Commit Graph

3170 Commits

Author SHA1 Message Date
Angus Gratton
e477ce93e9 idf_monitor: Small fixes (baud rate, EOL, /dev/tty.X on macOS, Ctrl-T on failure)
* "make monitor" not passed the configured baud rate
  Closes #436 https://github.com/espressif/esp-idf/issues/436
* Pass toolchain prefix from sdkconfig into monitor tool
* Allow setting EOL in idf_monitor.py, use CRLF by default
* Detect if /dev/tty.X is used on macOS, warn and replace with /dev/cu.X
* If a build fails or gdb exits, ignore Ctrl-T (allowing Ctrl-T Ctrl-A/F to be same key sequence everywhere)
* Add a note about winpty on Windows
  Ref 02fdf8271d (commitcomment-21369196)
2017-03-21 16:00:32 +08:00
Angus Gratton
39e728622f build system: Call 'git status' w/ machine-readable output once to check submodules
This is substantially faster than the 'git submodule status' command, has same effect. Particularly noticeable on
Windows, where 'submodule status' takes 2 seconds and 'status' takes 0.2 seconds.
2017-03-21 16:00:03 +08:00
Ivan Grokhotkov
9254d2846f Merge branch 'feature/ledc_low_speed_channels' into 'master'
add ledc low speed channels

1. add low speed channels
2. modify example code.

See merge request !490
2017-03-21 15:35:40 +08:00
Ivan Grokhotkov
91d35f01f2 Merge branch 'bugfix/i2c_spikes_on_master_init_#393_from_github' into 'master'
bugfix: I2C spikes on master init

Fix I2C spikes on master init.
Before I2C io init, set high level on SDA/SCK IOs.

Fixes https://github.com/espressif/esp-idf/issues/393

See merge request !593
2017-03-21 15:09:16 +08:00
Ivan Grokhotkov
e4e8a903c3 Merge branch 'bugfix/touch_pad_read_takes_too_much_time' into 'master'
modify touch pad read function

The touch pad read function taks too much time within spin lock waiting for the "done bit". (about 7.6ms as we tested)
So we try to use a mutex on the touch read function and any other functions might change the "done bit".

See merge request !543
2017-03-21 14:46:30 +08:00
Ivan Grokhotkov
55e34c5464 Merge branch 'bugfix/i2c_driver_error_under_release_optimization_level' into 'master'
bugfix: i2c driver not working in 'RELEASE' configuration

This issue is reported from https://github.com/espressif/esp-idf/issues/304.

We found that when we operate the hw command registers in I2C struct, sometimes the behaviour would be different in DEBUG/RELEASE optimisation level:

The code looks like this:
```
I2C[i2c_num]->command[p_i2c->cmd_idx].byte_num -= 0;
```

In DEBUG configuration:
```
I2C[i2c_num]->command[p_i2c->cmd_idx].byte_num -= 0;
400f3ab0:    3388          l32i.n    a8, a3, 12
400f3ab2:    14c882            addi    a8, a8, 20
400f3ab5:    a08840            addx4    a8, a8, a4
400f3ab8:    0020c0            memw
400f3abb:    2898          l32i.n    a9, a8, 8
400f3abd:    0020c0            memw
400f3ac0:    28b8          l32i.n    a11, a8, 8
400f3ac2:    74a090            extui    a10, a9, 0, 8
400f3ac5:    00af92            movi    a9, 0xffffff00
400f3ac8:    109b90            and    a9, a11, a9
400f3acb:    2099a0            or    a9, a9, a10
400f3ace:    0020c0            memw
400f3ad1:    2899          s32i.n    a9, a8, 8
```

In RELEASE configuration:

```
I2C[i2c_num]->command[p_i2c->cmd_idx].byte_num -= 0;
400f2ba2:    580572            l8ui    a7, a5, 88
400f2ba5:    747070            extui    a7, a7, 0, 8
400f2ba8:    0020c0            memw
400f2bab:    584572            s8i    a7, a5, 88
```

Looks like the compiler will make it a 8bit operation after optimisation.

But the register value changes from 0x901 to 0x101.

After this 8-bit optimisation, the 11th bit changed from 1 to zero, which caused this error.

We are still trying to find out why that happens, because there might be some risk when operating the register struct.

This is a workaround to avoid "-=" operation on I2C register struct fields.

