Commit Graph

7619 Commits

Author SHA1 Message Date
Piyush Shah
f677655fcb protocomm_httpd: Restart security session if request is received on a new session
This commit fixes a bug as well as changes a behaviour.

Bugfix: During softap/httpd based provisioning, if a session was closed
midway and a new one started, it would never proceed if the http server
assigns same socket number to the new session (which happens almost always).
Now, if a session is closed, using the http callbacks, the older session
data is cleared so that a new one can be created.

Behavioural change: If a client (mobile app particularly) does not use
persistent http session i.e. all provisioning communication on the same
socket, the provisioning may fail. Earlier, since the session context was
not getting cleared, even if the client closed a session and continued
on a new one, it would go through if the socket number assigned was same
(which happens almost always).

Ideally, from a security perspective, all communication related
to secure provisioning must happen on the same socket, and so, this
change is required.
2020-06-10 01:25:53 +05:30
David Čermák
ccdd06937f Merge branch 'feature/pin_ethernet_task_to_core_v4.0' into 'release/v4.0'
ethernet: support pin emac task to core (v4.0)

See merge request espressif/esp-idf!9038
2020-06-08 13:47:07 +08:00
Michael (XIAO Xufeng)
f16a37d439 Merge branch 'bugfix/fix_fifo_cnt_bug_v4.0' into 'release/v4.0'
bugfix(uart): fix esp32 uart fifo_cnt bug(backport v4.0)

See merge request espressif/esp-idf!9041
2020-06-08 13:25:58 +08:00
Jiang Jiang Jian
a864e3dcfe Merge branch 'bugfix/authmode_degrade_fix_v4.0' into 'release/v4.0'
esp_wifi: Remove auth_changed event and fix wpa2_ent authmode threshold (backport 4.0)

See merge request espressif/esp-idf!8806
2020-06-08 11:22:10 +08:00
Michael (XIAO Xufeng)
ef8613b7f7 Merge branch 'bugfix/sdmmc_check_slot_before_pullup_4.0' into 'release/v4.0'
sdmmc: Correctly check function parameters before using them (4.0)

See merge request espressif/esp-idf!9056
2020-06-08 10:24:59 +08:00
kapil.gupta
d008eba708 esp_wifi: Remove auth_changed event and fix wpa2 authmode threshold
Added following as part of this change
1. Removed auth_changed event
2. Updated doc regarding usage of  WPA/WEP secuiry modes
3. Fixed WPA2 enterprise authmode threshold.
2020-06-07 10:55:02 +05:30
Piyush Shah
ad95174a7a esp_http_server: Fixed a bug which could cause issues with LRU purge
LRU counter should be started from 1, and not 0, so that all checks
work fine.

Closes https://github.com/espressif/esp-idf/issues/4753
2020-06-05 09:24:06 +00:00
Jiang Jiang Jian
1ad7e276d9 Merge branch 'workaround/wps_iot_fixes_v4.0' into 'release/v4.0'
wpa_supplicant: WPS Inter operatability Fixes( backport v4.0)

See merge request espressif/esp-idf!8951
2020-06-05 13:50:27 +08:00
Angus Gratton
84d6d48fe0 wpa_supplicant: Allow building with mbedTLS integration but no hardware MPI
Closes https://github.com/espressif/esp-idf/issues/5321
2020-06-04 18:32:58 +10:00
KonstantinKondrashov
51bb86f0a6 partition_table: Fix parttool.py crashes when retrieving partition info
Closes: IDFGH-3279
Closes: https://github.com/espressif/esp-idf/issues/5271
2020-06-04 16:31:26 +08:00
Alexander Borsuk
7eaea6c726 sdmmc: Correctly check function parameters before using them
Closes https://github.com/espressif/esp-idf/pull/5000
2020-06-04 12:01:59 +08:00
kapil.gupta
9746fa569c wpa_supplicant: WPS Inter operatability Fixes
Add WPS IOT fixes under config option

Current fixes under this flag.
1. Allow NULL-padded WPS attributes.
2. Bypass WPS-Config method validation
2020-06-03 13:33:49 +00:00
Nachiket Kukade
40385ea454 wpa_supplicant: Allow NULL-padded WPS attributes
Some AP's keep NULL-padding at the end of some variable length WPS
Attributes. This is not as par the WPS2.0 specs, but to avoid interop
issues, ignore the padding by reducing the attribute length by 1.
2020-06-03 13:33:49 +00:00
morris
d96d68ea38 ethernet: support pin emac task to core 2020-06-03 19:54:22 +08:00
Island
9718338984 Merge branch 'bugfix/ble_mesh_remove_relay_dependency_v4.0' into 'release/v4.0'
ble_mesh: Remove relay option dependency (v4.0)

See merge request espressif/esp-idf!9027
2020-06-03 15:20:51 +08:00
Island
5a61c4c24c Merge branch 'bugfix/ble_mesh_example_nvs_store_v4.0' into 'release/v4.0'
Bugfix/ble mesh example nvs store (v4.0)

See merge request espressif/esp-idf!9017
2020-06-03 15:12:17 +08:00
Island
ceffc0837e Merge branch 'bugfix/ble_mesh_model_recv_fix_v4.0' into 'release/v4.0'
Bugfix/ble mesh model recv fix (v4.0)

