This commit deprecates the "freertos/xtensa_context.h" and "xtensa/xtensa_context.h"
include paths. Users should use "xtensa_context.h" instead.
- Replace legacy include paths
- Removed some unnecessary includes of "xtensa_api.h"
- Add warning to compatibility header
This commit deprecates the "freertos/xtensa_api.h" and "xtensa/xtensa_api.h"
include paths. Users should use "xtensa_api.h" instead.
- Replace legacy include paths
- Removed some unnecessary includes of "xtensa_api.h"
- Replaced some calls with "esp_cpu_..." equivalents
- Add warning to compatibility header
- Move vTaskStartSchedulerOtherCores()
- implementation to freertos_tasks_c_additions.h
- declaration to freertos_idf_additions_priv.h as API is private
- Rename vTaskStartSchedulerOtherCores() -> prvStartSchedulerOtherCores() to
indicate that the function is private.
Previously, if CONFIG_FREERTOS_ENABLE_STATIC_TASK_CLEAN_UP was enabled, users
would provide a definition for a vPortCleanUpTCB() hook function that is called
right before a task's memory is freed in prvDeleteTCB(). However,
vPortCleanUpTCB() will be reclaimed by ESP-IDF for internal use in v6.0.
This commit introduces the following changes...
Introduced a new CONFIG_FREERTOS_TASK_PRE_DELETION_HOOK option:
- Provides the same pre-deletion hook functionality. But users now define
vTaskPreDeletionHook() instead.
- CONFIG_FREERTOS_ENABLE_STATIC_TASK_CLEAN_UP still exists, but is marked as
deprecated. This is to maintain compatibility with existing applications
that already define vPortCleanUpTCB().
- Removed redundant --wl --wrap workaround with vPortCleanUpTCB()
- Added todo notes to remove support for user defined vPortCleanUpTCB()
completely in v6.0.
- Updated test cases to use new CONFIG_FREERTOS_TASK_PRE_DELETION_HOOK option
Freed up portCLEAN_UP_TCB() to call a new internal vPortTCBPreDeleteHook():
- vPortTCBPreDeleteHook() now replaces the previous "wrapped" implementation
of vPortCleanUpTCB().
- vPortTCBPreDeleteHook() is an internal task pre-delete hook for IDF FreeRTOS
ports to inject some pre-deletion operations.
- Internal pre-delete hook now invokes user provided vTaskPreDeletionHook()
if enabled.
- Relocated vPortTCBPreDeleteHook() to correct section in port.c
This commit refactors port_systick.c so that all ports (RISC-V vs Xtensa) of
all FreeRTOS implementations (IDF vs Amazon SMP FreeRTOS) use the same set of
tick interrupt functions. Thus, these funcitons are now common:
- vPortSetupTimer() to setup the tick interrupt's timer
- xPortSysTickHandler() that is called on each tick interrupt
The previous commit moved the OS agnostic files from the IDF FreeRTOS port to
the xtensa component, thus can be accessed by both IDF and Amazon SMP FreeRTOS.
This commit removes the redudant copies in the Amazon SMP FreeRTOS port.
This commit merges the "FreeRTOSConfig_smp.h" file into the "FreeRTOSConfig.h".
The configurations for all FreeRTOS implementations are now stored in a single
file.
xTaskRemoveFromUnorderedEventList is a scheduler internal function, thus will
never be called by users. Therefore, the compatbility define is not necessary.
The default implementation of some xtensa vectors were previously moved to
"xtensa_vector_defaults.S" as weak functions so that they could be overriden.
This commit moves these default vectors back into "xtensa_vectors.S" in
preparation for further refactoring of the xtensa component.
Vanilla FreeRTOS expects applications to use one of the heap implementations
provided by FreeRTOS (i.e., heap_x.c), where functions such as pvPortMalloc()
and vPortFree() are defined in the heap implementation.
However, ESP-IDF already provides its own heap implementation
(i.e., esp_heap_caps.h). Thus, the pvPortMallc()/vPortFree() functions were
previously overriden by macro to call esp_heap functions directly.
This commit refactors the FreeRTOS port's heap as such:
- Added a heap_idf.c that implements all of the heap related functions required
by FreeRTOS source
- All dynamic memory allocated by FreeRTOS is from internal memory. Thus, the
FreeRTOS heap is the internal memory subset of the ESP-IDF heap.