See merge request !592
2017-03-21 14:39:29 +08:00
Ivan Grokhotkov
e57da86baf Merge branch 'feature/adc_demo' into 'master'
feat(adc): add add adc1 channl4(GPIO32) for adc example

add adc example

See merge request !572
2017-03-21 14:38:54 +08:00
Chu Shu Chen
bab7a2df80 add adc1 example 2017-03-20 14:46:41 +08:00
Wangjialin
1ad68de8b8 bugfix: I2C spikes on master init #393 from github
Fix I2C spikes on master init.
This issue is reported from https://github.com/espressif/esp-idf/issues/393
Before I2C io init, set high level on SDA/SCK IOs.
2017-03-19 17:05:07 +08:00
Wangjialin
94b91ee4af bugfix: i2c driver not working in 'RELEASE' configuration
This issue is reported from https://github.com/espressif/esp-idf/issues/304.
We found that when we operate the hw command registers in I2C struct, sometimes the behaviour would be different in DEBUG/RELEASE optimisation level:

The code looks like this:
I2C[i2c_num]->command[p_i2c->cmd_idx].byte_num -= 0;

In DEBUG configuration:
I2C[i2c_num]->command[p_i2c->cmd_idx].byte_num -= 0;
400f3ab0:    3388          l32i.n    a8, a3, 12
400f3ab2:    14c882            addi    a8, a8, 20
400f3ab5:    a08840            addx4    a8, a8, a4
400f3ab8:    0020c0            memw
400f3abb:    2898          l32i.n    a9, a8, 8
400f3abd:    0020c0            memw
400f3ac0:    28b8          l32i.n    a11, a8, 8
400f3ac2:    74a090            extui    a10, a9, 0, 8
400f3ac5:    00af92            movi    a9, 0xffffff00
400f3ac8:    109b90            and    a9, a11, a9
400f3acb:    2099a0            or    a9, a9, a10
400f3ace:    0020c0            memw
400f3ad1:    2899          s32i.n    a9, a8, 8

In RELEASE configuration:
I2C[i2c_num]->command[p_i2c->cmd_idx].byte_num -= 0;
400f2ba2:    580572            l8ui    a7, a5, 88
400f2ba5:    747070            extui    a7, a7, 0, 8
400f2ba8:    0020c0            memw
400f2bab:    584572            s8i    a7, a5, 88

Looks like the compiler will make it a 8bit operation after optimisation.
But the register value changes from 0x901 to 0x101.
After this 8-bit optimisation, the 11th bit changed from 1 to zero, which caused this error.

We are still trying to find out why that happens, because there might be some risk when operating the register struct.
This is a workaround to avoid "-=" operation on I2C register struct fields.
2017-03-19 16:09:44 +08:00
wangmengyang
af843a9517 component/bt: remove the component esp_audio 2017-03-18 16:10:08 +08:00
wangmengyang
2a5d01a930 component/bt: clean up the A2DP sink example 2017-03-18 16:02:54 +08:00
wangmengyang
8ec94418de component/bt: clean up the API header and generate documentation files 2017-03-18 14:55:31 +08:00
wangmengyang
e132e95476 component/bt: format the new source files 2017-03-17 22:46:49 +08:00
wangmengyang
a849ce9942 component/bt: fix and move the a2dp-sink project 2017-03-17 21:31:59 +08:00
wangmengyang
007efdb852 Merge branch 'master' into feature/btdm_avrc 2017-03-17 21:04:18 +08:00
wangmengyang
1cf5a56896 component/bt: move API to set device name that can be used by both bt and ble applications 2017-03-17 19:16:52 +08:00
XiaXiaotian
a401169ea8 wpa2: add authenticate type for wpa2 enterprise 2017-03-17 17:28:01 +08:00
Wangjialin
7670e93639 Feature: add ledc low speed channels
1. Add low speed channels for LEDC module.
2. Improve fade object allocate mechanism.
3. Improve ledc example, add 2 low speed channels in example.
4. Remove debug code
5. Improve the register bit field name of slow clock.
2017-03-17 17:26:30 +08:00
wangmengyang
66fd3b9768 component/bt: add conditional compilation direvatives to control the source code building of SBC codec 2017-03-17 15:57:30 +08:00
wangmengyang
fda2e89a1e component/bt: add conditional compilation direvatives to control the source code building of classic bluetooth 2017-03-17 15:08:47 +08:00
Ivan Grokhotkov
57486a1f61 Merge branch 'bugfix/push_master_github' into 'master'
ci: Fix master branch being pushed to master

Previous change in 8b6993f7 doesn't work if branch exists locally.