See merge request espressif/esp-idf!9008
2020-06-03 15:11:32 +08:00
Island
ece24128da Merge branch 'bugfix/ble_mesh_rework_prov_pdu_len_check_v4.0' into 'release/v4.0'
ble_mesh: Rework prov pdu length check (v4.0)

See merge request espressif/esp-idf!9004
2020-06-03 15:10:52 +08:00
xiongyu
f75088d40d bugfix(uart): fix esp32 uart fifo_cnt bug
When using DPort to read fifo, fifo_cnt is not credible, we need to calculate the real cnt based on the fifo read and write pointer. When using AHB to read FIFO, we can use fifo_cnt to indicate the data length in fifo.
2020-06-03 12:29:06 +08:00
lly
19f69333f7 ble_mesh: Remove relay option dependency
When the relay functionality of a node is not enabled, this
issue will cause the node failing to send messages to fixed
group.
2020-06-02 19:18:52 +08:00
Jiang Jiang Jian
695ad84654 Merge branch 'bugfix/fix_some_wifi_bugs_0522_v4.0' into 'release/v4.0'
feature: optimize some wifi API (backport v4.0)

See merge request espressif/esp-idf!8878
2020-06-02 17:39:15 +08:00
lly
b55020ad80 ble_mesh: Config and health client btc fixes
Fix an issue which may cause no error code is returned
when sending config client or health client messages
with invalid parameters.
2020-06-02 14:04:35 +08:00
lly
1ac6d48fcf ble_mesh: Add more checks of net_idx & app_idx 2020-06-02 14:04:35 +08:00
lly
268f5ad6c6 ble_mesh: Optimize some send & recv logs 2020-06-02 14:04:34 +08:00
lly
205425b86b ble_mesh: correct the return type [Zephyr] 2020-06-02 10:32:25 +08:00
lly
c2589b0b57 ble_mesh: Add net_buf_simple_init_with_data [Zephyr] 2020-06-02 10:32:24 +08:00
lly
f990d725f4 ble_mesh: Optimize model recv operations [Zephyr]
Previously the model recv operation is a littl fuzzy.
With the changes, the model recv operation is splitted into:
- find op
- check app_idx
- check dst
- check length
- update info & handle message
2020-06-02 10:32:23 +08:00
lly
073b8daa6e ble_mesh: Rework prov pdu length check 2020-06-02 10:14:50 +08:00
ronghulin
b571992626 feature: optimize some wifi API
1. optimization esp_wifi_set_max_tx_power description
2. Add API esp_wifi_ap_get_sta_aid
2020-06-01 11:07:49 +08:00
lly
cd40f3ad52 ble_mesh: Local model (un)subscribes group address 2020-06-01 09:11:27 +08:00
lly
11cfb44e58 ble_mesh: Define a macro for invalid company id 2020-06-01 09:11:26 +08:00
Jiang Jiang Jian
c00fe4c53c Merge branch 'bugfix/wpa3_auth_coex_issue_v4.0' into 'release/v4.0'
Fix WPA3 Auth issue in coex scenario (backport v4.0)

See merge request espressif/esp-idf!8838
2020-05-29 18:05:43 +08:00
Jiang Jiang Jian
569575b404 Merge branch 'bugfix/fix_spi_flash_clock_config_error_v4.0' into 'release/v4.0'
flash: fix spi flash clock config error (backport v4.0)

See merge request espressif/esp-idf!8515
2020-05-29 12:46:04 +08:00
Angus Gratton
2f15eacdeb Merge branch 'bugfix/heap_psram_fill_v4.0' into 'release/v4.0'
heap: Only fill new heaps with FREE_FILL_PATTERN if Comprehensive poisoning is on (v4.0)

See merge request espressif/esp-idf!8491
2020-05-29 12:43:45 +08:00
Jiang Jiang Jian
193e9c0d5a Merge branch 'bugfix/add_so_linger_to_menuconfig_for_4.0' into 'release/v4.0'
lw-ip:add so linger to menuconfig for 4.0(backport4.0)

See merge request espressif/esp-idf!8759
2020-05-29 11:15:26 +08:00
Jiang Jiang Jian
5c2ed3af0e Merge branch 'bugfix/fix_memleak_in_wpa3_feature_v4.0' into 'release/v4.0'
fix(wpa_supplicant): fix memleak in wpa3 feature (backport v4.0)

See merge request espressif/esp-idf!8655
2020-05-29 11:14:36 +08:00
Jiang Jiang Jian
6b5c89b684 Merge branch 'bugfix/ble_mesh_check_timer_init_v4.0' into 'release/v4.0'
ble_mesh: Check the result of creating timer (v4.0)

See merge request espressif/esp-idf!8959
2020-05-28 15:27:21 +08:00
Jiang Jiang Jian
a5ffd527ab Merge branch 'nimble/update_nimble_submodule_v4.0' into 'release/v4.0'
NimBLE: Include upstream fixes and use macros for log level filtering (backport v4.0)

See merge request espressif/esp-idf!8795
2020-05-28 15:24:45 +08:00
lly
792605e8fd ble_mesh: Check the result of creating timer 2020-05-28 10:27:25 +08:00
Island
59e11421bf Merge branch 'bugfix/ble_mesh_sync_zephyr_fixes_v4.0' into 'release/v4.0'
Bugfix/ble mesh sync zephyr fixes (v4.0)