- Removed some old macros to reduce diff from upstream source code.
This commit refactors the FPU handling code on the Xtensa port of Amazon SMP
FreeRTOS in the following ways:
Auto-pinning via XT_RTOS_CP_EXC_HOOK
------------------------------------
The "_xt_coproc_exc" exception would previously automatically pin a task that
uses the FPU to the current core (to ensure that we can lazy save the task's FPU
context). However, this would mean that "xtensa_vectors.S" would need to be
OS-aware (to read the task's TCB structure).
This is now refactored so that "_xt_coproc_exc" calls a CP exception hook
function ("XT_RTOS_CP_EXC_HOOK") implemented in "portasm.S", thus allowing
"xtensa_vectors.S" to remain OS agnostic.
Using macros to acquire owner spinlock
--------------------------------------
The taking and relasing of the "_xt_coproc_owner_sa_lock" is now mostly
abstracted as the "spinlock_take" and "spinlock_release" macro. As a result,
"_xt_coproc_release" and "_xt_coproc_exc" are refactored so that:
- They are closer to their upstream (original) versions
- The spinlock is only taken when building for multicore
- The spinlock held region is shortened (now only protects the instructions
that access the "_xt_coproc_owner_sa" array
Other Changes
-------------
- Updated placing and comments of various "offset_..." constants used by
portasm.S
- Update description of "get_cpsa_from_tcb" assembly macro
- Tidied up some typos in the ".S" files
This commit fixes the following FPU/Coprocessor bugs in the Xtensa port of
Amazon SMP FreeRTOS:
- vPortCleanUpCoprocArea() does not calculate the correct pointer to the
task's CPSA (located on the task's stack). This can result in
- _xt_coproc_release() not releasing the task's CP ownership
- The next coprocessor exception will write the current CP owner (i.e., the
deleted task's CPSA) leading to memory corruption
- _xt_coproc_release() writes xCoreID instead of 0 when clearing a CP owner.
This results in the next CP exception trying to load the CP owner's CPSA at
the address of "xCoreID", leading to a double exception.
This commit refactors port_common.c so that it only contains implementation of
FreeRTOS port functions that are common to all FreeRTOS ports (i.e., on all
architectures and on all FreeRTOS implementations).
This commit refactors the OS startup functions as follows:
- Moved the OS/app startup functions listed below to "app_startup.c". Their
implementations are now common to all ports (RISC-V and Xtensa) of all
FreeRTOS implementations (IDF and Amazon SMP).
- esp_startup_start_app()
- esp_startup_start_app_other_cores()
- Removed esp_startup_start_app_common() as app startup functions are now
already common to all ports.
- Added extra logs to "main_task" to help with user debugging
Note: Increased startup delay on "unity_task". The "unity_run_menu()" is non
blocking, thus if the main task or other startup tasks have not been freed
by the time "unity_run_menu()" is run, those tasks will be freed the next time
"unity_task" blocks. This could cause some tests to have a memory leak, thus
the "unity_task" startup delay has increased.
The portDISABLE_INTERRUPTS() macro on Xtensa should return only the interrupt
mask/level before the interrupts were disabled. Previously, the entire contents
of PS register were returned (i.e., direct return from RSIL instruction without
any bit masking or shifting).
This commit fixes the portDISABLE_INTERRUPTS() macro to return the INTLEVEL
bitfield of the PS register.
The following changes have been made in this commit:
1. configMINIMAL_STACK_SIZE is now defined as CONFIG_FREERTOS_IDLE_TASK_STACKSIZE.
2. Removed configIDLE_TASK_STACK_SIZE config as it was redundant.
3. Updates the order of allocating the TCB and stack memory to avoid the
stack memory overriding the TCB memory when the stack grows downwards.
4. CONFIG_FREERTOS_IDLE_TASK_STACKSIZE is now incorporated into the
FreeRTOSConfig_smp.h to configure the IDLE0 stack size.
The llvm asm pasrser doesn't support some gnu asm extensions,
like using "&" with macro arguments. So, replace such code with
code which could be compiled by llvm.
This commit refactors the pxPortInitialiseStack() function of the xtensa
FreeRTOS ports (both IDF and SMP FreeRTOS).
