Cao Sen Miao
6bb129620f
temperature_sensor: Add new interface and reference counts so that phy and driver can use together
2023-09-01 10:06:31 +08:00
wuzhenghui
2df2c1cc46
fix(lightsleep): fix access pu_cfg after sleep wake wakeup which is linked to flash
2023-08-01 16:42:59 +08:00
Jiang Jiang Jian
e0550972c0
Merge branch 'bugfix/fix_chip_broken_bug_in_monitor_mode_c3s2s3_to_v4.4' into 'release/v4.4'
...
ESP32S2/C3/S3: fixed S2 dangerous power parameters in sleep modes and support S2/C3/S3 different sleep mode(v4.4)
See merge request espressif/esp-idf!23758
2023-06-20 16:46:12 +08:00
morris
564e20dd6b
Merge branch 'refactor/improve_adc_power_maintanance_v4.4' into 'release/v4.4'
...
adc: improve power logic (v4.4)
See merge request espressif/esp-idf!23275
2023-06-20 10:52:46 +08:00
hongshuqing
066a1ac0ac
fix chip broken bug in monitor mode c3s2s3 to v4.4
2023-05-15 19:36:25 +08:00
Armando
2a0a4fadd9
sar: init sar periph power state
2023-04-25 14:03:29 +08:00
jiangguangming
96f3c2bac6
rtc_time.c: simplify the rtc_time_get with LL function
2023-04-24 11:37:46 +08:00
Li Shuai
6356453f8d
sleep: fix sleep current issue caused by sar adc
2023-04-20 11:43:13 +08:00
Armando
1b2a254d71
adc: improve power logic
2023-04-20 10:42:12 +08:00
liuning
dce377bcfd
rtc_sleep: workaround systimer stall issue during lightsleep on ESP32C3
2023-04-14 11:59:42 +08:00
wuzhenghui
91b9483987
Revert "optimize deep sleep current in wifi softap mode"
...
This reverts commit 344ec80fad
.
2023-03-13 20:41:16 +08:00
KonstantinKondrashov
a86c80e3ec
all: Apply new version logic (major * 100 + minor)
2023-03-03 22:26:39 +00:00
KonstantinKondrashov
e59269efa0
esp_hw_support: Fix version in esp_chip_info for C3 and H2
2022-12-20 21:14:36 +08:00
KonstantinKondrashov
26960f1734
efuse: Adds major and minor versions and others
2022-12-20 16:30:13 +08:00
morris
193d0d6b6e
Merge branch 'bugfix/fix_rtc8m_calibration_fail_after_cpu_core_reset_v4.4' into 'release/v4.4'
...
rtc_clk: Fix rtc8m calibration failure after cpu/core reset (backport v4.4)
See merge request espressif/esp-idf!20553
2022-11-10 10:04:35 +08:00
Jiang Jiang Jian
d7ba7c3b19
Merge branch 'bugfix/fix_esprv_intc_int_set_type_err_parameter_backportv4.4' into 'release/v4.4'
...
bugfix: esprv_intc_int_set_type should not use bitmap parameter(backport v4.4)
See merge request espressif/esp-idf!20609
2022-11-09 18:03:25 +08:00
wuzhenghui
0fd3824f91
bugfix: esprv_intc_int_set_type should not use bitmap parameter
2022-10-14 15:33:53 +08:00
Song Ruo Jing
883e54aa71
rtc_clk: Fix rtc8m calibration failure after cpu/core reset
...
Explicitly guarantee 8md256 clk is enabled before calibration
2022-10-12 12:33:47 +08:00
cje
c34e900969
fix C3 system not stable bug when dbias storing in efuse is bigger than 27
2022-10-08 11:55:26 +08:00
jingli
13984c0a79
esp_hw_support/clk_cali: fix xtal32k error detect
2022-09-21 15:11:04 +08:00
Song Ruo Jing
b2f4fc022a
rtc_clk: Fix wrong RC_FAST and RC_SLOW clock frequency values on ESP32C3 and ESP32S3
2022-08-19 12:21:11 +08:00
Michael (XIAO Xufeng)
f46bd50884
pm: putting dbias and pd_cur code into same function
2022-06-05 02:33:51 +08:00
Michael (XIAO Xufeng)
254870c3c4
rtc: fixed 8MD256 can't be used as RTC slow src on ESP32
...
Sync configuration from other chips
Closes: https://github.com/espressif/esp-idf/issues/8007 , https://github.com/espressif/esp-idf/pull/8089
2022-06-05 02:33:50 +08:00
morris
0340c2f2bc
Merge branch 'bugfix/keep_rtc8m_in_lightsleep_v4.4' into 'release/v4.4'
...
pm: fixed RTC8M domain power down issue when used as RTC source (v4.4)
See merge request espressif/esp-idf!18075
2022-05-30 09:54:39 +08:00
Michael (XIAO Xufeng)
ae6c52e9f9
Merge branch 'bugfix/fix_memory_miss_bug_v4.4' into 'release/v4.4'
...
esp32c3/esp32s3: Fix cpu crash bug when wakeup from lightsleep for memory data miss (backport v4.4)
See merge request espressif/esp-idf!17826
2022-05-19 13:47:20 +08:00
chaijie
d222adbeeb
solve memory error bug when in lightsleep mode
2022-05-18 17:43:13 +08:00
Michael (XIAO Xufeng)
17b9cc6b4a
pm: fixed RTC8M domain power issues
...
introduced in e44ead5356
1. The int8M power domain config by default is PD. While LEDC is using
RTC8M as clock source, this power domain will be kept on.
But when 8MD256 is used as RTC clock source, the power domain should
also be kept on.