See merge request espressif/esp-idf!8949
2020-05-28 10:16:52 +08:00
Island
a90e8d67e9 Merge branch 'bugfix/ble_mesh_not_use_same_private_key_v4.0' into 'release/v4.0'
ble_mesh: Not using pre-initialized private key (v4.0)

See merge request espressif/esp-idf!8946
2020-05-28 10:14:45 +08:00
Nachiket Kukade
9e21c09a11 esp_wifi: Update wifi lib
Fix WPA3 Auth issue in coex scenario
2020-05-27 19:44:39 +05:30
lly
63c83730c2 ble_mesh: Transport tx fields overflow [Zephyr]
The transport segmented TX nack and seg_pending fields must be at least
6 bits to avoid overflow for 32 segment messages. This change rearranges
the seg_tx fields to gather all state flag fields in one byte, while
making the counter fields whole bytes.
2020-05-27 17:45:55 +08:00
lly
f781c6edac ble_mesh: Friend with unknown appkey [Zephyr]
Ensures that friend messages are enqueued, even if the packet is
received with an appkey is unknown to the friend. Previously, sdu_recv
would return EINVAL if the appkey was unknown, which would prevent the
lower transport layer from adding the packet to the friend queue. This
is irrelevant for the logic in lower transport, and should not be
returned as an error.
2020-05-27 17:45:49 +08:00
lly
7078065980 ble_mesh: Not using pre-initialized private key 2020-05-27 17:39:35 +08:00
lly
a8afd951dc ble_mesh: Same func for storing/restoring comp data 2020-05-27 17:31:01 +08:00
Island
652e5352ee Merge branch 'bugfix/ble_mesh_uses_deprecated_config_v4.0' into 'release/v4.0'
ble_mesh: Fix using old config for duplicate scan (v4.0)

See merge request espressif/esp-idf!8901
2020-05-27 17:24:26 +08:00
Jiang Jiang Jian
20c34cac2d Merge branch 'bugfix/fix_some_wifi_bugs_0427_v4.0' into 'release/v4.0'
Bugfix/fix some wifi bugs 0427 (v4.0)

See merge request espressif/esp-idf!8571
2020-05-27 14:45:04 +08:00
chenjianqiang
e0a70b0675 flash: fix spi flash clock config error
Closes https://github.com/espressif/esp-idf/issues/5099
2020-05-27 04:38:40 +00:00
Angus Gratton
e93405c3a7 Merge branch 'bugfix/heap_trace_invalid_addr_v4.0' into 'release/v4.0'
heap: fix backtrace termination (v4.0)

See merge request espressif/esp-idf!8420
2020-05-27 07:49:01 +08:00
Mahavir Jain
798cc4deb7 Merge branch 'bugfix/pthread_tcb_cleanup_wrapper_v4.0' into 'release/v4.0'
Fix linking for vPortCleanUpTCB wrapper (v4.0)

See merge request espressif/esp-idf!8702
2020-05-26 11:48:42 +08:00
Mahavir Jain
254967eea5 Merge branch 'bugfix/wifi_prov_not_stopping_v4.0' into 'release/v4.0'
wifi_provisioning: Catch the Wi-Fi events even after Connection errors (v4.0)

See merge request espressif/esp-idf!8608
2020-05-26 11:48:15 +08:00
Angus Gratton
457e1160bc Merge branch 'task/update_idf_version_v401' into 'release/v4.0'
version: Update to v4.0.1

See merge request espressif/esp-idf!8887
2020-05-26 07:38:09 +08:00
David Čermák
d6a2f9841d Merge branch 'feature/config_mqtt_task_prio_v4.0' into 'release/v4.0'
esp_mqtt: configure task priority, esp_mqtt_abort_connection race condition, clenaup logs and docs (v4.0)

See merge request espressif/esp-idf!8473
2020-05-26 03:37:13 +08:00
David Čermák
d9f4cb89a4 Merge branch 'bugfix/ws_client_fragmented_send_v4.0' into 'release/v4.0'
ws_client: fix fragmented send setting proper opcodes (v4.0)

See merge request espressif/esp-idf!8691
2020-05-25 17:19:42 +08:00
lly
9d5ea68c61 ble_mesh: Fix using old config for duplicate scan 2020-05-25 16:54:03 +08:00
Michael (XIAO Xufeng)
1ab129891a Merge branch 'bugfix/erase_with_vtaskdelay_v4.0' into 'release/v4.0'
spi_flash: Add vTaskDelay while a long erasing (v4.0)

See merge request espressif/esp-idf!8599
2020-05-25 14:29:26 +08:00
Angus Gratton
a748457a70 version: Update to v4.0.1 2020-05-25 14:05:55 +10:00
xueyunfei
15916dfbec add LINGER to menuconfig 2020-05-25 11:31:38 +08:00
Island
57932baef3 Merge branch 'bugfix/ble_mesh_provisioner_fail_to_pub_v4.0' into 'release/v4.0'
ble_mesh: Fix Provisioner failed to publish (v4.0)

