Commit Graph

31271 Commits

Author SHA1 Message Date
David Čermák
6d33f7af81 Merge branch 'mqtt/update_submodule_e6afdb_v5.1' into 'release/v5.1'
change(mqtt): Update submodule to e6afdb (v5.1)

See merge request espressif/esp-idf!26257
2023-10-17 14:13:25 +08:00
David Čermák
a7a43973f6 Merge branch 'bugfix/ksz8041_model_number_0x13_v5.1' into 'release/v5.1'
esp_eth: Add model number 0x13 to the list of suported ksz80xx models (backport v5.1)

See merge request espressif/esp-idf!26380
2023-10-17 14:13:00 +08:00
Island
ca8d6f3740 Merge branch 'backport_v5.1' into 'release/v5.1'
Fix some BLE bugs in bluedroid host(backport v5.1)

See merge request espressif/esp-idf!26496
2023-10-17 11:01:55 +08:00
Erhan Kurubas
754b2a0de1 fix(interrupts): reorder esp32s3 irq names to align with the respective irq numbers 2023-10-16 22:20:45 +02:00
Nic Ballinger
235c82b6ee fix(docs/jtag): Fix hard-coded HW breakpoints/watchpoints number
Closes https://github.com/espressif/esp-idf/pull/11986
2023-10-16 17:30:36 +03:00
zhanghaipeng
042fb7834a fix(bt/bluedroid): Fix hid example stack overflow bugs when using esp32s3 2023-10-16 19:56:42 +08:00
zhanghaipeng
296a6cddee fix(bt/bluedroid): Fix remove resolving list error for esp32 2023-10-16 19:56:31 +08:00
zhanghaipeng
f2c3bd38af fix(bt/bluedroid): Fix bugs in ble service change characteristic 2023-10-16 19:56:21 +08:00
zhanghaipeng
3f69d20d4d feat(bt/bluedroid): Support scan response data length zero in BLE 2023-10-16 19:56:12 +08:00
zhanghaipeng
e92c57c6cc fix(bt/bluedroid): Optimize the description of Scan Duplicate in BLE 2023-10-16 19:56:02 +08:00
zhangwenxu
3bb89e116a feat(openthread): Host connection logic refactor 2023-10-16 15:02:57 +08:00
zlq
17c2931309 feat(bootloader): adjust dbias of bootloader, change clock of H2 to 64
MHz
2023-10-16 14:35:45 +08:00
Xiao Xufeng
81dcc61008 Revert "feat(volt): chip auto adjust volt for esp32c6 & esp32h2"
This reverts commit b221f87e00.
2023-10-16 14:35:41 +08:00
morris
0f51501495 Merge branch 'bugfix/h2_i2c1_no_signal_v5.1' into 'release/v5.1'
fix(i2c): I2C port 1 doesn't work on esp32h2 (backport v5.1)

See merge request espressif/esp-idf!26459
2023-10-16 14:13:23 +08:00
Island
42efaf9794 Merge branch 'bugfix/BLEQABR23-632v51' into 'release/v5.1'
fix(ble_mesh): avoid executing bt_mesh_host_init() more than once when using nimble (v5.1)

See merge request espressif/esp-idf!26240
2023-10-16 12:01:28 +08:00
Wu Meng Shi
b7d403ddfe fix(ble_mesh): avoid executing bt_mesh_host_init() more than once when using nimble (v5.1) 2023-10-16 12:01:28 +08:00
alanmaxwell
0bce4b0b72 fix(phy): fix wifi deinit stuck issue for ESP32C6 2023-10-16 11:56:08 +08:00
Island
7781867fbd Merge branch 'bugfix/0925_update_libble_c6_h2_c2_v5.1' into 'release/v5.1'
Bugfix/0925 update libble c6 h2 c2 v5.1