See merge request !587
2017-03-17 14:21:45 +08:00
Angus Gratton
364476c1cd ci: Fix master branch being pushed to master
Previous change in 8b6993f7 doesn't work if branch exists locally.
2017-03-17 12:02:46 +08:00
wangmengyang
b2f52dd22e component/bt: add Kconfig option "CLASSIC_BT_ENABLED" 2017-03-16 22:32:27 +08:00
wangmengyang
aaf0cc00c4 component/bt: minor issue fixes for pre-merge
1. arrange the order of profile ID enums
2. add directory "external" and move SBC codec source into it
2017-03-16 16:48:39 +08:00
Ivan Grokhotkov
f784381c32 Merge branch 'bugfix/push_release_branches' into 'master'
build/CI: Push release branches to github

Previously CI deployment only pushed to master.

See merge request !579
2017-03-16 15:05:23 +08:00
Liu Zhi Fu
a8f9d99cae lwip: optimize dhcp renew/rebind timer 2017-03-16 09:46:43 +08:00
Ivan Grokhotkov
51323482b2 Merge branch 'feature/update_wifi_lib_for_some_fixs_and_features' into 'master'
esp32: update wifi lib for some bugfix/features

1. add options to disable nvs
2. add station keepalive with softap
3. fix beacon rx start time not accurate issue
4. set wifi rx desc/buffer boundary check to internal memory boundary

See merge request !578
2017-03-16 09:39:16 +08:00
Angus Gratton
8b6993f7aa build/CI: Push all allocated release branches to github
Previously CI deployment only pushed to master.
2017-03-15 17:36:41 +08:00
Ivan Grokhotkov
447ffb23d5 nvs: print page state as text in nvs_dump 2017-03-15 17:28:07 +08:00
Ivan Grokhotkov
4813ab2d28 examples: check return value of nvs_flash_init
nvs_flash_init may return an error code in some cases, and applications
should check this error code (or at least assert on it being ESP_OK, to
make potential issues more immediately obvious).

This change modifies all the examples which use NVS to check the error
code. Most examples get a simple ESP_ERROR_CHECK assert, while NVS
examples, OTA example, and NVS unit tests get a more verbose check which
may be used in real applications.
2017-03-15 10:44:54 +08:00
Angus Gratton
02fdf8271d Merge branch 'feature/idf_monitor' into 'master'
Expand  'make monitor' support

New 'make monitor' idf_monitor tool for better monitor output. Running 'make monitor' will now:
* Automatically look up code addresses via addr2line and print function, source file, line number in terminal.
* Can reset the ESP32 by typing Ctrl-T Ctrl-R.
* Can run "make flash" by typing Ctrl-T Ctrl-F.
* Can run "make app-flash" by typing Ctrl-T Ctrl-A.
* If gdb stub starts, monitor will automatically run gdb and connect. When gdb exits, ESP32 resets and monitor resumes.
* Exit is still Ctrl-[

Have some more features I'd like to add (log output to file, crash dump support) but I think this is at the point of being useful.


See merge request !565
2017-03-15 10:41:08 +08:00
Ivan Grokhotkov
829800f272 Merge branch 'bugfix/mbedtls_non_blocking_sockets' into 'master'
mbedtls port: Fix detection of EWOULDBLOCK/EAGAIN with non-blocking sockets

Previous code read non-blocking status via fcntl first, which resets errno.

* Closes #424 https://github.com/espressif/esp-idf/pull/424
* Merges #425 https://github.com/espressif/esp-idf/pull/425

See merge request !575
2017-03-15 10:39:53 +08:00
Ivan Grokhotkov
f59f13efd5 examples: remove nvs_flash_init from examples which do not use NVS 2017-03-14 22:03:40 +08:00
Ivan Grokhotkov
94b9898ca7 phy_init: move NVS init into relevant function, check errors
This change also modifies logging statements to print hexadecimal error codes, which are easier to look up.
2017-03-14 22:03:39 +08:00
Ivan Grokhotkov
5a23ec4dc4 nvs: check that storage has at least one free page
This change adds a check for the free page count to nvs_flash_init.
Under normal operation, NVS keeps at least one free page available,
except for transient states such as freeing up new page. Due to external
factors (such as NVS partition size reduction) this free page could be
lost, making NVS operation impossible. Previously this would cause an
error when performing any nvs_set operation or opening a new namespace.
With this change, an error is returned from nvs_flash_init to indicate
that NVS partition is in such a state.
2017-03-14 22:03:39 +08:00
Ivan Grokhotkov
817bbb4bf9 nvs: add missing error code descriptions 2017-03-14 22:03:39 +08:00
Ivan Grokhotkov
577290aaba Merge branch 'bugfix/mdns_security_issues' into 'master'
Bugfix/mdns security issues

Fixes a series of security issues with MDNS.

