Some AP's keep NULL-padding at the end of some variable length WPS
Attributes. This is not as par the WPS2.0 specs, but to avoid interop
issues, ignore the padding by reducing the attribute length by 1.
When using DPort to read fifo, fifo_cnt is not credible, we need to calculate the real cnt based on the fifo read and write pointer. When using AHB to read FIFO, we can use fifo_cnt to indicate the data length in fifo.
Previously the model recv operation is a littl fuzzy.
With the changes, the model recv operation is splitted into:
- find op
- check app_idx
- check dst
- check length
- update info & handle message
The transport segmented TX nack and seg_pending fields must be at least
6 bits to avoid overflow for 32 segment messages. This change rearranges
the seg_tx fields to gather all state flag fields in one byte, while
making the counter fields whole bytes.
Ensures that friend messages are enqueued, even if the packet is
received with an appkey is unknown to the friend. Previously, sdu_recv
would return EINVAL if the appkey was unknown, which would prevent the
lower transport layer from adding the packet to the friend queue. This
is irrelevant for the logic in lower transport, and should not be
returned as an error.
esp_mqtt_abort_connection: Fixed an issue which could result in a race condition and subsequent crash
esp_mqtt: Change an error print to use ESP_LOGE instead of ESP_LOGI
Move Sending MQTT connect message log from Info to Debug level
docs: Makes clear that publish API could block
Change the message printed after MQTT connection failure
Previous implementation violated the RFC by having both the actual opcode and WS_FIN flag set for all fragments of a message.
Fixed by setting the opcode only for the first fragment and WS_FIN for the last one
Closes IDFGH-2938
Closes https://github.com/espressif/esp-idf/issues/4974
Device name will be reset when deinit mesh stack. If not
initializing device name during the next mesh stack init,
it will fail to set the device name when using bluedroid.
Since bt_mesh_friend_init() will only be invoked when
a device is provisioned or Provisioner is enabled, so
we add a flag to indicate if the friend functionality
is initialized in case deinit before initialization.
Compared with the latest idf, idf4.0 defines BIT(nr) in
the "esp_bit_defs.h" without the pre-condition "#ifndef BIT",
which will cause compile warning when using mesh. So we
include the header file "soc/soc.h" in "mesh_util.h",
which can bypass the definition of "BIT" in "mesh_util.h"
when compiling.
Old version of BLE Mesh has no device role storage, because
previously we only support storing mesh node info.
If the binary of the node is upgraded from old version to a
new version (support storing provisioner info), the mesh info
of the node will not be restored because mesh role does not
exist in the flash.
When using fast provisioning, the Provisioner functionality
will be enabled. Unicast addresses within the pre-allocated
range will be used for provisioning nodes. And during the
address assignment, the allocated unicast address will be
checked that if it's duplicated with other nodes addresses
and the Provisioner's own addresses.
So before starting using fast provisioning, we need to update
the Provisioner address.
Since the behavior of sending segmented messages has been
changed properly, the calculation of timeout value which
will be used when sending an acknowledged message by a
client model also needs to be updated.
Add mutex to protect some variables of the mesh segmented
messages.
Currently the timeout handler of mesh will be executed in
the btc task, while the received mesh messages will be
handled in the btu task. In case some variables are set to
NULL when handled in the btu task, meanwhile these variables
are also accessed in the timeout handler, so we add mutex to
protect these variables and related operations.
The publication context is checked for NULL in bt_mesh_model_publish()
however it was dereferenced before that. Move the assignment to
ctx.send_rel to the same place where other ctx members are set.
Split mesh_util.h into mesh_byteorder.h, mesh_compiler.h,
mesh_ffs.h and mesh_util.h based on the classification of
Zephyr, which will make further porting more clear.
The Friend queue uses the message SeqAuth to determine whether the
message is already in the queue. To facilitate this, the SeqAuth is
passed around as a pointer throughout the transport modules. In the
bt_mesh_ctl_send functions, this parameter is also exposed in the API,
but the internal usage is inconsistent and buggy. Also, no one actually
uses this parameter.
- Removes seq_auth param from bt_mesh_ctl_send, instead passing NULL
directly to the friend module, to enforce its addition to the queue.
- Makes the seq_auth pointer const throughout the friend module.
