Commit Graph

12 Commits

Author SHA1 Message Date
liuning
c6db306833 sleep_modem: split esp_wifi_internal_mac_sleep_configure, add lock for pm functions 2023-09-18 11:49:52 +08:00
liuning
90698bf1f5 fix(sleep_modem): fix lightsleep failure if enable lightsleep at phy disabled 2023-09-18 11:46:32 +08:00
cjin
574800b50a feat: added ble wake up overhead support 2023-09-05 20:40:04 +08:00
wuzhenghui
a5c992c8af fix(esp_pm): fix PM_SLP_IRAM_OPT/PM_RTOS_IDLE_OPT feature
- Fix flash accessed code to resolve issues with PM_SLP_IRAM_OPT/PM_RTOS_IDLE_OPT enabled
2023-07-14 21:21:19 +08:00
Li Shuai
19809bdebf power save: fix bcn_timeout and disconnect with error code 201, m f probe req l=0 issue 2023-07-13 16:59:31 +08:00
xiaqilin
59ffcd07d6 ieee802154: change BLE_BB/ieee802154_BB 2023-07-03 02:21:58 +00:00
cjin
f3457133f6 ble:added esp32c6 light sleep support 2023-06-16 15:37:03 +08:00
Li Shuai
94ebda298a fix the issue of failure of receiving beacons in modem state caused by enabling light sleep in wifi min/max modem sleep mode 2023-04-07 05:57:15 +00:00
wuzhenghui
cb55d51be4 bugfix: set I2C_MST_SEL_160M always be 1 2023-03-17 19:45:56 +08:00
Li Shuai
1a10eabe41 Power Management: refactor the configuration of each module in sleep mode 2023-03-04 00:17:40 +08:00
Li Shuai
200f69e6eb auto beacon: support esp32c6 autobeacon (advanced DTIM sleep feature)
modem retention: Support esp32c6 wifi MAC and baseband sleep retention

sleep_modem: wifi MAC modem wakeup protect in modem state before PMU trigger sleep enable request

sleep modem: provide a interface to get whether the Modem power domain is allowed to power off during sleep

add i2c_ana master header file to project

auto beacon: release PMU's lock on root clock source (it is locked in the PLL)

wifi receiving beacon frame in PMU modem state strongly depends on the BBPLL
clock, PMU will forcibly lock the root clock source as PLL, when the root
clock source of the software system is selected as PLL, we need to release
the root clock source locking.

When it is judged that the PLL is locked by PMU after wakeing up from the PMU
modem state, switch the root clock source to the PLL in the sleep process (a
critical section).

auto beacon: fix the failure to receive broadcast/multicast frames in modem state

When the multicast field in the beacon frame received in the PMU modem state is
True, the PMU switches to the PMU active state (the PMU waits for the HP LDO to
stabilize and then restores the MAC context) and starts to receive
broadcast/multicast frames (Broadcast/Multicast frames will be sent after a
minimum delay of 48 us after the beacon frame), because the PMU waits for the HP
LDO to stabilize too long (~154 us), which will cause broadcast/multicast frame
reception to be missed.

auto beacon: select the PLL clock source as the REGDMA backup clock source when the PMU switches to ACTIVE from MODEM state

update Digital Peripheral (M2A switch) REGDMA restore time parameter

auto beacon: fix the issue that only channel 1 can connect to AP in modem state
2023-03-04 00:17:40 +08:00
Li Shuai
3a5fe2ab63 light sleep: rename sleep mac bb to modem, it includes MAC and baseband of wifi, bt and ieee802.15.4 modules 2023-03-04 00:17:40 +08:00