This commit make idf_monitor overwrite the ESPPORT environment variable
with the port it's using, and re-run make with the modified environment
variable. In this way, the make invoked will inherit the idf_monitor's
port.
Closes https://github.com/espressif/esp-idf/issues/4591
The GDB uses CreateFile to open COM port on Windows. However this
function requires COM path to be `\\.\COMx` to open COM port whose
number is larger than 10.
Replace the port name from `COM` to `\\.\COM` when on Windows to fix
this.
This adds detection of UART core dumps to IDF monitor. By default,
core dumps are not printed to the console, but are processed by
espcoredump.py using 'info_corefile' command. The result is printed
to stdout.
This feature can be disabled in menuconfig.
In the future this can be extended to allow running espcoredump.py
with 'dbg_corefile' argument, which is similar to the current GDB Stub
behavior.
Related to IDF-52.
implemented workaround in idf_monitor for known usbser.sys bug which
causes changes in RTS signal to only be sent if DTR signal also changes.
Works by forcing a dummy change in DTR signal (re-assigning its current
value, as it has previously been done in the flashing tool)
Closes https://github.com/espressif/esp-idf/pull/4676
Windows Console write or flush may fail (throwing WindowsError, a subclass of OSError) if the data
written can't be displayed. This may be the case if the serial port is producing garbage bytes.
Ignore the error, in the hope that the serial port may "come good" and write non-garbage later.
Currently, the only way of exiting the idf_monitor program is to hit the CTRL+] button, if your keyboard doesn't have that key unless you hit another modifier key, it's not super trivial to exit.
This change adds the option to exit with CTRL+T (for menu) then hitting X (or CTRL+X) for exiting.
Closes https://github.com/espressif/esp-idf/pull/4167
Closes https://github.com/espressif/esp-idf/issues/4129
51e42d8e92
introduced filtering options which handles the last (unterminated) line
with a delay. This introduced poor performance for console applications
when the user interacts with the ESP32 device in the same line because
there is an artificial delay for each key-press.
bb152030a0
decreased the delay but there are still delays for each key-presses.
The current fix makes only one delay per line instead of each
key-presses. When an unterminated line is detected then no more
"delayed" print is used for the given line.
Fixes https://github.com/espressif/esp-idf/issues/2054
The IDF monitor waits for one second before printing the last
unterminated line. This is necessary for the correct filtering.
However, this causes poor performance, for example, in the case of the
system/console example.
This fix reduces the waiting time which improves the response time of
the console example and doesn't seem to influence the monitor filter.
Closes https://github.com/espressif/esp-idf/issues/2054
Don't show the "Python 2 interpreter" option in menuconfig when using CMake.
This is a stop-gap until we support Python 2 & 3 together in ESP-IDF (soon).
Closes https://github.com/espressif/esp-idf/issues/1924
Other terminal emulators (screen, minicom) default to sending CR when
ENTER is pressed on the keyboard. Make behavior of idf_monitor
consistent with them.
Between 3.1.0 and 3.3.0, pyserial had thread cancellation implemented
using a select, which blocked on the stdin and an auxiliary pipe. When
thread had to be cancelled, a byte would be sent into the pipe,
unblocking stdin.
Unfortunately, this method suffers from a problem with using select on
a StreamReader (which represents the decoder wrapped around stdin).
In some cases, when the TTY sends an escape sequence in response to
an escape sequence received from serial, this escape sequence will not
be read from stdin until some key is pressed.
In https://github.com/pyserial/pyserial/commit/cab3dab, this method
was replaced with an TIOCSTI ioctl. This change makes sure we use the
new cancellation method even if the script is running with older
pyserial.
Add new "make size_components" and "make size_files" targets for analysing makeup of the ELF file.
Plain "make size" output now looks like this:
Total sizes:
DRAM .data size: 11156 bytes
DRAM .bss size: 22304 bytes
Used static DRAM: 33460 bytes ( 294220 available, 10.2% used)
Used static IRAM: 80480 bytes ( 50592 available, 61.4% used)
Flash code: 421463 bytes
Flash rodata: 103824 bytes
Total image size:~ 616923 bytes (.bin may be padded larger)
* "make monitor" not passed the configured baud rate
Closes#436https://github.com/espressif/esp-idf/issues/436
* Pass toolchain prefix from sdkconfig into monitor tool
* Allow setting EOL in idf_monitor.py, use CRLF by default
* Detect if /dev/tty.X is used on macOS, warn and replace with /dev/cu.X
* If a build fails or gdb exits, ignore Ctrl-T (allowing Ctrl-T Ctrl-A/F to be same key sequence everywhere)
* Add a note about winpty on Windows
Ref 02fdf8271d (commitcomment-21369196)