On ESP32, there was protection for it, but broken by commit
e44ead5356
. Currently the power domain
will be forced on when LEDC is using RTC8M as clock source &&
!int8m_pd_en (user enable ESP_PDP_DOMAIN_RTC8M in lightsleep). Otherwise
the power domain will be powered off, regardless of RTC clock source.
In other words, int8M domain will be forced off (even when 8MD256
used as RTC clock source) if LEDC not using RTC8M as clock source, user
doesn't enable ESP_PDP_DOMAIN_RTC8M, or in deep sleep.
On later chips, there's no such protection, so 8MD256 could't be used as
RTC clock source in sleep modes.
This commit adds protection of 8MD256 clock to other chips. Fixes the
incorrect protection logic overriding on ESP32. Now the power domain
will be determiend by the logic below (order by priority):
1. When RTC clock source uses 8MD256, power up
2. When LEDC uses RTC8M clock source, power up
3. In deepsleep, power down
4. Otherwise determined by user config of ESP_PDP_DOMAIN_RTC8M,
power down by default. (This is preferred to have highest
priority, but it's kept as is because of current code structure.)
2. Before, after the macro `RTC_SLEEP_CONFIG_DEFAULT` decides dbias, the
protection above may force the int8m PU. This may cause the inconsistent
of dbias and the int8m PU status.
This commit lifts the logic of pd int8m/xtal fpu logic to upper layer
(sleep_modes.c).
Related: https://github.com/espressif/esp-idf/issues/8007 , https://github.com/espressif/esp-idf/pull/8089
temp
2022-05-12 15:57:09 +08:00
chaijie
fe83802d65
fix c3 brownout bug after deepsleep
2022-04-28 18:23:28 +08:00
Michael (XIAO Xufeng)
d378ca2b78
esp_phy: use spinlock to avoid regi2c access conflicts
2022-04-06 12:18:23 +08:00
Armando
32afe6a498
sleep: restore analog calibration registers after waking up from light sleep
...
Closes https://github.com/espressif/esp-idf/issues/8287
Closes https://github.com/espressif/esp-idf/issues/7921
2022-03-07 11:28:48 +08:00
Cao Sen Miao
a74e06560b
USB_SERIAL_JTAG: Fix the issue that there is no rom log when restarting
2022-02-15 18:56:06 +08:00
Martin Vychodil
7d9652dccf
System/Security: Memprot API unified (ESP32C3,ESP32S3)
...
Unified Memory protection API for all PMS-aware chips
Closes JIRA IDF-3849
2022-01-27 12:40:27 +08:00
jingli
1d6c95000b
reduce bootup time when using usb-serial-jtag
2021-12-03 20:50:22 +08:00
wuzhenghui
5000aa877f
fix rtc_clk_cal: Wait for timeout in a loop instead of just judge once
2021-10-19 12:07:34 +08:00
wuzhenghui
ab9df9945f
fix stuck in rtc_clk_cal
2021-10-14 16:25:54 +08:00
Li Shuai
73829221f5
esp_hw_support: force power down wifi and bt power domain when rtc module init
2021-10-14 10:51:10 +08:00
Martin Vychodil
5344de34c3
System/Memprot: fixed voltage glitching detection logic
...
When the application is being debugged it should check the call result (esp_cpu_in_ocd_debug_mode())
is not given volt.glitch attack - so the result is triple-checked by ESP_FAULT_ASSERT macro. In case
the check fails, the system is reset immediately
IDF-4014
2021-10-04 09:21:07 +02:00
Jiang Jiang Jian
f5ae8b0533
Merge branch 'feature/ledc_use_rtc8m_or_xtal_lightsleep' into 'master'
...
support RTC8M and XTAL power domain in light sleep mode
Closes IDF-3419
See merge request espressif/esp-idf!15152
2021-09-27 04:02:29 +00:00
Wu Zheng Hui
1080e4f6a2
rename APB_CTRL ro SYS_CON
...
save
2021-09-16 20:57:57 +08:00
Li Shuai
b3e27403f3
esp_hw_support: keep external 40 MHz xtal related analog circuit power on during sleep
2021-09-16 14:46:21 +08:00
Li Shuai
58292a7d22
Power Management: add XTAL power domain to control whether external 40MHz xtal is powered down during sleep
2021-09-16 14:43:43 +08:00
Li Shuai
f5b39a7cde
esp_hw_support: No voltage drop during light sleep to ensure stable output clock of rtc8m oscillator
2021-09-16 14:40:46 +08:00
Li Shuai
e44ead5356
Power Management: add RTC8M power domain to control whether internal 8m oscillator is powered down during sleep
2021-09-13 17:36:54 +08:00
Sachin Parekh
fa2707f1f3
hmac: Added Downstream JTAG enable mode for esp32c3 and esp32s3
...
If JTAG is disabled temporarily by burning SOFT_DIS_JTAG, it can be
re-enabled temporarily through esp_hmac_jtag_enable API
2021-09-06 11:06:50 +05:30
Marius Vikhammer
4869b3cd4a
WDT: Add support for XTAL32K Watchdog timer
2021-09-02 09:09:00 +08:00
morris
a861575d05
Merge branch 'bugfix/fix_esp32c3_auto_adjust_volt' into 'master'
...
system: fix esp32c3 auto adjust voltage bug
See merge request espressif/esp-idf!14725
2021-08-26 02:53:22 +00:00
sly
b342b49823
fix esp32c3 auto adjust voltage bug
2021-08-25 17:08:26 +08:00
Jan Brudný
7f50818a99
esp_hw_support: update copyright notice 3
2021-08-10 13:30:57 +02:00
Renz Bagaporo
452bfda367
esp32: move dport_access
2021-07-16 20:14:26 +08:00
Renz Bagaporo
702e41e1c8
esp32s2: move crypto related functions
2021-07-16 20:14:26 +08:00