Angus Gratton
1abd346943
docs: Call 'python -m sphinx' instead of sphinx-build
...
Fixes mismatches where default Python interpreter may not match the most recently
installed sphinx-build wrapper script (if sphinx 2 & 3 both installed, pip will
clobber any previous copy of /bin/sphinx-build when it installs the new one.)
2018-08-29 14:43:42 +08:00
Alexey Gerenkov
ac07c23e37
docs: Adds description of OpenOCD command to configure custom app image location
2018-08-27 14:08:36 +03:00
morris
988dfc6546
doc: additional translation in get_stated
2018-08-27 10:44:28 +08:00
morris
5e36837752
doc: translate build_system from en to zh_CN
2018-08-24 12:31:34 +08:00
Roland Dobai
52d11dcfb0
docs: make the use of pip install clear
2018-08-23 11:41:56 +02:00
morris
1a79900970
translated some parts in get-started section to zh_CN
...
1. "install required python packages" in docs/zh_CN/get-started/index.rst
2. docs/zh_CN/get-started/linux-setup-scratch.rst
3. docs/zh_CN/get-started/linux-setup.rst
4. docs/zh_CN/get-started/macos-setup-scratch.rst
5. docs/zh_CN/get-started/macos-setup.rst
2018-08-23 08:28:57 +02:00
Roland Dobai
62cad3a7d7
Add python-future by using python requirements file
2018-08-23 08:28:57 +02:00
Angus Gratton
7c9439dcbf
Merge branch 'bugfix/wrover-kit-camera-socket-pinout' into 'master'
...
Corrected pinout of the Camera / J4 connector
See merge request idf/esp-idf!3054
2018-08-23 09:06:04 +08:00
Ivan Grokhotkov
90f5456dba
Merge branch 'feature/rtc_cpu_freq_config' into 'master'
...
soc/rtc: Refactoring, support CPU frequencies lower than XTAL
See merge request idf/esp-idf!2856
2018-08-22 11:32:08 +08:00
krzychb
1857bca871
Corrected pinout of the Camera / J4 connector
2018-08-21 22:01:28 +02:00
Jeroen Domburg
9de884f586
Merge branch 'feat/spi_non_dma_64byte' into 'master'
...
spi_master: change high part config to allow transactions of 64 bytes
See merge request idf/esp-idf!3025
2018-08-21 16:53:37 +08:00
Ivan Grokhotkov
e3d76d13b4
docs: update power management section on esp_pm_configure
2018-08-21 13:02:46 +08:00
Ivan Grokhotkov
4dd7233b20
Merge branch 'feature/reset_reason' into 'master'
...
Add API to get reset reason
See merge request idf/esp-idf!2871
2018-08-21 11:34:12 +08:00
Ivan Grokhotkov
8403adf4e0
docs: add API reference section for esp_system.h
2018-08-20 16:49:20 +08:00
Angus Gratton
76f864511d
Merge branch 'feature/docs_new_logo_typeface' into 'master'
...
Replaced Espressif logo with a new, consistent, modern and neutral typeface design.
See merge request idf/esp-idf!2988
2018-08-20 08:22:02 +08:00
Jiang Jiang Jian
98eaa5c2ec
Merge branch 'docs/security' into 'master'
...
docs: Added more wordings to capture secure boot and flash encryption dependency.
See merge request idf/esp-idf!2947
2018-08-16 19:31:36 +08:00
michael
404e99965d
spi_master: change high part config to allow transactions of 64 bytes
2018-08-16 18:55:09 +08:00
Angus Gratton
ff2404a272
Merge branch 'master' into feature/cmake
2018-08-16 17:14:17 +10:00
Krzysztof Budzynski
df5d3ea692
Provided a table with development boards by Espressif together with USB-to-serial driver names
2018-08-16 05:24:40 +08:00
Ivan Grokhotkov
73e18a4c96
Merge branch 'docs/simplified_rtd_theme_configuration' into 'master'
...
