While using esp_wifi_set_config, flag pmf_capable defaults to 0.
Users may not bother to enable it, which prevents connection to a
WPA3 AP. Or the AP may reset into WPA3 mode failing the re-connection.
To ensure better security, deprecate the pmf_capable flag and set it to
true internally.
Additionally add API esp_wifi_disable_pmf_config to disable PMF for
debug purposes or to avoid PMF issues on AP side.
1. Add description for esp_wifi_set_inactive_time()
2. Add documentation to avoid using WiFi modem sleep for WiFi/BT coexistence
3. Remove description of unusable API esp_wifi_restart()
4. Update esp_now_fetch_peer discription
5. Update table format prblm for esp_wifi_set_max_tx_power()
6. Update description for ssid and password
1. Avoid parsing RSN/WPA IE's after connection
2. Remove AUTH_CHANGED reason code logic
3. fix the bug when calculating the PMK, the local rx beacon time increment is 0
4. mesh: don't disconnect when tbtt update
Added following as part of this change
1. Removed auth_changed event
2. Updated doc regarding usage of WPA/WEP secuiry modes
3. Fixed WPA2 enterprise authmode threshold.
Due to a hardware limitation in ESP32, the first four bytes of some
CSI data is invalid, not the last four bytes.
Correct a mistake of CSI sub-carrier index in documentation.
1. Move channel to the first row of the table.
2. Remove the condition of HT20/HT40 for they are determined by
secondary channel.
3. Clean up the CSI table.
The WiFi station connect sequence diagram does not have any "successful" ending.
It looks like a copy-paste error, because there are two consequent `SYSTEM_EVENT_STA_DISCONNECTED` events firing with nothing happening in between.
I think the original meaning was that the last event should be `SYSTEM_EVENT_STA_CONNECTED` to signify that if all goes well, that is the event that will be fired.
Merges https://github.com/espressif/esp-idf/pull/2065
