5.0)
2023-08-24 19:56:42 +08:00
Chen Jichang
2a88fb9e81
feat(MCPWM): Add mcpwm carrier clk source
...
The MCPWM carrier is part of the operator and can work independently
without the MCPWM timer being enabled. This commit add the MCPWM
carrier clk source.
2023-08-24 11:45:28 +08:00
Ivan Grokhotkov
f82d97216a
sdmmc: keep clock enabled for the duration of ACMD41
...
SD specification requires that card clock is not disabled until the
card is idle, following ACMD41 command.
2023-08-24 02:16:37 +00:00
morris
f5154364ac
feat(gptimer): support set interrupt priority
...
Related forum post: https://esp32.com/viewtopic.php?f=13&t=34959
2023-08-04 12:55:16 +08:00
morris
a87a04992e
feat(mcpwm): support open drain output for generator IO
...
Closes https://github.com/espressif/esp-idf/issues/11877
2023-07-19 16:13:12 +08:00
Anne Brondijk
bf5c09aacd
feat(mcpwm): Allow for pull up/down to be configurable on generators
2023-07-19 16:13:11 +08:00
Armando
a3ed59744b
spi: added an API to get max transaction length and use in spi lcd driver
2023-07-10 07:17:00 +00:00
morris
378fa3b792
Merge branch 'doc/update_mcpwm_deadtime_v5.0' into 'release/v5.0'
...
MCPWM: don't allow to apply the same delay module to multiple generators (v5.0)
See merge request espressif/esp-idf!23664
2023-05-15 12:25:13 +08:00
morris
cea9f80870
Merge branch 'bugfix/mcpwm_bldc_example_v5.0' into 'release/v5.0'
...
mcpwm: test generator force level with dead time module (v5.0)
See merge request espressif/esp-idf!23715
2023-05-14 14:13:02 +08:00
morris
24a2a98707
Merge branch 'bugfix/rmt_encode_state_init_v5.0' into 'release/v5.0'
...
rmt: define RMT_ENCODING_RESET in rmt_encode_state_t (v5.0)
See merge request espressif/esp-idf!23240
2023-05-12 15:53:22 +08:00
morris
a69a6775c9
mcpwm: fix bldc example force output level inverted
...
set_force_level can only set the generator level before the deadtime module.
if the deadtime module enables the inverter, then the real output level is inverted accordingly
2023-05-12 14:40:19 +08:00
morris
2b483c98c4
Merge branch 'bugfix/fix_several_bugs_in_i2s_v5.0' into 'release/v5.0'
...
i2s: fix several bugs in std and tdm mode (v5.0)
See merge request espressif/esp-idf!23670
2023-05-12 11:03:37 +08:00
morris
0542983ed8
rmt: define RMT_ENCODING_RESET in rmt_encode_state_t
...
Closes https://github.com/espressif/esp-idf/issues/11200
2023-05-11 02:28:31 +00:00
laokaiyao
f0c13fc7a8
i2s_std: fixed mclk check for 24-bit data and enable left alignment as default
2023-05-10 12:25:35 +08:00
morris
49c83f112d
mcpwm: can't apply the same delay module to multiple generators
...
This is a hardware limitation, one delay module can only be used by one generator at one time.
Closes https://github.com/espressif/esp-idf/issues/11327
2023-05-10 10:10:16 +08:00
morris
5d11967f2e
rmt: calarify the meaning of mem_block_symbols in DMA and non-DMA mode
2023-03-31 09:59:32 +08:00
morris
e06bea0445
rmt: use gpio_num_t to define gpio number
2023-03-30 15:52:08 +08:00
Michael (XIAO Xufeng)
76c8f09856
Merge branch 'bugfix/usb_serial_driver_block_v5.0' into 'release/v5.0'
...
usb_serial_jtag: Fix bug of blocking TX xfer when using driver (backport v5.0)
See merge request espressif/esp-idf!22830
2023-03-23 16:58:36 +08:00
laokaiyao
ec55f7fe6e
i2s_pdm: fix tx frequency limitation
...