STACK-SMASH: dd3f18d2d8/components/mdns/mdns.c (L494):
The sprintf is not limited. We can execute the sprintf codeflow as
many times as we want, allowing arbitrary long data being written
into stack.

PACKET-OF-DEATH:
dd3f18d2d8/components/mdns/mdns.c (L502).
The compare allows equal, and thus jumping back to it self infinite
recursion -> guaranteed crash

TXT-SMASH: dd3f18d2d8/components/mdns/mdns.c (L1381)
The loop does not check on reaching a->txt maximum size (1024),
resulting in stack overflow.


See merge request !576
2017-03-14 21:42:06 +08:00
wangmengyang
a96df34d9b component/bt: recover the BLE buffer size macros 2017-03-14 21:00:58 +08:00
me-no-dev
c89e11c8fa address security issues with mDNS 2017-03-14 10:08:38 +02:00
wangmengyang
6cb9985e5d component/bt: merge the HCI packet reassemble logic modification 2017-03-14 15:34:56 +08:00
Ivan Grokhotkov
a9ed6d5a24 Merge branch 'bugfix/make_test_components' into 'master'
make: don’t override TEST_COMPONENTS

When idf_monitor is launched from make, it gets modified `TEST_COMPONENTS`
variable which contains full paths to the test components instead of the
names. This causes `TEST_COMPONENT_PATHS` to be empty and the unit test
app gets built without any test components.

This change introduces an internal `TEST_COMPONENTS_LIST` variable which
gets set either from `COMPONENTS` if `TESTS_ALL` is 1, or from
`TEST_COMOPONENTS` otherwise.
Bootloader makefile is also fixed to avoid propagating `TESTS_ALL` to the
bootloader build step.

See merge request !569
2017-03-14 15:16:51 +08:00
Ivan Grokhotkov
10f6f234ff Merge branch 'bugfix/fix_uart_stop_bit_2bit_error' into 'master'
bug fix: fix uart data bug when stop-bit is set as 2-bit mode

This is a workaround for a hardware bug.
When we want to use 2-stop-bit mode, we need to set stop-bit-1 and set dl1_en in rs485 register.

See merge request !544
2017-03-14 14:17:55 +08:00
Angus Gratton
2156408d45 Merge branch 'feature/aws_iot_sdk' into 'master'
Amazon AWS IoT SDK

Amazon IoT SDK component, plus two examples derived from their Linux samples.


See merge request !132
2017-03-14 10:21:08 +08:00
Liu Zhi Fu
67aabbff8f esp32: update wifi lib for some bugfix/features
1. add options to disable nvs
2. add station keepalive with softap
3. fix beacon rx start time not accurate issue
4. set wifi rx desc/buffer boundary check to internal memory boundary
2017-03-14 10:14:26 +08:00
wangmengyang
17696bc679 component/bt: resolve the differences with ESP-IDF master branch 2017-03-13 21:28:53 +08:00
Angus Gratton
da660b234c AWS IoT Device SDK Support
Use device cert/key embedded in firmware, or loaded from filesystem.
2017-03-13 17:23:29 +08:00
wangmengyang
383db0dc81 Merge branch 'master' into feature/btdm_avrc 2017-03-13 16:21:41 +08:00
Neil Kolban
16e1a2716e mbedtls port: Fix detection of EWOULDBLOCK/EAGAIN with non-blocking sockets
Previous code read non-blocking status via fcntl first, which resets errno.

Closes #424 https://github.com/espressif/esp-idf/pull/424
Merges #425 https://github.com/espressif/esp-idf/pull/425
2017-03-13 15:45:11 +08:00
Angus Gratton
5ddd229b95 Merge branch 'bugfix/unit_test_app_print_tests_in_correct_order' into 'master'
Fix unit test app to print tests in the same order they are given in test file

This fixes the unit test app to print test cases in the same order they are given in test file. 

See merge request !460
2017-03-13 15:43:01 +08:00