See merge request espressif/esp-idf!8874
2020-05-22 19:14:26 +08:00
Island
4c5fd2be70 Merge branch 'bugfix/ble_mesh_friend_init_flag_v4.0' into 'release/v4.0'
Bugfix/ble mesh friend init flag (v4.0)

See merge request espressif/esp-idf!8869
2020-05-22 19:13:42 +08:00
Island
7a60ae4bc8 Merge branch 'bugfix/ble_mesh_remove_patch_v4.0' into 'release/v4.0'
ble_mesh: Remove patch for the bug of an App (v4.0)

See merge request espressif/esp-idf!8868
2020-05-22 19:13:24 +08:00
Island
7f049cd5dc Merge branch 'bugfix/ble_mesh_fix_typos_v4.0' into 'release/v4.0'
ble_mesh: Fix typos (v4.0)

See merge request espressif/esp-idf!8867
2020-05-22 19:13:05 +08:00
lly
699270e09e ble_mesh: Fix Provisioner failed to publish 2020-05-22 15:48:49 +08:00
David Cermak
ee51d336d3 mqtt: clenaup logs and docs, esp_mqtt_abort_connection race condition
esp_mqtt_abort_connection: Fixed an issue which could result in a race condition and subsequent crash

esp_mqtt: Change an error print to use ESP_LOGE instead of ESP_LOGI
Move Sending MQTT connect message log from Info to Debug level
docs: Makes clear that publish API could block
Change the message printed after MQTT connection failure
2020-05-22 06:21:25 +00:00
Simon Brélivet
d7310ae008 esp_mqtt: add option to configure mqtt task priority.
Merges https://github.com/espressif/esp-idf/pull/4947
2020-05-22 06:21:25 +00:00
David Cermak
55dd3c8b77 ws_client: fix fragmented send setting proper opcodes
Previous implementation violated the RFC by having both the actual opcode and WS_FIN flag set for all fragments of a message.
Fixed by setting the opcode only for the first fragment and WS_FIN for the last one

Closes IDFGH-2938
Closes https://github.com/espressif/esp-idf/issues/4974
2020-05-22 06:11:44 +00:00
David Čermák
7b01509b19 Merge branch 'bugfix/stop_mac_can_be_controlled_by_user_v4.0' into 'release/v4.0'
Bugfix/stop mac can be controlled by user v4.0

See merge request espressif/esp-idf!8762
2020-05-22 14:07:48 +08:00
KonstantinKondrashov
754f59fba7 spi_flash(new driver): Add a Kconfig option - Bypass a block erase and always do sector erase
Closes: IDF-1561
2020-05-22 05:07:20 +00:00
KonstantinKondrashov
9926b875d8 spi_flash(LEGACY_IMPL): Add a Kconfig option - Bypass a block erase and always do sector erase
Closes: IDF-1561
2020-05-22 05:07:20 +00:00
KonstantinKondrashov
79831e64fd spi_flash: Add into sim/stubs the esp_timer 2020-05-22 05:07:20 +00:00
KonstantinKondrashov
a128eae7b8 spi_flash(new driver): Add vTaskDelay while a long erasing 2020-05-22 05:07:20 +00:00
KonstantinKondrashov
98ac272a3f spi_flash(LEGACY_IMPL): Add vTaskDelay while a long erasing
Added Kconfig options to enable yield operation during flash erase

Closes: https://github.com/espressif/esp-idf/issues/2083
Closes: https://github.com/espressif/esp-idf/issues/4916
Closes: IDFGH-261
2020-05-22 05:07:20 +00:00
lly
13167a7579 ble_mesh: Clear two more vars during proxy server deinit 2020-05-22 11:39:51 +08:00
lly
acf41f93a9 ble_mesh: Add missing sdkconfig.h 2020-05-22 11:39:51 +08:00
lly
470c959b04 ble_mesh: Init device name during proxy server init
Device name will be reset when deinit mesh stack. If not
initializing device name during the next mesh stack init,
it will fail to set the device name when using bluedroid.
2020-05-22 11:39:50 +08:00
lly
dd7c98d6c2 ble_mesh: Add init flag for friend init/deinit
Since bt_mesh_friend_init() will only be invoked when
a device is provisioned or Provisioner is enabled, so
we add a flag to indicate if the friend functionality
is initialized in case deinit before initialization.
2020-05-22 11:39:49 +08:00
lly
90aa79fd2b ble_mesh: Remove patch for the bug of an App 2020-05-22 11:37:30 +08:00
lly
97c1a4b5c6 ble_mesh: Fix typos 2020-05-22 11:34:07 +08:00
Island
5897354d7f Merge branch 'bugfix/sync_zephyr_bt_mesh_bugfix_v4.0' into 'release/v4.0'
Bugfix/sync zephyr bt mesh bugfix (v4.0)

See merge request espressif/esp-idf!8853
2020-05-22 10:50:39 +08:00
Island
6c99fdceb2 Merge branch 'bugfix/ble_mesh_node_old_version_to_new_v4.0' into 'release/v4.0'
ble_mesh: Fix mesh node device role restore (v4.0)

See merge request espressif/esp-idf!8854
2020-05-22 10:50:09 +08:00
Michael (XIAO Xufeng)
6fe46c1798 Merge branch 'bugfix/timer_group_intr_enable_v4.0' into 'release/v4.0'
Fix timer group intr enable (backport v4.0)