See merge request espressif/esp-idf!26177
2023-10-16 10:50:27 +08:00
gongyantao
d4b6952328 fix(bt/bluedroid): ble fails to load bonded device info after reboot
1: add a quantity check in bt when writing paired device info into nvs.
2: delete the exceeded device info from NVS when get bonded list during
bluedroid initialization.
3: unify the process of bt and ble to load bonded list during bluedroid
initialization.
2023-10-13 19:20:20 +08:00
liuning
21360b9ef3 fix(pm): fix soc wakeup after wifi disconnected, station no respond after m f null, crash when connected to non_trans bssid 2023-10-13 18:17:34 +08:00
Niklas Kaaf
7de4e28fdd fix: "erro code" -> "error code" typos 2023-10-13 18:17:34 +08:00
alanmaxwell
8467bddaea fix(wifi): Fix some wifi issue
1.fix multi antenna issue
2.fix dirty eb when rx HE rate action for C6
3.fix h/w modem state consecutive times when the modem sleep type is modified in runtime
2023-10-13 18:17:34 +08:00
Cao Sen Miao
ae604cbbdd fix(i2c): I2C port 1 doesn't work on esp32h2 2023-10-13 15:57:18 +08:00
gongyantao
d62393472c fix(bt/bluedroid): Add correct macro for ertm mode included flag 2023-10-13 14:44:25 +08:00
baohongde
dc6120ee17 feat(bt/hci): Added Vendor-Specific HCI command to disable DM1 for ACL-U 2023-10-13 14:20:17 +08:00
baohongde
9fc04635d1 fix(bt/bluedroid): Triggering disconnect event of GAP correctly 2023-10-13 14:20:04 +08:00
baohongde
fb6a12d24c fix(bt/bluedroid): Fix issue of QoS configuration failure when t_poll is greater than 40 2023-10-13 14:19:47 +08:00
cjin
f94b64d820 feat(ble): added modem reset on c2 h2 and c6 2023-10-13 11:42:14 +08:00
CC
9c479e6589 esp_wifi.h typo
typo in esp_wifi_scan_get_ap_num comment
APIs -> APs
2023-10-13 09:29:11 +08:00
luomanruo
c9f7186357 ble: update tx power level index of ESP32-H2 and ESP32-C2 2023-10-12 15:55:29 +08:00
luomanruo
5becfa46bc ble:update c2 libble to 6a8d1f3d, h2 c6 libble to 57ed7949 2023-10-12 15:55:29 +08:00
Michael (XIAO Xufeng)
c1c843f5e2 Merge branch 'bugfix/fix_adc_sar_set_power_mode_no_effect_v5.1' into 'release/v5.1'
ADC: Fixed wrong ADC reading issue caused by ADC and WiFi power conflict on ESP32C6(backport v5.1)

See merge request espressif/esp-idf!26235
2023-10-12 15:18:18 +08:00
morris
46817f4edd Merge branch 'bugfix/parlio_tx_dma_descriptor_v5.1' into 'release/v5.1'
fix(parlio_tx): fix wrong dma descriptor setup (v5.1)

See merge request espressif/esp-idf!26253
2023-10-12 13:39:08 +08:00
Michael (XIAO Xufeng)
f618850370 Merge branch 'change/remove_s3_120_sdr_warning_v5.1' into 'release/v5.1'
mspi: remove s3 120mhz sdr warning (v5.1)

See merge request espressif/esp-idf!26254
2023-10-12 12:36:42 +08:00
Michael (XIAO Xufeng)
1c3b8656d3 Merge branch 'bugfix/rmt_pm_lock_type_v5.1' into 'release/v5.1'
fix(rmt): use ESP_PM_CPU_FREQ_MAX for RMT for non-dma channel (v5.1)

See merge request espressif/esp-idf!26258
2023-10-12 12:31:47 +08:00
wuzhenghui
2302bc4862 fix(heap): fix memory caps defination in memory_layout
fix the issue on esp32c3 where retention memory was exhausted
prematurely and preventing the CPU from powering down because
all of the last level of RAM is retention dma accessible on
esp32c3.
2023-10-12 11:57:49 +08:00
Michal Jenikovsky
1f6f5396f4 fatfs: raw diskio: Fixed handling read-only filesystem
ff_ routines incorrectly reported disk state and caused whole fatfs
to lock-up when trying to write to read-only device.