Removed redundant code to configure 'sphinx-rtd-theme' for documentation
See merge request idf/esp-idf!2921
2018-08-16 05:23:54 +08:00
Angus Gratton
802fc7236d
Merge branch 'doc/unit_test_zh_CN' into 'master'
...
doc: translate the unit-tests.rst into Chinese
See merge request idf/esp-idf!2998
2018-08-15 09:05:17 +08:00
morris
90350cb82d
doc/unit-tests:translate the unit-tests into zh_CN
2018-08-14 15:47:08 +08:00
Sagar Bijwe
b27773e87c
docs: Added more wordings to capture secure boot and flash encryption dependency.
2018-08-14 11:27:29 +05:30
Ivan Grokhotkov
1fbff01799
docs: update esp32ulp-binutils download link
2018-08-13 16:48:27 +00:00
Ivan Grokhotkov
1bd7d404fe
ulp: add documentation for JUMPS instruction conditions
...
Hardware implements conditions LE, LT, GE, and conditions EQ and GT
are implemented in the assembler by emitting two JUMPS instructions
with other conditions.
2018-08-13 16:48:27 +00:00
Angus Gratton
04238fa5e5
docs: Python 3 Sphinx compatibility
2018-08-13 15:37:03 +10:00
Angus Gratton
191557db02
docs: Copy CMake docs to a separate set of directories
...
Required first step before merging back to mainline.
2018-08-13 15:37:03 +10:00
krzychb
4946850e82
Replaced Espressif logo with a new, consistent, modern and neutral typeface design.
2018-08-13 07:22:41 +02:00
Angus Gratton
69f73eb5ee
docs: Move version-related includes to run in sphinx-build not make
...
Means they show up on ReadTheDocs(!)
2018-08-13 12:24:55 +10:00
Angus Gratton
383a3f788d
Merge branch 'doc/heap_tracing' into 'master'
...
heap docs: Fix some bad links & errors in the heap docs
See merge request idf/esp-idf!2942
2018-08-10 16:46:52 +08:00
Angus Gratton
c9cbc6b30c
heap docs: Fix some bad links & errors in the heap docs
...
Also add a note about printf() sometimes causing on-demand allocations.
2018-08-10 15:54:58 +10:00
Angus Gratton
f341c5c944
Merge branch 'doc/versions' into 'master'
...
docs: Add version-specific include files, version documentation
See merge request idf/esp-idf!2858
2018-08-10 08:08:10 +08:00
Angus Gratton
13ff99867d
docs: Combine the common en/zh_CN Makefiles to one common file
2018-08-09 11:08:03 +10:00
Michael (XIAO Xufeng)
522f9c4b4a
docs: translate the version include script to Chinese
2018-08-09 11:08:03 +10:00
Ivan Grokhotkov
80c5547b97
Merge branch 'bugfix/ulp_fixes' into 'master'
...
ULP fixes
See merge request idf/esp-idf!2948
2018-08-08 15:37:25 +08:00
Ivan Grokhotkov
479af576ca
ulp: fix calculation or ulp_run argument
...
The argument to ulp_run should be expressed in 32-bit words. Both the
address of ulp_entry and RTC_SLOW_MEM already are uint32_t*, so their
difference is the difference in addresses divided by sizeof(uint32_t).
Therefore the extra division by sizeof(uint32_t) is not needed.
2018-08-07 16:14:57 +03:00
Angus Gratton
ffaa71bcd6
docs: Add version-specific include files, version documentation
...
* "git clone" command and a small version header are generated
depending on git properties.
* Add Versions page with details about each version
* Make it clear using master branch is living on the "bleeding
edge"
2018-08-06 15:38:32 +10:00
Jitin George
1fecdc3891
esp_https_ota: Add support for HTTPS based ota feature
2018-08-03 16:47:07 +05:30
Angus Gratton
b3ff68a935
Merge branch 'bugfix/hard_error_partition_offset' into 'master'
...
partition_table: Hard error if CSV contains invalid/overlapping offsets
See merge request idf/esp-idf!2755
2018-08-03 14:52:43 +08:00
krzychb
df9c701864
Removed redundant code to configure 'sphinx-rtd-theme' for documentation
2018-08-02 22:10:33 +02:00
Angus Gratton
d3ae52afd2
Merge branch 'feature/add_logo_to_docs' into 'master'
...