See merge request espressif/esp-idf!8530
2020-05-21 17:42:02 +08:00
lly
d2bcb5c7ff ble_mesh: A specific fix for compile warning in idf4.0
Compared with the latest idf, idf4.0 defines BIT(nr) in
the "esp_bit_defs.h" without the pre-condition "#ifndef BIT",
which will cause compile warning when using mesh. So we
include the header file "soc/soc.h" in "mesh_util.h",
which can bypass the definition of "BIT" in "mesh_util.h"
when compiling.
2020-05-21 16:50:09 +08:00
lly
2ea69e6df5 ble_mesh: Fix mesh node device role restore
Old version of BLE Mesh has no device role storage, because
previously we only support storing mesh node info.
If the binary of the node is upgraded from old version to a
new version (support storing provisioner info), the mesh info
of the node will not be restored because mesh role does not
exist in the flash.
2020-05-21 15:26:50 +08:00
lly
b5bd1bf67e ble_mesh: Fix not update prov addr in fast prov
When using fast provisioning, the Provisioner functionality
will be enabled. Unicast addresses within the pre-allocated
range will be used for provisioning nodes. And during the
address assignment, the allocated unicast address will be
checked that if it's duplicated with other nodes addresses
and the Provisioner's own addresses.
So before starting using fast provisioning, we need to update
the Provisioner address.
2020-05-21 15:22:21 +08:00
lly
8294055c65 ble_mesh: net_key_status only pull one key idx [Zephyr]
Fixes bug where the config client's net_key_status handler would attempt
to pull two key indexes from a message which only holds one.
2020-05-21 15:22:21 +08:00
lly
11286e35a2 ble_mesh: Update client message timeout calculation
Since the behavior of sending segmented messages has been
changed properly, the calculation of timeout value which
will be used when sending an acknowledged message by a
client model also needs to be updated.
2020-05-21 15:22:20 +08:00
lly
2c5b0a523a ble_mesh: Add lock for segmented msg operations
Add mutex to protect some variables of the mesh segmented
messages.
Currently the timeout handler of mesh will be executed in
the btc task, while the received mesh messages will be
handled in the btu task. In case some variables are set to
NULL when handled in the btu task, meanwhile these variables
are also accessed in the timeout handler, so we add mutex to
protect these variables and related operations.
2020-05-21 15:22:19 +08:00
lly
8c6f6318c0 ble_mesh: Fix dereferencing pointer before checking for NULL [Zephyr]
The publication context is checked for NULL in bt_mesh_model_publish()
however it was dereferenced before that. Move the assignment to
ctx.send_rel to the same place where other ctx members are set.
2020-05-21 15:22:18 +08:00
lly
632d9739b5 ble_mesh: Optimize some mesh log output 2020-05-21 15:22:18 +08:00
lly
34cb56b7aa ble_mesh: Fix restore when revoke keys [Zephyr]
Store keys (NetKey and AppKey) again after revoking.
2020-05-21 15:22:17 +08:00
lly
7c12074801 ble_mesh: Spit mesh_util.h into different header files
Split mesh_util.h into mesh_byteorder.h, mesh_compiler.h,
mesh_ffs.h and mesh_util.h based on the classification of
Zephyr, which will make further porting more clear.
2020-05-21 15:22:16 +08:00
lly
4b21a34675 ble_mesh: Split mesh os related into a separate file 2020-05-21 15:22:13 +08:00
lly
ac51ec11ec ble_mesh: Split mesh mutex into a separate file 2020-05-21 15:19:52 +08:00
lly
7db10be193 ble_mesh: Rename mesh_kernel.* to mesh_timer.* 2020-05-21 15:19:51 +08:00
lly
fde075aec2 ble_mesh: Add and use transport macro definitions [Zephyr] 2020-05-21 15:19:51 +08:00
lly
cbd2bcfbd2 ble_mesh: Friend SeqAuth cleanup [Zephyr]
The Friend queue uses the message SeqAuth to determine whether the
message is already in the queue. To facilitate this, the SeqAuth is
passed around as a pointer throughout the transport modules. In the
bt_mesh_ctl_send functions, this parameter is also exposed in the API,
but the internal usage is inconsistent and buggy. Also, no one actually
uses this parameter.

- Removes seq_auth param from bt_mesh_ctl_send, instead passing NULL
  directly to the friend module, to enforce its addition to the queue.
- Makes the seq_auth pointer const throughout the friend module.
2020-05-21 15:19:50 +08:00
lly
5c5621790a ble_mesh: Rework msg_cache [Zephyr]
Changes the behavior of the message cache to optimize for cache
capacity. Previously, the message cache's primary function was to avoid
decrypting messages multiple times, although the cache's main function
in the spec is to avoid message rebroadcasting. Optimizing for minimal
decryption causes us to fill the network cache faster, which in turn
causes more cache misses, potentially outweighing the advantage.

Now stores src + seq in message cache instead of field hash value. This
cuts cache size in two, while including more of the sequence number than
before.

Adds messages to the cache only after the packet is successfully
decrypted. This reduces noise in the cache, and ensures that no
invalid deobfuscations are added.