Closes: https://github.com/espressif/esp-idf/issues/10420
2023-03-20 19:22:40 +08:00
laokaiyao
b02d50e33b
i2s: fix some typos
2023-03-20 14:51:07 +08:00
Chip Weinberger
6f0746734f
[USB Serial/JTAG Driver] use time-limited blocking for TX
2023-03-20 14:07:41 +08:00
Michael (XIAO Xufeng)
55e040b54b
Merge branch 'bugfix/wakeup_io_hold_unhold_in_sleep_v5.0' into 'release/v5.0'
...
gpio: Fix deep sleep wakeup IOs unable to unhold after wakeup (v5.0)
See merge request espressif/esp-idf!22665
2023-03-20 12:49:56 +08:00
Song Ruo Jing
27f9ee66d5
gpio: Fix IO hold function related problems
...
1. Fix deep sleep wakeup IOs can not be unhold issue
2. Correct hold related APIs' description
3. Fix gpio_force_hold_all API
docs: Add GPIO wakeup source to sleep_modes doc for ESP32C3 and C2
2023-03-17 14:44:29 +08:00
morris
c24222dcde
gptimer: fix race condition between start and stop
...
Added state transition in gptimer_start/stop functions.
So that it's not possible to make a stopped timer continue to run
because of race condition.
2023-03-11 11:42:09 +08:00
Jiang Jiang Jian
4abb6efb36
Merge branch 'bugfix/fix_gpio_wakeup_related_issues_in_ssc_sleep_test_backport_v5.0' into 'release/v5.0'
...
sleep: fix gpio wakeup related issues(backport v5.0)
See merge request espressif/esp-idf!22332
2023-02-27 15:12:13 +08:00
morris
3f68b61f3e
Merge branch 'feature/mcpwm_non_varg_version_api_v5.0' into 'release/v5.0'
...
mcpwm: support non-vararg version of generator functions (v5.0)
See merge request espressif/esp-idf!21951
2023-02-18 15:04:17 +08:00
jingli
50feb8f75b
soc_caps: remove SOC_GPIO_SUPPORT_SLP_SWITCH
...
all esp chips support this feature
2023-02-09 17:29:40 +08:00
morris
5aa55ffc34
mcpwm: support not reset GPIO config at exit
...
By default, the driver will reset the GPIO used by the MCPWM capture
channel at exit. But in some special use cases, the same gpio may also
be used by another device, which shares the same gpio configuration,
resetting the gpio is not expected.
Closes https://github.com/espressif/esp-idf/issues/10327
2023-01-16 11:22:58 +08:00
morris
ae7c8de4a7
mcpwm: support non-varg version of generator functions
...
Closes https://github.com/espressif/esp-idf/issues/10449
2023-01-09 15:09:40 +08:00
Ivan Grokhotkov
20d4335d60
Merge branch 'fix/sdspi_no_cs_v5.0' into 'release/v5.0'
...
sdspi: Allow CS line to be set to GPIO_NUM_NC (-1) (v5.0)
See merge request espressif/esp-idf!20915
2022-12-21 16:37:25 +08:00
morris
a3b040e991
Merge branch 'feature/_spi_slave_reset_trans_queue_api_v5.0' into 'release/v5.0'
...
spi: limit esp32 dma workaround only on esp32(v5.0)
See merge request espressif/esp-idf!21381
2022-12-13 16:29:41 +08:00
morris
e843281c8f
Merge branch 'doc/explain_ledc_callback_return_value_v5.0' into 'release/v5.0'
...
ledc: explain the callback return value (v5.0)
See merge request espressif/esp-idf!20966
2022-12-06 18:08:32 +08:00
Jiang Jiang Jian
77333d2d64
Merge branch 'bugfix/fix_current_leakage_when_hold_digital_io_during_deep_sleep_backport_v5.0' into 'release/v5.0'
...
esp_hw_support/sleep: fix current leakage when hold digital io during deep sleep(backport v5.0)
See merge request espressif/esp-idf!20806
2022-12-05 14:00:59 +08:00
wanlei
ec7265dca4
spi: limit esp32 dma workaround only on esp32
2022-12-05 12:10:45 +08:00
morris
2dd67ecd05
ledc: explain the callback return value
...
Closes https://github.com/espressif/esp-idf/issues/10093
2022-12-05 02:11:48 +00:00