Added Espressif logo to documentation
See merge request idf/esp-idf!2763
2018-08-02 08:26:14 +08:00
Angus Gratton
f2a3429812
partition table: Document 'flags' properly
2018-08-01 19:23:38 +10:00
Angus Gratton
28801449e3
partition_table: Hard error if CSV contains invalid/overlapping offsets
...
Based on report on forum here:
https://esp32.com/viewtopic.php?f=13&t=6382&p=27514
Previous versions were much more relaxed about what could be in the partition
table, erroring out avoids unexpected changes on upgrade like different
partition offsets.
2018-08-01 19:23:38 +10:00
Angus Gratton
7457054c1f
Merge branch 'feature/add_rom_elf' into 'master'
...
Support for ROM functions in core dump backtraces
See merge request idf/esp-idf!2672
2018-08-01 15:21:03 +08:00
Jiang Jiang Jian
a539754c2e
Merge branch 'doc/wifi_update_channel_state_information_document' into 'master'
...
docs: update channel state information document
See merge request idf/esp-idf!2793
2018-08-01 14:49:14 +08:00
Roland Dobai
1d1533ee8e
expat: Move libexpat into submodule and update to version 2.2.5
2018-07-31 13:25:00 +02:00
krzychb
42cf4429a9
Fixed logo width to display correctly in Chinese version of documentation
2018-07-30 21:16:27 +02:00
David Cermak
1ef13c524c
asio: initial idf port of asio library without ssl
2018-07-30 06:28:43 +00:00
Angus Gratton
97286b3107
Merge branch 'feature/cmd_flash_reset_ota_data' into 'master'
...
make: Add feature to cmd 'make flash' - reset ota_data partition
See merge request idf/esp-idf!2611
2018-07-30 13:52:43 +08:00
Alexey Gerenkov
821fe3dc5a
esp32: Adds SW flash breakpoints description
2018-07-26 13:56:45 +03:00
Konstantin Kondrashov
de2b1cb02a
make: Add feature to cmd 'make flash' - reset ota_data partition
...
Add a command `make erase_ota` - erases otadata if it there is in the
partition table otherwise error 'Partition table does not have ota_data partition'.
Closes https://github.com/espressif/esp-idf/issues/1821
2018-07-25 11:22:15 +00:00
krzychb
c7ab37143b
Logo version 8, vector graphics and a new typeface
2018-07-23 19:18:50 +02:00
Angus Gratton
5f2f84c220
Merge branch 'feature/http_server_finalize' into 'master'
...
Feature add HTTP Web Server component
See merge request idf/esp-idf!2606
2018-07-23 13:11:04 +08:00
Angus Gratton
57342c449d
Merge branch 'feature/tools_mass_mfg' into 'master'
...
Add files for mass manufacturing tool
See merge request idf/esp-idf!2716
2018-07-23 13:10:17 +08:00
krzychb
992ead0671
Logo version 7 - gray logo background, improved contrast, simplified css overrides
2018-07-21 20:06:27 +02:00
Ivan Grokhotkov
999c3dbf0e
Merge branch 'feature/test_exclude_components' into 'master'
...
build: Add TEST_EXCLUDE_COMPONENTS
See merge request idf/esp-idf!2648
2018-07-20 19:43:46 +08:00
Ivan Grokhotkov
0e3694b542
Merge branch 'feature/freertos_vtasklist_xcoreid' into 'master'
...
freertos: Add option to display xCoreID in vTaskList
See merge request idf/esp-idf!2728
2018-07-20 18:46:41 +08:00
Anurg Kar
656bef7bb7
Http Server : Add a simple light weight HTTP Server Component.
...
Also add examples, docs and test apps for the HTTP Server.
2018-07-20 15:49:17 +05:30
Shivani Tipnis
35205d8513
Add files and docs for mass mfg
2018-07-20 10:41:11 +05:30
Angus Gratton
a7d00f44ab
Merge branch 'feature/esp32-pico-kit_v4.1' into 'master'
...
