1. fix the bug that station can't found AP when the authmode is WPA
2. fix wifi mode error when mesh start after station has connected to router
Closes https://github.com/espressif/esp-idf/issues/12646
This commit deprecates the "freertos/xtensa_api.h" and "xtensa/xtensa_api.h"
include paths. Users should use "xtensa_api.h" instead.
- Replace legacy include paths
- Removed some unnecessary includes of "xtensa_api.h"
- Replaced some calls with "esp_cpu_..." equivalents
- Add warning to compatibility header
1. Avoid possible crash scenarios while forming datapath
2. Modify peer records structure thus fixing issues in datapath establishment
3. Fix timer out of bound issue causing "No timer handle" warning
4. Fix miscellaneous service discovery and datapath issues
- Fixes issue with connecting and discovering WEP APs
- Expsnds the reasons for trigerring a disconnect using
REASON_NO_AP_FOUND_WITH_COMPATIBLE_SECURITY
-- SAE-PK configured as compulsory in sta config but disabled for the AP
-- SAE-H2e configured as compulsory in sta config but disabled for an AP
that has authmode as WPA3-PSK or WPA3-WPA2-PSK.
-- Open AP found but we have set password or enabled enterprise mode.
-- SAE H2E only ap but we have SAE HnP setup in config.
-- WPA3-EXT_PSK AP but SAE-H2E disabled in config
Adds 3 more ddisconnect reasons in case of No AP found.
1. REASON_NO_AP_FOUND_IN_RSSI_THRESHOLD : AP rejected because it did
not meet rssi threshold.
2. REASON_NO_AP_FOUND_IN_AUTHMODE THRESHOLD : AP rejected because it
did not meet security threshold.
3. REASON_NO_AP_FOUND_WITH_COMPATIBLE_ SECURITY : AP rejected because
of incompatible security configuration. These situations could include
-- bss offerring WEP, but our password is not WEP compliant,
-- Encrypted AP bss but we have no password config set.
-- AP is Enterprise but we have not setup enterprise config and vice versa
Closes https://github.com/espressif/esp-idf/issues/5957
1.Optimize bin size for STA only mode
2.Change fragment threshold to 256
3.Support fragment for LR mode
4.Fix ampdu duration issue
5.Fix rx fragment fail in Open mode.
1.bringup c3 v1.1 and sync func to c3 eco7 rom
2.support to set null&probe lifetime
3.support to adjust listen interval to dtim period
4.support tx pkt w/o wake null
5.allow to tx null0 if requtest to rx data
- Fixes issue wheere beacon timeout would get triggerred multiple times
leading to a m f probe req.
- Fix missing PMKSA flush scenarios.
- Fix wrong AID assigned to station when multiple stations try to connect
simultaneously with mixed order of auth-request and assoc-request frames.
* All components which won't build (yet) on Linux are excluded.
This enables switching to Linux in an application without
explicitly setting COMPONENTS to main in the main
CMakeLists.txt.
* ESP Timer provides headers for Linux now
* automatically disabling LWIP in Kconfig if it is not available
doc(linux): brought section
"Component Linux/Mock Support Overview" up to date
1.fix multi antenna issue
2.fix dirty eb when rx HE rate action for C6
3.fix h/w modem state consecutive times when the modem sleep type is modified in runtime
Some component test apps do not use the "set(COMPONENTS main)" command in their
project level "CMakeLists.txt", thus leading to their builds pulling in all
ESP-IDF components.
This commit trims the build of multiple component test apps:
- Add "set(COMPONENTS main ...)" to project level "CMakeLists.txt"
- Add missing "PRIV_REQUIRES" in some "main" component "CMakeLists.txt"
Also removed repeated configuraiton options in legacy_i2c_driver/sdkconfig.ci.defaults
as they are already specified in legacy_i2c_driver/sdkconfig.defaults
-Merges the addition of extended caps IE for assoc req, probe resp
and beacons in a single place. This ensures that there are no
duplicate Extended Caps IE in the frame. Moves the capability
indication for BTM and HT20/40 from supplicant to wifi libs.
-Fix issue with frequent disconections when scanning for only a single
channel.
-Prints error message and returns ESP_ERR_NOT_SUPPORTED in case
esp32c2 tries to set bandwidth to HT40.
1. Added SOC caps dependency for enabling 192 bit security in wifi enterprise example
2. Fixed authmode in log and connected event for WPA3 enterprise 192 bit security
1. Update documentation for WPA3 Enterprise and WPA3 Enterprise 192-bit
mode
2. Update documentation for WPA3 OWE and OWE transition mode
3. Update documentation related to SAE PK, SAE PWE and Transition Disable
4. Update documnetation for wifi connect API
5. Fix config paramter information for wifi scan start
6. Fix documentation related to scan threshold config setting
7. Replace ESP_ERR_WIFI_ARG error code as ESP_ERR_INVALID_ARG
8. Update documentation for 802.11R Fast transition
1) Ignore immediate assoc req received from the station while we are
processing the older one
2) Create station mutex (sta->lock) only for stations connecting with wpa3
security
3) Fix regression caused by 4cb4faa9
Some APs are configured to hide the SSID, the length field of the SSID element
in the Beacon frame is set to 0. This can cause incorrect parsing of the Beacon
by the Wi-Fi MAC hardware.
