1. Change wifi scan duration from 120ms to 100ms
2. Using deport reg instead of ahb
3. Revert to report specific reason code when receiving deauth during 4-way-handshark
4. Fix the bug that tx ampdu parameter is not from peer device
5. Faster WiFi station connect improvement, avoid 100ms passive scan
6. Add FCS failed packets filter
7. Fix country code last byte to space instead of NULL
8. Fix softap cannot forward A-MSDU
9. Fix max tx power to 20dBm
10. Fix the issue that the esp_wifi_sta_get_ap_info can't get country
11. Update esp32 phy lib to v4660
12. Update esp32s2 phy lib to v1300
13. Fix the bug that esp32s2 can't get CSI info
1. Add description for esp_wifi_set_inactive_time()
2. Add documentation to avoid using WiFi modem sleep for WiFi/BT coexistence
3. Remove description of unusable API esp_wifi_restart()
4. Update esp_now_fetch_peer discription
5. Update table format prblm for esp_wifi_set_max_tx_power()
6. Update description for ssid and password
1. Fix FIX-ROOT does not reconnect to router when disconnect reason is too many
2. Add API esp_mesh_print_scan_result
3. Modify not to reset mesh_xonseq of self and children when flush_upstream_packets
4. Fix not switch to a parent candidate which has the same layer and assoc as current parent
5. Fix not arm parent monitor when a parent candidate is cleared without sending an event to mesh layer
6. Fix the new voted root does not reconnect to router if rssi is weak
1. Add STA checks during STA PMF operations
2. Fix WPA2-Ent issue with Open AP
3. Skip WPA-TKIP profile if PMF is required
4. Skip & clear Supplicant PMK Cache with mismatching AP config
Rewrite ble dynamic prio to fix ble disconn in conn_param_update/channel_map_update
Rewrite ble dynamic prio in connection establishment
Fix ble dynamic prio with latency
Fix status bit set error when conn fail
1. Modify LR for esp32 and esp32s2
2. Fix esp32s2 RTS rate
3. Optimize some debug logs for probe response
4. Optimize phy and soc files
5. Add IPv6 DSCP
6. Fix classify AC to TID
7. Fix the bug that no event for connect
H/W decryption of Mgmt frames was disabled for PMF and done through
S/W. If ESPNOW packets go through this path, it affects backward
compatibility since method of decrypting Mgmt packets is different in H/W.
To address PMF + ESPNOW Co-existance, CCMP decryption method is modified
for ESPNOW packets so that they can be decrypted correctly. Since Tx
of ESPNOW packets can still be done in H/W alongside PMF, no change
required in encryption method in S/W.
Co-Authored-By: Nachiket Kukade <nachiket.kukade@espressif.com>
Co-Authored-By: zhangyanjiao <zhangyanjiao@espressif.com>
Co-Authored-By: kapil.gupta <kapil.gupta@espressif.com>
1.Fix WiFi fragment issue
2.fix the bug for softAP power save buffer issue
3.fix softap mode event issue
4.fix connect hidden AP doesn't update information
5.update esp32 phy v4370
Replace periph_module_enable/disable by periph_wifi_bt_common_module_enable which are in IRAM.
AddIRAM_ATTR periph_ll_wifi_bt_module_enable_clk_clear_rstandIRAM_ATTR periph_ll_wifi_bt_module_disable_clk_set_rstto fit O0 optimization level.
Delete duplicated spinlock and counter.
WPS can send multiple AP credentials, while existing implementation
will only use the first credentials which could be for the 5G band.
Fix this by passing these credentials to the App and attempting
to connect using each of those. Older Apps will remain compatible
without breaking WPS, but the issue will remain.
1. Avoid parsing RSN/WPA IE's after connection
2. Remove AUTH_CHANGED reason code logic
3. fix the bug when calculating the PMK, the local rx beacon time increment is 0
4. mesh: don't disconnect when tbtt update
1. remove warning log when mesh is started:
Error! Should use default passive scan time parameter for WiFi scan when Bluetooth is enabled!!!!!!
2. remove abort when mesh is started:
Error! Should enable WiFi modem sleep when both WiFi and Bluetooth are enabled!!!!!!
1. Fix WPA3 Auth timeout during BLE coex
2. fix addba ssn and send bar for first ampdu
3. fix the bug that airkiss find hidden AP fail
4. update mesh lib
5. fix interrupt handle param variable error
Added following as part of this change
1. Removed auth_changed event
2. Updated doc regarding usage of WPA/WEP secuiry modes
3. Fixed WPA2 enterprise authmode threshold.