Added description of ESP32-PICO-KIT V4.1 board
See merge request idf/esp-idf!2762
2018-07-19 08:05:00 +08:00
krzychb
ca15dbd05e
Added description of ESP32-PICO-KIT V4.1 board
2018-07-18 20:02:43 +02:00
Ivan Grokhotkov
0b78959070
Merge branch 'bugfix/deep_sleep_flush_uart' into 'master'
...
sleep: fix flushing UARTs when entering deep sleep
See merge request idf/esp-idf!2698
2018-07-18 14:55:13 +08:00
krzychb
2506a9416e
Version 2 of the logo, without a frame an with uniform color
2018-07-18 07:03:00 +02:00
krzychb
2fd5ce3022
Made the logo smaller
2018-07-18 07:03:00 +02:00
krzychb
da86681f21
Added Espressif logo to documentation
2018-07-18 07:03:00 +02:00
kittinson
ae728d66c8
Update theme_overrides.css
...
Changed colors in css file, in order to make documentation website look like official website.
2018-07-18 07:03:00 +02:00
Ivan Grokhotkov
cffaa9f5b5
freertos: add configTASKLIST_INCLUDE_COREID
2018-07-17 10:57:26 +00:00
XiaXiaotian
85ad8cfcfc
docs: update channel state information document
...
1. Move channel to the first row of the table.
2. Remove the condition of HT20/HT40 for they are determined by
secondary channel.
3. Clean up the CSI table.
2018-07-17 14:50:30 +08:00
Angus Gratton
e5d2406b1d
Merge branch 'bugfix/spi_cs_setup_fulldup' into 'master'
...
fix(spi_master): allow to use cs_ena_pretrans in full duplex mode without…
See merge request idf/esp-idf!2576
2018-07-16 16:30:36 +08:00
Angus Gratton
68e01045f1
Merge branch 'bugfix/secure_boot_regression_partitions' into 'master'
...
Fix secure boot & flash encryption regression, don't verify partitions as part of secure boot
See merge request idf/esp-idf!2764
2018-07-16 12:07:56 +08:00
Angus Gratton
cee6d7d5a9
docs: Add more ReST-isms in secure boot & flash encryption docs
...
(Original version of these docs were in Markdown.)
2018-07-16 11:52:52 +10:00
Angus Gratton
6a498bfe2b
docs: Add note about bootloader size for flash encryption & secure boot
2018-07-16 11:52:52 +10:00
Ivan Grokhotkov
b354770f42
Merge branch 'bugfix/fixes_from_github' into 'master'
...
Fixes from Github
See merge request idf/esp-idf!2730
2018-07-13 15:03:50 +08:00
Angus Gratton
8b5a2ccb8d
docs: Update Flash Encryption docs to clarify reflashing options
2018-07-13 16:18:07 +10:00
Angus Gratton
a67d5d89e0
Replace all DOS line endings with Unix
...
Command run was:
git ls-tree -r HEAD --name-only | xargs dos2unix
2018-07-12 19:10:37 +08:00
Angus Gratton
74245d27d3
ci: Add line endings check for CRLF in repository
2018-07-12 19:10:37 +08:00
Angus Gratton
064261cd3a
Merge branch 'bugfix/adc_two_point_cal_val_update' into 'master'
...
Updated information in documentation about 'Two Point Values' used to calibrate ADC readings
See merge request idf/esp-idf!2678
2018-07-11 12:53:33 +08:00
Konstantin Kondrashov
bec14ad8ee
build: Add TEST_EXCLUDE_COMPONENTS
...
To exclude during the build process of unit tests some components.
2018-07-10 13:44:41 +05:00
Carney Wu
7ccc28de6c
alias 需要添加到 .bashrc 文件中
...
Merges https://github.com/espressif/esp-idf/pull/2097
2018-07-09 14:36:47 +08:00
Carney Wu
fab55e3266
alias should set in .bashrc
...
Merges https://github.com/espressif/esp-idf/pull/2097
2018-07-09 14:36:47 +08:00
Avraham Shukron
0cab3cecfd
doc/wifi: small fixup
...
The WiFi station connect sequence diagram does not have any "successful" ending.