Additionally, this fixes a bug where multiple calls to net_decrypt with
the same packet failed, as the message cache found its own entry from
the previous call.
2020-05-21 15:19:49 +08:00
lly
fbdb7ff665 ble_mesh: Segmented TX to groups [Zephyr]
Implements several changes to the transport layer segmented tx to
improve group message performance:
- Moves retransmit counter to tx context instead of per packet. As every
  unacked packet is sent every retransmit, the retransmit counters would
  be the same in each segment. This makes it easier to control progress.
- Delays the scheduling of the retransmit until the completion of the
  last segment by adding a seg_pending counter. This is essentially the
  same as the old behavior, except that the old behavior might retrigger
  the sending before all segments are finished if the advertising is
  slow.
- Allows the group transmits to stop as soon as all retransmits have
  been exhausted, instead of timing out waiting for acks that won't
  come. This allows group tx to finish without error.
- Fixes a bug where a failed TX would block IV update.
- Cancels any pending transmissions of acked segments.
- Reduces log level for several common group tx scenarios that aren't
  erronous.
2020-05-21 15:19:49 +08:00
lly
bbfaaa2044 ble_mesh: Add comment explaining use of byte order [Zephyr]
Add comment that explains why a different byte order is used for the
3-byte opcode on the CID part of the opcode.
2020-05-21 15:19:48 +08:00
lly
ad14507e3f ble_mesh: Use 24-bit functions [Zephyr]
Use 24-bit functions for byteorder and net_buf in order to make the
byteorder used more readable.
2020-05-21 15:19:47 +08:00
lly
c9d1255ce4 ble_mesh: Optimize net_buf_simple routines [Zephyr]
Use sys_put_xyz() helpers instead of memcpy() whenever possible. This
brings in straight-line inline code for pushes and adds of known,
small sizes.
2020-05-21 15:19:46 +08:00
lly
25569cd9de ble_mesh: Add PRIu64 & PRIx64 in mesh_types.h 2020-05-21 15:19:46 +08:00
lly
416e8958fa ble_mesh: Add push functions for supported bit-variants [Zephyr]
Add push functions for bit-widths supported by add and pull functions.
2020-05-21 15:19:45 +08:00
lly
cde1592bf3 ble_mesh: Add support for 64 bit data type [Zephyr]
This enables pulling and pushing values in 64 bit format.
2020-05-21 15:19:44 +08:00
lly
0af05fdee1 ble_mesh: Add support for 48 bit data type [Zephyr]
This enables pulling and pushing values in 48 bit format.
2020-05-21 15:19:44 +08:00
lly
4536a485be ble_mesh: Add 48 bit variants [Zephyr]
This adds sys_*_*48 functions that operation on a 48 bits values.
2020-05-21 15:19:43 +08:00
lly
e7d37f2d1a ble_mesh: Add support for 24 bit data type [Zephyr]
This enables pulling and pushing values in 24 bit format.
2020-05-21 15:19:42 +08:00
lly
fd17ff2f0b ble_mesh: Add 24 bit variants [Zephyr]
This adds sys_*_*24 functions that operation on a 24 bits values.
2020-05-21 15:19:41 +08:00
lly
e322c5950b ble_mesh: Group resends in proxy nodes [Zephyr]
Resend transport segments for groups on the advertiser interface, even
if a connected proxy node holds the group.
2020-05-21 15:19:41 +08:00
lly
1f96a6f35d ble_mesh: Typo in condition in comp_add_elem of cfg_srv [Zephyr]
Vendor model IDs take up four (not two) bytes in the composition
2020-05-21 15:19:40 +08:00
lly
4fddf1156b ble_mesh: GATT Proxy Spec 1.0.1 changes [Zephyr]
Backport of https://github.com/apache/mynewt-nimble/pull/724

Mesh spec 1.0.1 changes proxy disabling behavior to only affect the
relaying from proxy nodes. Previously, disabling proxy would shut down
all proxy and node activity.

Tweaks from the original commit:
- Removed redundant call to bt_mesh_adv_update() in gatt_proxy_set()
- Removed invalid ref to 4.2.11.1 in node_identity_set()

---

According to Mesh Profile Spec 1.0.1, Section 4.2.11:
"If the Proxy feature is disabled, a GATT client device can connect
over GATT to that node for configuration and control. Messages from
the GATT bearer are not relayed to the advertising bearer."

Moreover some notes have been removed from the spec compared to
version 1.0:

Mesh Profile Spec 1.0, Section 4.2.11:

"Upon transition from GATT Proxy state 0x01 to GATT Proxy state 0x00
the GATT Bearer Server shall disconnect all GATT Bearer Clients."

"The Configuration Client should turn off the Proxy state as the last
step in the configuration process."