Changes the behavior of the message cache to optimize for cache
capacity. Previously, the message cache's primary function was to avoid
decrypting messages multiple times, although the cache's main function
in the spec is to avoid message rebroadcasting. Optimizing for minimal
decryption causes us to fill the network cache faster, which in turn
causes more cache misses, potentially outweighing the advantage.
Now stores src + seq in message cache instead of field hash value. This
cuts cache size in two, while including more of the sequence number than
before.
Adds messages to the cache only after the packet is successfully
decrypted. This reduces noise in the cache, and ensures that no
invalid deobfuscations are added.
Additionally, this fixes a bug where multiple calls to net_decrypt with
the same packet failed, as the message cache found its own entry from
the previous call.
Implements several changes to the transport layer segmented tx to
improve group message performance:
- Moves retransmit counter to tx context instead of per packet. As every
unacked packet is sent every retransmit, the retransmit counters would
be the same in each segment. This makes it easier to control progress.
- Delays the scheduling of the retransmit until the completion of the
last segment by adding a seg_pending counter. This is essentially the
same as the old behavior, except that the old behavior might retrigger
the sending before all segments are finished if the advertising is
slow.
- Allows the group transmits to stop as soon as all retransmits have
been exhausted, instead of timing out waiting for acks that won't
come. This allows group tx to finish without error.
- Fixes a bug where a failed TX would block IV update.
- Cancels any pending transmissions of acked segments.
- Reduces log level for several common group tx scenarios that aren't
erronous.
Backport of https://github.com/apache/mynewt-nimble/pull/724
Mesh spec 1.0.1 changes proxy disabling behavior to only affect the
relaying from proxy nodes. Previously, disabling proxy would shut down
all proxy and node activity.
Tweaks from the original commit:
- Removed redundant call to bt_mesh_adv_update() in gatt_proxy_set()
- Removed invalid ref to 4.2.11.1 in node_identity_set()
---
According to Mesh Profile Spec 1.0.1, Section 4.2.11:
"If the Proxy feature is disabled, a GATT client device can connect
over GATT to that node for configuration and control. Messages from
the GATT bearer are not relayed to the advertising bearer."
Moreover some notes have been removed from the spec compared to
version 1.0:
Mesh Profile Spec 1.0, Section 4.2.11:
"Upon transition from GATT Proxy state 0x01 to GATT Proxy state 0x00
the GATT Bearer Server shall disconnect all GATT Bearer Clients."
"The Configuration Client should turn off the Proxy state as the last
step in the configuration process."
Mesh Profile Spec 1.0, Section 4.2.11.1:
"When the GATT Proxy state is set to 0x00, the Node Identity state
for all subnets shall be set to 0x00 and shall not be changed."
Until now the choice of reliable sending (segmented messages with
acks) was implicitly dependent on the size of the payload. Add a new
member to the bt_mesh_model_pub to force using segment acks even when
the payload would fit a single unsegmented message.
When PB-GATT support has been enabled the provisioning code "borrows"
the buffer from the proxy code. However, the way that initialization
was happening the proxy buffers were initialized only after
provisioning initialization, resulting in a corrupted buffer with
buf->data pointing to NULL. Reorder the initialization calls so that
proxy is done first and provisioning only after it.
Allow models to skip a periodic publish interval by returning an error
from the publish update callback.
Previously, an error return from publish update would cancel periodic
publishing. This can't be recovered from, and as such, no valid model
implementation could return an error from this callback, and there was
no way to skip a periodic publish.
The function bt_mesh_ctl_send() used to support maximum length of
11 bytes. The segmentation complies with the BLE Mesh Standard.
The ack is disabled in case of non unicast address.
1. fix the bug for softAP update second channel wrong
2. change wifi_scan_time_t from union to struct
3. query country code wrong when policy change from manual to auto
4. fix the timeout issue of EAPOL four-way handshake
5. fix the crash issue when fetch peer after delete the cur_peer
It was observed that after sending credentials, if the first
Wi-Fi conection attempt fails, the Wi-Fi provisioning managager
ignores subsequent Wi-Fi events. So, even if the device eventually
connects to the AP, the provisioning stays on indefinitely.