It looks like a copy-paste error, because there are two consequent `SYSTEM_EVENT_STA_DISCONNECTED` events firing with nothing happening in between.
I think the original meaning was that the last event should be `SYSTEM_EVENT_STA_CONNECTED` to signify that if all goes well, that is the event that will be fired.
Merges https://github.com/espressif/esp-idf/pull/2065
2018-07-09 14:35:51 +08:00
Alexey Gerenkov
8fe2a77c46
coredump: Adds support for ROM ELF file to 'espcoredump' script
2018-07-05 22:20:20 +03:00
Darian Leung
1d2727f4c8
CAN Driver
...
The following commit contains the first version of the ESP32 CAN Driver.
closes #544
2018-07-04 14:01:57 +08:00
Ivan Grokhotkov
10c2cddddf
sleep: fix flushing UARTs when entering deep sleep
...
Since 94250e42a0
, UART output is suspended when entering sleep mode
(deep or light sleep). This makes sense for light sleep, where sleep
normally takes small amount of time, and flushing the UART would add
a lot of latency. But this breaks existing behaviour for deep sleep,
where UART output was previously sent out before entering sleep mode.
Closes https://github.com/espressif/esp-idf/issues/2145
2018-07-04 12:11:25 +08:00
Angus Gratton
909eec9c3b
Merge branch 'feature/uart_add_rs485_interface_support' into 'master'
...
driver: add rs485 half duplex interface support to uart driver
See merge request idf/esp-idf!2415
2018-07-03 14:34:33 +08:00
Angus Gratton
52f4ff6220
Merge branch 'feature/spi_little_endien' into 'master'
...
feature(spi): provide macro to write multi-byte data straightly
See merge request idf/esp-idf!2634
2018-07-03 14:32:41 +08:00
Alex Lisitsyn
ef5dc73f6f
driver: add rs485 half duplex interface support to uart driver (update after review)
...
An existing UART driver does not support RS485 half duplex mode.
This task adds this functionality to ESP_IDF UART driver.
driver/uart.c/h: updated to add support of RS485 half duplex mode
examples/peripherals/uart_echo_rs485/main/rs485_example.c: added test example
components/driver/test/test_uart.c: added test of RS485 half duplex mode
docs/en/api-reference/peripherals/uart.rst: updated documentation
test_uart.c: suppress GCC warnings about discarded const qualifiers
uart.rst: remove sphinx warning - "Duplicate explicit target name"
simple change in uart.h file
update (test_uart.c) after rebase from master
update uart.rst, uart.c, rs485_example.c
Update example description in file Readme.md
update uart.c/h, uart.rst, test_uart.c according to review results
update uart.h (uart_set_rx_timeout() description
test_uart.c remove ignore tag
uart.c/h: fix param errors
test_uart.c: Remove GCC warning supress
uart.rst: fix the notes
rs485_example.c: fix output
The tests are completed using RS485 adapters hardware connected to two ESP32 WROVER KITs.
TW#13812
Closes https://github.com/espressif/esp-idf/pull/667
Closes https://github.com/espressif/esp-idf/pull/1006
2018-07-02 15:24:58 +02:00
Alex Lisitsyn
51e9cf6848
driver: add rs485 half duplex interface support to uart driver (update after review)
...
An existing UART driver does not support RS485 half duplex mode.
This task adds this functionality to ESP_IDF UART driver.
driver/uart.c/h: updated to add support of RS485 half duplex mode
examples/peripherals/uart_echo_rs485/main/rs485_example.c: added test example
components/driver/test/test_uart.c: added test of RS485 half duplex mode
docs/en/api-reference/peripherals/uart.rst: updated documentation
test_uart.c: suppress GCC warnings about discarded const qualifiers
uart.rst: remove sphinx warning - "Duplicate explicit target name"
simple change in uart.h file
update (test_uart.c) after rebase from master
update uart.rst, uart.c, rs485_example.c
Update example description in file Readme.md
update uart.c/h, uart.rst, test_uart.c according to review results
The tests are completed using RS485 adapters hardware connected to two ESP32 WROVER KITs.