Mesh Profile Spec 1.0, Section 4.2.11.1:

"When the GATT Proxy state is set to 0x00, the Node Identity state
for all subnets shall be set to 0x00 and shall not be changed."
2020-05-21 15:19:39 +08:00
lly
833483bb22 ble_mesh: Support reliable sending when publishing [Zephyr]
Until now the choice of reliable sending (segmented messages with
acks) was implicitly dependent on the size of the payload. Add a new
member to the bt_mesh_model_pub to force using segment acks even when
the payload would fit a single unsegmented message.
2020-05-21 15:19:39 +08:00
lly
3d4948664b ble_mesh: Check device uuid when init provisioning 2020-05-21 15:19:38 +08:00
lly
203f871420 ble_mesh: Fix provisioning buffer initialization [Zephyr]
When PB-GATT support has been enabled the provisioning code "borrows"
the buffer from the proxy code. However, the way that initialization
was happening the proxy buffers were initialized only after
provisioning initialization, resulting in a corrupted buffer with
buf->data pointing to NULL. Reorder the initialization calls so that
proxy is done first and provisioning only after it.
2020-05-21 15:19:37 +08:00
lly
2c6a3f9e5b ble_mesh: Skip publish if update fails [Zephyr]
Allow models to skip a periodic publish interval by returning an error
from the publish update callback.

Previously, an error return from publish update would cancel periodic
publishing. This can't be recovered from, and as such, no valid model
implementation could return an error from this callback, and there was
no way to skip a periodic publish.
2020-05-21 15:19:36 +08:00
lly
2b6131b5f4 ble_mesh: Enable Segmented Control Messages [Zephyr]
The function bt_mesh_ctl_send() used to support maximum length of
11 bytes. The segmentation complies with the BLE Mesh Standard.
The ack is disabled in case of non unicast address.
2020-05-21 15:19:36 +08:00
Island
793d2b11f1 Merge branch 'bugfix/ble_mesh_not_ignore_msg_in_fast_prov_v4.0' into 'release/v4.0'
ble_mesh: Not ignore msg when fast prov is enabled (v4.0)

See merge request espressif/esp-idf!8711
2020-05-21 15:16:08 +08:00
Island
471171cb32 Merge branch 'feat/ble_mesh_sensor_model_example_v4.0' into 'release/v4.0'
ble_mesh: Add ble mesh sensor model examples (v4.0)

See merge request espressif/esp-idf!8508
2020-05-21 15:14:22 +08:00
Island
3b4ff12246 Merge branch 'bugfix/ble_mesh_compile_error_o2_v4.0' into 'release/v4.0'
ble_mesh: Fix compile error when -O2 (performance) is chosen (v4.0)

See merge request espressif/esp-idf!8617
2020-05-21 15:13:56 +08:00
Island
351dba9272 Merge branch 'bugfix/ble_mesh_provisioner_check_key_v4.0' into 'release/v4.0'
ble_mesh: Check if appkey exist before deleting it (v4.0)

See merge request espressif/esp-idf!8620
2020-05-21 15:13:31 +08:00
Island
7b6236c2d9 Merge branch 'bugfix/ble_mesh_node_reset_erase_v4.0' into 'release/v4.0'
ble_mesh: Fix node not erase info completely (v4.0)

See merge request espressif/esp-idf!8623
2020-05-21 15:12:21 +08:00
Michael (XIAO Xufeng)
1ce4c20115 Merge branch 'bugfix/fix_gpio_wake_up_disable_invalid_for_rtc_io_v4.0' into 'release/v4.0'
bugfix (GPIO): fixed gpio_wake_up_disable not working for RTC IO (release/4.0)

See merge request espressif/esp-idf!7996
2020-05-21 11:39:39 +08:00
lly
9a654ec590 ble_mesh: Add some common macros for sensor model 2020-05-20 10:51:55 +00:00
lly
193828f121 ble_mesh: Allow empty sensor series column value 2020-05-20 10:51:55 +00:00
lly
fab2dcb790 ble_mesh: Check if same sensor (settings) property id exists 2020-05-20 10:51:55 +00:00
lly
d3619d0b45 ble_mesh: Allow empty sensor settings exist 2020-05-20 10:51:55 +00:00
Prasad Alatkar
5af06f49f5 NimBLE: Include upstream fixes and use macros for log level filtering (backport v4.0)
Change list:
- Reduces the size of the compiled binary, PR: https://github.com/espressif/esp-nimble/pull/6
- Null pointer check, PR: https://github.com/apache/mynewt-nimble/pull/701
- Pairing procedure abort on unexpected req: https://github.com/apache/mynewt-nimble/pull/710
- Fix conn flags after pairing: https://github.com/apache/mynewt-nimble/pull/730
- Remove notification for update process timeout (Vol 6, Part B, section 5.2 ):
  https://github.com/apache/mynewt-nimble/pull/782
- CCCD fix : https://github.com/apache/mynewt-nimble/pull/790 and
  https://github.com/apache/mynewt-nimble/pull/804
- Host based Privacy (RPA) fix: https://github.com/espressif/esp-nimble/pull/7

 Closes https://github.com/espressif/esp-nimble/issues/10

 Closes https://github.com/espressif/esp-idf/issues/4413
2020-05-20 16:19:55 +05:30
zhangyanjiao
e430860df3 wifi changes:
1. fix the bug for softAP update second channel wrong
2. change wifi_scan_time_t from union to struct
3. query country code wrong when policy change from manual to auto
4. fix the timeout issue of EAPOL four-way handshake
5. fix the crash issue when fetch peer after delete the cur_peer
2020-05-20 18:13:07 +08:00
Jiang Jiang Jian
fc2199c5d6 Merge branch 'bugfix/wpa3_mixed_mode_authype_v4.0' into 'release/v4.0'
esp_wifi: Add and utilize WPA3/WPA2 Mixed mode Authtype (backport v4.0)