Changing a check so that subsequent events are also captured and
provisioning finishes successfully.
1. Buffers for SAE messages are not freed after the handshake.
This causes memory leak, free buffers after SAE handshake.
2. SAE global data is not freed until the next WPA3 connection
takes place, holding up heap space without reason. Free theis
data after SAE handshake is complete or event fails.
3. Update wifi lib which includes memory leak fix during BIP
encryption/decryption operations.
When fast provisioning is enabled, Provisioner shall not
ignore messages from the nodes whose addresses are not in
the provisioning database. Because other nodes which are
not provisioned by the Primary Provisioner will send node
address messages to the Primary Provisioner.
Previously only mesh node info is supported to be stored
in flash. So when trying to reset the node, we only need
to judge if the BLE_MESH_VALID flag is set.
Currently we support storing both node & Provisioner info
in flash, when trying to erase the node info from flash,
the BLE_MESH_NODE flag will be checked. So we need to set
bt_mesh.flags to 0 when all the erase operations are done.
EAP reauth frames are dropped at various stages due to current
implementation of WPA2 ENT states and EAP SM init/deinit logic.
Route EAPOL frames based on EAP pkt type and maintain EAP SM
to facilitate EAP re-authentication process.
Added WPA3 Testcases support for -
1. Anti-Clogging Token Request support
2. Return correct status from SAE modules for invalid scenarios
3. Add PMK Caching support for WPA3
wifi lib includes fixes for below PMF Certification issues -
1. Check return status of decrypt operation. Fixes 5.3.3.1.
2. Allow PMF negotiation for WPA2-Enterprise. Fixes 5.3.3.2, 5.3.3.4.
3. Add NULL check on key before encrypting PMF, fixes crash.
1. Add changes in 4-way handshake path to allow SAE key mgmt.
2. Support for configuring WAP3 at init time, added Kconfig option.
3. Handle and propagate error conditions properly.
Under WPA3-Personal, SAE authentication is used to derive PMK
which is more secure and immune to offline dictionary attacks.
1. Add modules to generate SAE commit/confirm for the handshake
2. Add modules that build and parse SAE data in Auth frames
3. Add WPA3 association and key mgmt definitions
4. Invert y-bit while solving for ECC co-ordinate -
Once an X co-ordinate is obtained, solving for Y co-ordinate
using an elliptical curve equation results in 2 possible values,
Y and (P - Y), where p is the prime number. The co-ordinates are
used for deriving keys in SAE handshake. As par the 802.11 spec
if LSB of X is same as LSB of Y then Y is chosen, (P - Y) otherwise.
This is not what is implemented, so fix this behavior to obtain the
correct Y co-ordinate.
This change ports SAE(Simultaneous Authentication of Equals)
feature from wpa_supplicant and makes it work with mbedtls
crypto APIs. Currently only group 19 is supported. A sample
SAE handshake is included in the testcase. Other minor
changes for DH groups are also included.
1. Add CCMP, AES crypto modules for unicast protected Mgmt frames
2. Add support for computing SHA256 MIC on Bcast Mgmt frames
3. Add support for storing iGTK during 4-way handshake.
4. Provide APIs to MLME for utilizing the SW crypto modules
1. Add APIs for configuring PMF through set config.
2. Map Supplicant and Wifi Cipher types.
3. Add support for PMF negotiation while generating RSN IE.
1) Added PMK caching module from wpa_supplicant.
2) Modified wpa_sm to
a) Add entry to PMK cache when first time associated to an AP.
b) Maintain entry across the associations.
c) Clear current PMKSA when deauth happens.
d) Search for an entry when re-associating to the same AP and
set it as current PMKSA
e) Wait for msg 1/4 from AP instead of starting EAP authentication.
f) Check PMKID in msg 1 with current PMKSA/cache.
g) Use the cached PMK to complete 4-way handshake.
3) Remove config_bss callback as it was redundant and used to cause
problems for PMK caching flow.
Closes IDF-969
During BLE Mesh Provisioner initialization, the stack will restore
the nodes information if settings storage is enabled.
Previously when a failure happens (e.g. found the same uuid) during
the restore procedure, the information of the following nodes will
not be restored and error will be directly returned.