TW#13812
Closes https://github.com/espressif/esp-idf/pull/667
Closes https://github.com/espressif/esp-idf/pull/1006
2018-07-02 15:24:58 +02:00
Michael (XIAO Xufeng)
3d23fe9a61
feature(spi): provide macro to write multi-byte data straightly
...
resolves https://github.com/espressif/esp-idf/issues/2062
2018-07-02 15:34:47 +08:00
Angus Gratton
fdee0b64a0
Merge branch 'bugfix/doc_blufi' into 'master'
...
bugfix/doc_blufi
See merge request idf/esp-idf!2644
2018-07-02 12:12:48 +08:00
Angus Gratton
a8fa4201b9
Merge branch 'docs/eclipse_regex' into 'master'
...
Docs: Fix bugs in Eclipse setup in CN
See merge request idf/esp-idf!2620
2018-07-02 09:18:26 +08:00
krzychb
8a7ee46b7f
Fixed link to 'TEMPLATE_EXAMPLE_README.md'
2018-07-01 19:33:37 +02:00
krzychb
f4ef7689bd
The 'Two Point Values' used to calibrate ADC readings, unlike 'eFuse Vref', are not measured and burned into eFuse BLOCK3 for each individual chip during factory calibration. This operation should be done by user, if more accurate calibration is required.
2018-06-29 19:01:11 +02:00
Jin Fang Cheng Cheng
9e3c3f267e
Update eclipse-setup.rst
2018-06-28 17:58:19 +08:00
Jin Fang Cheng Cheng
3d6d252b3e
Update eclipse-setup-windows.rst
2018-06-28 17:57:55 +08:00
Jin Fang Cheng Cheng
d9653e75e9
Update eclipse-setup.rst
2018-06-28 15:16:20 +08:00
Jin Fang Cheng Cheng
084a6b54e2
Update eclipse-setup-windows.rst
2018-06-28 15:10:36 +08:00
Jin Fang Cheng Cheng
a0928b4ce2
Update eclipse-setup-windows.rst
2018-06-28 15:00:40 +08:00
Jin Fang Cheng Cheng
f1acb27a66
Fix the tables.
2018-06-28 14:09:14 +08:00
Jin Fang Cheng Cheng
dd66dda11e
Fix the typo and tables.
2018-06-28 14:06:26 +08:00
Angus Gratton
c07ec696dc
Merge branch 'bugfix/eclipse_regex' into 'master'
...
Docs: Fix bugs in Eclipse setup
See merge request idf/esp-idf!2617
2018-06-27 09:38:47 +08:00
Angus Gratton
d096cac97d
Merge branch 'docs/update_resources.rst' into 'master'
...
docs/update_resources.rst
See merge request idf/esp-idf!2532
2018-06-27 08:09:57 +08:00
Angus Gratton
e9029fd8de
Merge branch 'docs/esp32-devkitv-v4_updates' into 'master'
...
Renamed ESP-WROOM-32 to ESP32-WROOM-32/D/U including links to data sheets,…
See merge request idf/esp-idf!2567
2018-06-27 07:29:52 +08:00
Jin Fang Cheng Cheng
c4eff744b3
Fixed link to documentation and updated some wording
2018-06-26 18:28:15 +02:00
krzychb
b101e118f2
Renamed ESP-WROOM-32 to ESP32-WROOM-32/D/U including links to data sheets, reflected upcoming ESP32-SOLO-1 as one of options for ESP32-DevKitC, provided updated schematics and notes on C15.
2018-06-26 18:08:47 +02:00
Angus Gratton
2074d36d43
doc: Clarify some Eclipse setup steps
2018-06-26 17:34:29 +10:00
Jin Fang Cheng Cheng
6a1250cf19
Update eclipse-setup.rst
2018-06-26 13:15:13 +08:00
Jin Fang Cheng Cheng
fe7647936a
Update eclipse-setup-windows.rst
2018-06-26 13:13:08 +08:00
Jin Fang Cheng Cheng
d57649aed1
Update eclipse-setup-windows.rst according to https://gitlab.espressif.cn:6688/idf/esp-idf/merge_requests/2617 .