Signed-off-by: Michal Jenikovsky <jendo@jmsystems.sk>
2023-10-12 04:48:47 +02:00
Michal Jenikovsky
31b4b0a8d4 idf.py: gdb action incorrectly generated EOL gdbinit scripts
GDB on Windows incorrectly reads EOL in the script files causing 'gdb'
action to fail.

(gdb) source .../build/gdbinit/py_extensions
(gdb) source .../build\gdbinit\symbols
add symbol table from file "...\build\bootloader\bootloader.elf"
.../build\gdbinit\symbols:6: Error in sourced command file:
Undefined command: "".  Try "help".

Forcing line separator to '\n' resolved the issue

Signed-off-by: Michal Jenikovsky <jendo@jmsystems.sk>
2023-10-12 04:48:47 +02:00
Alexey Lapshin
fa1924f09b fix(app_trace): fix host file write API return value 2023-10-11 15:23:56 +04:00
Rahul Tank
88093c8618 fix(nimble): Fix compilation issues when max bonds or cccd is set to 0 2023-10-11 14:01:51 +05:30
Anton Maklakov
be79c75b64 feat(tools): Add QEMU 8.0.0_20230522 to tools.json
Process wildcards in the install and download lists of idf_tools
    Fix the install and download handlers to get common behaviour
2023-10-11 12:28:47 +07:00
liuning
870d2cac32 (fix)esp_wifi: wifi beacon timeout after connection established 2023-10-11 09:38:51 +08:00
muhaidong
039ef51db5 fix(wifi): fix some wifi issues
1. fix enable psram wapi dhcp fail issue
2. fix c6 esp_wifi_set_max_tx_power fail issue
3. fix wrong wifi mode connect crash issue
4. fix null data sequence number issue
2023-10-10 21:39:56 +08:00
zwx
b0300ed460 fix(openthread): fix config typo for mtd 2023-10-10 20:16:22 +08:00
Bogdan Kolendovskyy
5a195cdf0a fix(esp_eth): Add model number 0x13 to list of suported models
Add model number 0x13 to KSZ80xx driver's list of supported models
corresonding to KSZ8041RLNI.
2023-10-09 12:42:15 +02:00
zwx
faa2159f06 feat(openthread): update openthread upstream 2023-10-09 16:22:57 +08:00
Mahavir Jain
7745b22cc8 fix(startup): flip the security configuration check order
For cases where the bootloader is not enabled with the security features
ends up receiving an incorrect application with flash encryption enabled
should not really program any security efuses.

In the startup sequence, we first used to program the ROM DL mode
configuration but now we check for the flash encryption related checks
first. If the flash encryption related checks finds that flash
encryption is not enabled on the device then it aborts the boot process.
This is the case with `CONFIG_SECURE_FLASH_CHECK_ENC_EN_IN_APP` enabled.

This would at-least ensure that accidental program of security enabled
application does not really program any ROM DL mode efuses and there is
chance to recover the device.
2023-10-09 03:29:58 +00:00
Wu Meng Shi
f75474f359 fix(ble_mesh): fix compilation failure on using scene model. 2023-10-08 16:37:00 +08:00
WanqQixiang
7bfd475528 fix(protocomm): Remove the configuration check of wifi_provisioning for protocomm component 2023-10-08 16:23:03 +08:00
Abhik Roy
94730db3d4 feat(lwip): Fixes and Improvements for NAPT and SBOM Support
- napt: restore to the initial state in deinit (espressif/esp-lwip@5c4f899f)
- napt: Fix ip_portmap_add() to keep only one port mapping (espressif/esp-lwip@d65ad241)
- napt: Fix clean compilation (espressif/esp-lwip@7033e26f)
- napt: Fix IP forwarding when forward netif enable NAPT (espressif/esp-lwip@bc78df87)
- napt/stats: Move some napt counters to stats module (espressif/esp-lwip@b55e64ae)
- ip_napt_maint: Fix timestamp overflow handling (2.1.3) (espressif/esp-lwip@a7e0a50c)
- napt: Fixes and improvements (2.1.3) (espressif/esp-lwip@fadb9109)
- Add sbom descripton file for Software BOM (espressif/esp-lwip@f07097d7)
2023-10-06 19:32:25 +11:00