See merge request espressif/esp-idf!8768
2020-05-17 17:05:15 +08:00
Jiang Jiang Jian
4695eeddee Merge branch 'bufix/fix_v4.0_bluedroid_bugs_mr' into 'release/v4.0'
component/bt: fix notify malloc failed , fix no BLE_AUTH_CMPL_EVT and fix bluedroid btc deinit crash(backport 4.0)

See merge request espressif/esp-idf!8755
2020-05-16 19:53:15 +08:00
Piyush Shah
65d4596a36 wifi_provisioning: Catch the Wi-Fi events even after Connection errors
It was observed that after sending credentials, if the first
Wi-Fi conection attempt fails, the Wi-Fi provisioning managager
ignores subsequent Wi-Fi events. So, even if the device eventually
connects to the AP, the provisioning stays on indefinitely.

Changing a check so that subsequent events are also captured and
provisioning finishes successfully.
2020-05-15 13:50:47 +00:00
Nachiket Kukade
748720a466 esp_wifi: Update WiFi lib
Add and utilize WPA3/WPA2 Mixed mode Authtype
2020-05-15 14:58:07 +05:30
xueyunfei
8688bd0593 add LINGER to menuconfig 2020-05-15 17:18:50 +08:00
zhiweijian
6ee978c6aa add congest direct callback and fix malloc failed when multi_connection notify performance test 2020-05-15 16:18:31 +08:00
wangcheng
d231b25bc4 fix bta_dm_deinit_cb crash 2020-05-15 16:16:26 +08:00
wangcheng
456c8bdbdf master missing BLE_AUTH_CMPL_EVT after restart 2020-05-15 16:16:26 +08:00
Jiang Jiang Jian
94917184be Merge branch 'bugfix/wpa3_pmf_memleak_fix_v4.0' into 'release/v4.0'
WPA3 / PMF memory leak fixes (backport v4.0)

See merge request espressif/esp-idf!8677
2020-05-15 15:11:44 +08:00
morris
b13d96ae8b ethernet: better control start/stop/uninstall/install 2020-05-14 22:12:42 +08:00
morris
496ab2a83f ethernet: esp_eth_stop API should stop emac hardware 2020-05-14 22:10:37 +08:00
Angus Gratton
3c882991b5 Merge branch 'bugfix/ethernet_task_watchdog_timeout' into 'release/v4.0'
ethernet: fix potential task watch dog timeout (backport 4.0)

See merge request espressif/esp-idf!8743
2020-05-14 16:21:35 +08:00
morris
6442184dd8 ethernet: fix potential task watch dog timeout 2020-05-14 14:23:32 +08:00
Hrishikesh Dhayagude
02c47360f1 Add NimBLE config options in sdkconfig.rename 2020-05-14 11:31:53 +10:00
Nachiket Kukade
db5f01429f wpa_supplicant: Fix memory leaks in WPA3 connection
1. Buffers for SAE messages are not freed after the handshake.
   This causes memory leak, free buffers after SAE handshake.
2. SAE global data is not freed until the next WPA3 connection
   takes place, holding up heap space without reason. Free theis
   data after SAE handshake is complete or event fails.
3. Update wifi lib which includes memory leak fix during BIP
   encryption/decryption operations.
2020-05-13 20:45:34 +05:30
Nachiket Kukade
b938846de6 wpa_supplicant: Fix formatting of file esp_wpa3.c
Replace tabs with spaces in esp_wpa3.c.
2020-05-13 20:35:56 +05:30
Jiang Jiang Jian
7d295e18bc Merge branch 'bugfix/fix_switch_channel_without_discon_issue_v4.0' into 'release/v4.0'
esp_wifi: Fix AP switch to adjacent channel without disconnect (backport v4.0)

See merge request espressif/esp-idf!8705
2020-05-13 19:58:22 +08:00
lly
b47111c708 ble_mesh: Not ignore msg when fast prov is enabled
When fast provisioning is enabled, Provisioner shall not
ignore messages from the nodes whose addresses are not in
the provisioning database. Because other nodes which are
not provisioned by the Primary Provisioner will send node
address messages to the Primary Provisioner.
2020-05-13 10:09:50 +08:00
Jiang Jiang Jian
6a6de506b1 Merge branch 'bugfix/supplicant_general_fixes_40' into 'release/v4.0'
wpa_supplicant: Fix some memleaks and invalid memory access (backport v4.0)

See merge request espressif/esp-idf!8553
2020-05-12 20:17:51 +08:00
Jiang Jiang Jian
12a65aaac1 Merge branch 'bugfix/wep40_key_parsing_bug_v4.0' into 'release/v4.0'
wpa_supplicant: Add parsing support for WEP40 key(backport)

See merge request espressif/esp-idf!8684
2020-05-12 20:17:15 +08:00
Jiang Jiang Jian
6bfad8a47d Merge branch 'fixbug/tcp_kill_state_assert_for_v4.0' into 'release/v4.0'
lw-ip:fixbug for tcp kill state assert(backport 4.0)

See merge request espressif/esp-idf!8451
2020-05-12 20:15:45 +08:00