2018-06-26 12:55:34 +08:00
Jin Fang Cheng Cheng
0a033b5e05
Update eclipse-setup.rst according to https://gitlab.espressif.cn:6688/idf/esp-idf/merge_requests/2617
2018-06-26 12:54:15 +08:00
Angus Gratton
75dc2f5800
doc: Fix Build Output Parser command pattern to include C++ correctly
...
Previously only C files had build output correctly parsed.
Closes https://github.com/espressif/esp-idf/issues/2056
May also relate to:
https://github.com/espressif/esp-idf/issues/529
https://github.com/espressif/esp-idf/issues/17
2018-06-26 13:47:14 +10:00
Michael (XIAO Xufeng)
fe076f5cb9
doc(sdio_slave): add some information of slave protocol
2018-06-25 06:55:19 +00:00
Ivan Grokhotkov
86d6c09387
Merge branch 'bugfix/esp_err_name_idf_path' into 'master'
...
docs: fix error code reference build issue
See merge request idf/esp-idf!2587
2018-06-25 13:41:17 +08:00
michael
8676830e61
fix(spi_master): allow to use cs_ena_pretrans in full duplex mode without command and address phases
2018-06-25 04:30:14 +00:00
Angus Gratton
0a02d824fc
partition_table: Warn if the partition table name doesn't match type & subtype
2018-06-22 17:51:34 +10:00
Ivan Grokhotkov
8c87df538e
docs: conf.py: check return code when calling os.system
...
Several calls were made but results were not checked, obfuscating the
errors.
2018-06-21 15:22:56 +08:00
Angus Gratton
75d732887b
Merge branch 'doc/examples_guide' into 'master'
...
docs: Add "Creating Examples" docs page, template example README
See merge request idf/esp-idf!2536
2018-06-21 13:59:44 +08:00
Ivan Grokhotkov
4b91c82cc4
Merge branch 'feat/sdio_pullup' into 'master'
...
feature(sdio): add features to make SDIO slave compatible with more devkits
See merge request idf/esp-idf!2454
2018-06-20 13:58:56 +08:00
Angus Gratton
d0b8f2865f
docs: Switch base URL from esp-idf.readthedocs.io to docs.espressif.com
2018-06-19 11:23:33 +00:00
Angus Gratton
86148a740b
Merge branch 'feature/fatfs_without_wl' into 'master'
...
FATFS support without wear levelling
See merge request idf/esp-idf!2526
2018-06-18 12:26:02 +08:00
Sagar Bijwe
fd7b794e81
FATFS support without wear levelling
...
This change allows readonly FATFS to be mounted without wear levelling
support. This will provide the customers a simple way to mount FATFS images
generated on host and flashed onto the chip during factory provisioning.
Since NVS encryption is not supported yet and NVS entry size is limited,
the change will provide an easy alternative for securing the provisioning data
by just marking FATFS parition as encrypted.
2018-06-16 16:02:35 +08:00
Michael (XIAO Xufeng)
9377575415
docs(spi_master): fix wavedrom image and comment mistake
2018-06-15 17:38:27 +08:00
Ivan Grokhotkov
efd16673bc
docs: add pages about error handling
2018-06-15 15:53:23 +08:00
Ivan Grokhotkov
d9f8311b9d
docs: add error codes reference
2018-06-15 15:49:24 +08:00
Ivan Grokhotkov
5e0a3d99e8
Kconfig: split out compiler options, add them to reference
2018-06-15 15:49:23 +08:00
Ivan Grokhotkov
b1b1257476
docs/ulp: fix instruction fetch and execution times
2018-06-14 19:42:31 +08:00
Angus Gratton
df4e227855
docs: Add "Creating Examples" docs page, template example README
2018-06-14 16:49:22 +10:00
Angus Gratton
59ab2136e8
Merge branch 'doc/kconfig_item' into 'master'
...
doc: fix the level inconsistent issue in Kconfig document
See merge request idf/esp-idf!2460
2018-06-14 12:51:50 +08:00
michael
85b08684e3
doc(sdio_slave): add descriptions about conflicts on MTDI pin
2018-06-14 12:04:23 +08:00
Ivan Grokhotkov
70eed4c284
Merge branch 'docs/update_eclipse-setup' into 'master'
...