- Each stack area is now separated into their own functions
- Each function will individually
- Push the stack pointer to allocate the stack area
- Initiaze the allocated stack area
- Each stack area's size and usage is now clearly documented in code
ESP32-C2 has a single group timer, thus it will use it for the interrupt watchdog,
which is more critical than the task watchdog. The latter is implement in
software thanks to the `esp_timer`component.
This commit marks all functions in interrupt_controller_hal.h, cpu_ll.h and cpu_hal.h as deprecated.
Users should use functions from esp_cpu.h instead.
This function removes the following legacy atomic CAS functions:
From compare_set.h (file removed):
- compare_and_set_native()
- compare_and_set_extram()
From portmacro.h
- uxPortCompareSet()
- uxPortCompareSetExtram()
Users should call esp_cpu_compare_and_set() instead as this function hides the details
of atomic CAS on internal and external RAM addresses.
Due to the removal of compare_set.h, some missing header includes are also fixed in this commit.
FreeRTOS uses a single "xSchedulerRunning" variable to tack whether the
scheduler has started, and this variable is set to "pdTRUE" by core 0
via calling vTaskStartScheduler().
However, with SMP FreeRTOS, there is a race condition where core 0 has
already started the scheduler and another core has not called xPortStartScheduler()
yet and calls some FreeRTOS API. Thus the resultant FreeRTOS API can
cause errors as it thinks the scheduler has started.
This commit adds a temporary workaround (by having each core maintain their
own "xSchedulerRunning" variable.
The Xtensa FreeRTOS port does not save the threadptr register when
doing a voluntary yield. This can result in a crash when multiple
tasks used the threadptr register and call "taskYIELD()".
This commit adds the threadptr register to the solicited stack frame.
This commit makes changes to cpu_ll.h, cpu_hal.h, and interrupt_controller_hal.h:
- Moved to esp_hw_support in order to be deprecated in the future
- HAL/LL API now route their calls to esp_cpu.h functions instead
Also updated soc_hal.h as follows:
- Removed __SOC_HAL_..._OTHER_CORES() macros as they dependend on cpu_hal.h
- Made soc_hal.h and soc_ll.h interfaces always inline, and removed soc_hal.c.
This commit also updates the XCHAL_ERRATUM_572 workaround by
- Removing it's HAL function and invoking the workaround it directly the bootloader
- Added missing workaround for the ESP32-S3
This commit fixes the following build errors in SMP FreeRTOS when building with GCC 11:
- "-Wattributes" warning due to conflicting attributes on xPortInterruptedFromISRContext()
- "-Wtype-limits" warning due to taskVALID_CORE_ID() not casting xCoreID
SMP FreeRTOS adds support for dynamic reentrancy in the following commit:
34b8e24d7c
This commit does the following:
- Pulls in the upstream changes
- Move __getreent() to "freertos_tasks_c_additions.h"
- Add the required configNEWLIB_REENTRANT_IS_DYNAMIC to SMP FreeRTOS port
This commit fixes how SMP FreeRTOS feeds the INT WDT. Previously, the
port used vApplicationTickHook(). Now, all cores will feed the INT WDT
in xPortSysTickHandler().
This commit moidifies the TWDT as follows:
- Adds a feature to allows subscribing arbitrary users to the TWDT
- Changes esp_task_wdt_init() API to accept configuration structure
- Changes esp_task_wdt_init() and esp_task_wdt_deinit() to subscribe/unsubscribe
idle tasks of various cores.
- Adds support for SMP FreeRTOS idle tasks
- Updates startup code TWDT initialization
- Updates API documentation
This commit updates how the TLS pointers deletion callbacks are called
during task deletion in the FreeRTOS SMP kernel. The callbacks are now
routed through the portCLEAN_UP_TCB() macro. This commit also adds a
new kconfig option CONFIG_FREERTOS_TLSP_DELETION_CALLBACKS to control
the enablement of the TLSP deletion callbacks.
esp_timer will be added as a dependency to freertos only if
CONFIG_FREERTOS_RUN_TIME_STATS_USING_ESP_TIMER is enabled.
Other components are updated to add esp_timer as public or private
dependency, as needed.
This removes esp_timer from the default list of public dependencies.