Some APs send two beacon frames with different BSSID in a TBTT cycle. After
correctly parsing the beacon of the associated AP, it continue to receive the
other beacon frame, which will cause the MAC to remain in a wait RX/TXING
state, blocking the Wi-Fi go to sleep.
Enable FTM for ESP32C2 and update wifi libs with below fixes -
1. Bugfixes in Initiator and Responder mode
2. Fix wrong RTT value in first FTM procedure without connection
3. Update FTM calibration values for ESP32S2, S3, C3 and C2
4. Update distance estimation logic
5. Add some useful command parameters in FTM example
6. Fix bug when number of FTM measurement frames received is more
than (number_of_brusts * FTMs per brust).
Co-authored-by: Sarvesh Bodakhe <sarvesh.bodakhe@espressif.com>
1. Increase timeout value for NDP Accepted/Rejected events.
2. Update publisher ID incase publisher restarts(service).
3. Ignore service discovery frames with invalid/inactive service ID.
4. Update NAN documentation
1) Fix issue during split scan to allow for data tx.
2) Fix issue when parsing wpa_ie to set correct authmode when AP
supports both WPA_EAP and WPA_EAP_SHA256 authmode.
Closes https://github.com/espressif/esp-idf/issues/11202
3) Fix an occasional crash during sta roam.
4) Add home_channel_dwell_time to wifi_scan_config_t. This allows
configuration of the time spent between scanning consecutive
channels for tx.
2. Remove user configurable flag fsd_reqd from NAN publish config
3. Fix issue wherein NDL of previously cancelled service is obtained in peer record of new service with no NDL
Executing supplicant WIFI_EVENT_STA_CONNECTED and WIFI_EVENT_STA_DISCONNECTED handlers in event-handler context can lead to concurrency issues.
Moving the functionality into 'wpa_sta_connected_cb' and 'wpa_sta_disconnected_cb' callbacks and execute in ppTask context.
1) Set NVS PMF required true if not specified by application when
authmode is WPA3
2) Fix issue regarding cleanup of non associated sta_info
3) Fix implementation of sta lock to avoid concurrency issues
4) Fix softAP deinit crash when password is configured with max length
esp_wifi: add dynamic carrier sense threshold to improve tx throughput in high interference env and fix tx fragment issue
Closes WIFI-5106 and WIFI-5529
See merge request espressif/esp-idf!21919
Update wifi lib with below -
1. Create NAN Discovery SM for beaconing & cluster formation
2. Create NAN interface for Tx/Rx of beacons & action frames
3. Add commands & events for NAN Services Publish/Subscribe/Followup
4. Add NAN Datapath definitions, Events, Peer structures
5. Support for forming and parsing of Datapath related attributes
6. Modules for NDP Req, Resp, Confirm, Term, Peer management
7. NAN Interface related additions in Datapath, Data Tx Q's
In addition include below changes -
1. Add netif and driver support for NAN Interface
2. Add simple examples for Publisher-Subscriber usecases
3. Add an advanced console example that supports commands
for NAN Discovery, Services & Datapath
4. Add wifi_apps for providing better NAN API's and Peer management
Co-authored-by: Shyamal Khachane <shyamal.khachane@espressif.com>
modem retention: Support esp32c6 wifi MAC and baseband sleep retention
sleep_modem: wifi MAC modem wakeup protect in modem state before PMU trigger sleep enable request
sleep modem: provide a interface to get whether the Modem power domain is allowed to power off during sleep
add i2c_ana master header file to project
auto beacon: release PMU's lock on root clock source (it is locked in the PLL)
wifi receiving beacon frame in PMU modem state strongly depends on the BBPLL
clock, PMU will forcibly lock the root clock source as PLL, when the root
clock source of the software system is selected as PLL, we need to release
the root clock source locking.
When it is judged that the PLL is locked by PMU after wakeing up from the PMU
modem state, switch the root clock source to the PLL in the sleep process (a
critical section).
auto beacon: fix the failure to receive broadcast/multicast frames in modem state
When the multicast field in the beacon frame received in the PMU modem state is
True, the PMU switches to the PMU active state (the PMU waits for the HP LDO to
stabilize and then restores the MAC context) and starts to receive
broadcast/multicast frames (Broadcast/Multicast frames will be sent after a
minimum delay of 48 us after the beacon frame), because the PMU waits for the HP
LDO to stabilize too long (~154 us), which will cause broadcast/multicast frame
reception to be missed.
auto beacon: select the PLL clock source as the REGDMA backup clock source when the PMU switches to ACTIVE from MODEM state
update Digital Peripheral (M2A switch) REGDMA restore time parameter
auto beacon: fix the issue that only channel 1 can connect to AP in modem state
1) station: send deauth while going from assoc to init, if reason is assoc timeout
2) softAP pmf: do not drop open deauth/disassoc if keys are not generated
3) softAP pmf: improvements in SA query handling