Docs/update_eclipse-setup
See merge request idf/esp-idf!2528
2018-06-11 23:20:24 +08:00
Angus Gratton
84f78110dd
Merge branch 'feature/esp_timer_example' into 'master'
...
examples: add esp_timer example
See merge request idf/esp-idf!2494
2018-06-11 11:44:45 +08:00
Ivan Grokhotkov
03d78e7afb
Merge branch 'feature/Add_noinit_rtc_noinit_sections' into 'master'
...
esp32: Add .noinit and .rtc_noinit sections to the linker script
See merge request idf/esp-idf!1996
2018-06-08 16:01:30 +08:00
Angus Gratton
bcd4fb9944
Merge branch 'doc/jtag_startup_command_fix' into 'master'
...
docs/jtag: use 'flushregs' instead of 'x $a1=0' in gdbinit
See merge request idf/esp-idf!2520
2018-06-08 15:15:29 +08:00
XuanZe
dc30603242
Translate the resources.rst Merges https://github.com/espressif/esp-idf/pull/1979
2018-06-08 14:58:36 +08:00
Ivan Grokhotkov
f47af6185d
docs/jtag: use ‘flushregs’ instead of ‘x $a1=0” in gdbinit
...
The old command caused was incorrect (x is “examine”, not “execute”)
and caused GDB register update only by chance. This replaces it with
“flushregs” command which purpose is exactly that — force GDB to
fetch registers from the remote.
2018-06-08 11:45:46 +08:00
Jin Fang Cheng Cheng
f9a3368f28
Update eclipse-setup.rst
2018-06-08 11:00:29 +08:00
Angus Gratton
c8d3c6a494
Merge branch 'feature/monitor_filter_output' into 'master'
...
idf_monitor: add support for filtering options
See merge request idf/esp-idf!2486
2018-06-08 08:09:40 +08:00
Ivan Grokhotkov
ab538bb9f3
Merge branch 'feat/spi_master_timing' into 'master'
...
feature(spi_master): fine tune the timing of spi master
See merge request idf/esp-idf!2301
2018-06-07 20:19:06 +08:00
Angus Gratton
950dd8e3e5
docs: Standardise CMake vs cmake
2018-06-07 15:18:48 +10:00
Angus Gratton
6065d2fd08
kconfig: Add confserver.py to expose sdkconfig to clients
2018-06-07 14:23:08 +10:00
Ivan Grokhotkov
2f5cd89833
examples: add esp_timer example
2018-06-07 11:59:36 +08:00
Angus Gratton
d7d559a489
Merge branch 'doc/api-guides_blufi' into 'master'
...
Doc/api guides blufi
See merge request idf/esp-idf!2376
2018-06-07 08:54:27 +08:00
Angus Gratton
70c6f8a803
Merge branch 'bugfix/few_typos_in_docs' into 'master'
...
Fix few typos in documentation
See merge request idf/esp-idf!2519
2018-06-07 08:24:23 +08:00
krzychb
713141e631
Replaced ASCII art drawings with blockdiag drawings
2018-06-06 23:27:05 +02:00
Mahavir Jain
6e48e52478
docs: fix flash_encryption key generation command
...
Signed-off-by: Mahavir Jain <mahavir@espressif.com>
2018-06-06 18:21:00 +05:30
michael
5cf7d3768d
feat(spi_master): fine tune the timing of SPI
2018-06-06 06:08:39 +00:00
Jin Fang Cheng Cheng
b889305c1b
Update blufi.rst
2018-06-06 12:11:57 +08:00
Jin Fang Cheng Cheng
4a25f18f21
Update blufi.rst
2018-06-06 12:05:27 +08:00
Jin Fang Cheng Cheng
ad48c2689f
Update blufi.rst
2018-06-06 11:58:46 +08:00
Jin Fang Cheng Cheng
3a15efd3c3
Delete api-guides_blufi.png
2018-06-06 11:46:13 +08:00