But this will introduce some problem with user experience, because
some newly provisioned nodes information will not be restored and
Provisioner will not be able to control those nodes.
So we change the operation here, when a failure happens during the
restore procedure, Provisioner will only ignore the information of
the current node and continue restoring other nodes information.
With this change, if a Provisioner has provisioned the maximum
number of nodes, it can still report the unprovisioned device
beacon from other nodes to the application layer. And this will
be more reasonable compared with the previous implementation.
Previously when the node array of Provisioner is full, no beacon
from unprovisioned devices will be reported, only some warning
logs will be given.
Previously only check the node address when it is assigned by the
application layer. Here we also check the address when the address
is allocated internally. And this will be useful when some mesh
internal tests are performed.
Previously the BLE_MESH_MAX_STORED_NODES option is added for
internal mesh test, which will be a little confusing for the
users to understand.
Here we remove this option, instead the BLE_MESH_MAX_PROV_NODES
will be used for all the cases. For mesh internal test, when
the test function is called to add some nodes info, the info
will be stored in the array of provisioned nodes directly.
The replay protection list of Provisioner should be at least equal
to the number of nodes with the precondition that each node contains
only one element.
The help information of replay protection list is updated, and the
maximum number of nodes for Provisioner is adjusted based on the
replay protection list size.
On Xtensa, backtrace can not recover the two most significant bits of
the address, as the window call size is encoded in these bits.
Because of this, __builtin_return_address modifies these MSBs to
match those of the callee, "fixing" the address. An unfortunate side
effect is that the zero return address, which usually terminates the
backtrace, gets converted to 0x40000000. While there is a valid
instruction at this address, its occurrence in the backtrace is
highly unlikely: this is the first instruction of WindowOverflow4
vector, and IDF apps switch VECBASE to an IRAM location very early at
startup.
Commit fc03161f updated esp_ota_get_app_elf_sha256 to store and return
X number of bytes of the hash, but the test case still expected 64 bytes.
Updated test case to use CONFIG value for expected length.
This is a regression from earlier commit related to TLSV12 which used
sha functions that are currently declared static.
Solution: Follow upstream code structure and resolve the errors.
1. add enable PSRAM 2T mode function
2. abort when himem and 2T mode are enabled meanwhile
3. set SPIRAM_2T_MODE as "n" by default, enable it when needed
1. Fix WiFi log print level
2. Optimize WiFi/BT coexist sleep
- If any data tx/rx in WiFi slice, fore wakeup next TBTT
- Increase active timeout time to coex TBTT interval to avoid sleep in WiFi slice
3. Fix esp_wifi_stop() crash
esp_wifi_stop() crashes if it's called when WiFi is not initialized.
4. Fix esp_wifi_stop() leads to memory leak
5. esp_wifi_sta_get_ap_info() returns actual values of group ciphers
It is not possible to write to Flash when the stack is located in
PSRAM, and it is not possible to write PSRAM buffers into Flash when
malloc can not be used.
and all ECDSA to be disabled if secure boot is not enabled
Previously if ECDSA disabled in config then secure_boot_signatures.c would
fail to build (whether or not secure boot was enabled).
To avoid breaking apps that might be using the signature scheme with custom OTA
without enabling secure boot signatures in config, this change just disables
this functionality if unavailable in mbedTLS config.
Possible fix for root cause of https://github.com/espressif/esp-idf/pull/3703
Closes https://github.com/espressif/esp-idf/issues/4758
Wifi_provisioning: Change service_uuid to non standard 128 bit UUID and add retries in test script (backport v4.0)
See merge request espressif/esp-idf!8163
Using the ble mesh white list test functions, a node can choose to
only receive mesh messages from a specific node and relay the
messages for it. Messages from other nodes will be ignored.
1,Reduce WiFi bin size
2,Add TX packets size check
3,Fix scan get rssi error
4,Add wifi stop check at WiFi deinit entry
5,coex adjust scheme when bt is connected status
6,Return fail when setting AP's channel is out of range
7,Fix the bug for setting channel when WiFi in NULL mode
When a handler instance is the last one in the list und unregisters
itself, the handler iterator will be invalidated by entering free'd
memory. Same applies for event base and id, if they become empty.
Merges https://github.com/espressif/esp-idf/pull/4139
