Ivan Grokhotkov
c61c2a63d0
unity: flush test name before starting the test, use printf everywhere
...
Unit test runner expects to see the test name echoed after test
selection is made. If the unit test immediately goes into sleep mode,
UART output will not be complete, and test runner will not see the
test name. This flushes the stream buffer and waits for UART FIFO to
be empty before starting the test.
Additionally some parts of code used unity_printf and some used
printf. Since unity_printf was only useful during very early tests
when newlib was not available, replace all its usages with printf.
2018-04-26 18:52:45 +08:00
He Yin Ling
fee844d22c
unit-test-app: support multi stages test
2018-03-30 11:38:49 +08:00
houchenyao
cb3c88fb2f
unit-test-app: use '-' to show test history
2018-02-05 06:58:22 +00:00
houchenyao
7a31b93fa3
unit-test-app: support multiple devices test cases:
...
current unit-test-app don't support test components need to communicate
with each other (like GPIO, SPI ...). Now we add multiple devices mode
to unit test app, support writing and running test with multiple DUTs.
please refer to `docs/api-guides/unit-tests.rst` for detail.
2017-12-07 13:57:26 +08:00
Ivan Grokhotkov
6e1453e864
Merge branch 'feature/bot' into 'master'
...
CI: support customize test with @bot
See merge request !1502
2017-11-21 18:43:56 +08:00
Ivan Grokhotkov
2eae440646
unit-test-app: reduce startup delay, clean up
2017-11-20 17:51:27 +08:00
Ivan Grokhotkov
5117364c13
unit-test-app: don't print the list of tests by default
...
This reduces unit-test-app startup time when there are a lot of tests
included, speeding up unit tests in CI.
2017-11-20 17:51:27 +08:00
He Yin Ling
9395a702ef
test: check and collect performance via CI
2017-11-16 17:48:30 +08:00
Ivan Grokhotkov
59b7d98fec
Merge branch 'feature/dfs' into 'master'
...
Dynamic frequency scaling
See merge request !1189
2017-10-22 12:34:11 +08:00
Ivan Grokhotkov
90bbcbcdc0
unit tests: fix warnings, build with -Werror
...
- libsodium: silence warnings
- unit tests: fix warnings
- spiram: fix warnings
- ringbuf test: enable by default, reduce delays
2017-10-19 21:35:23 +08:00
Ivan Grokhotkov
bfeecd2b56
freertos: deprecate XT_CLOCK_FREQ
...
- freertos: add deprecated definition for XT_CLOCK_FREQ
- flash_ops: don't use XT_CLOCK_FREQ
- unity: don't use XT_CLOCK_FREQ
- hw_random: don't use XT_CLOCK_FREQ
- core_dump: don't use XT_CLOCK_FREQ
- app_trace: don't use XT_CLOCK_FREQ
- xtensa_init: init xt_tick_divisor
2017-10-18 14:19:19 +08:00
Ivan Grokhotkov
2b3325b1ab
unit tests: fix ref_clock value obtained due to overflow
2017-10-18 14:19:15 +08:00
Angus Gratton
69e92ee320
unit tests: If heap tracing is enabled in sdkconfig, leak trace each test
2017-10-17 15:29:25 +08:00
Angus Gratton
6f07e0797d
Unit tests: If a test fails due to corrupting memory, don't print a misleading source file name
2017-10-17 14:46:08 +08:00
Angus Gratton
0dd9b899b7
periph_ctrl: Refactor to add periph_module_reset(), avoid potential race in SPI DMA workaround
...
Also refactor use of direct clock access in unit test ref_clock (probably not a real issue)
2017-10-02 17:48:16 +11:00
michael
7370f2913d
test: update the format of TEST_ASSERT macro series in `unity.c`
2017-09-27 19:56:46 +08:00
Ivan Grokhotkov
01c0c4b661
unit-test-app: initialize partition table info before starting the test
2017-09-19 10:39:44 +08:00
Angus Gratton
5222428dde
unit tests: Check heap integrity after each test, check for obvious leaks
2017-09-07 16:32:05 +10:00
Ivan Grokhotkov
9a2c62cf2b
unity: add reference clock for use in unit tests
2017-09-01 10:34:36 +08:00
Ivan Grokhotkov
80486240c6
unity: log error codes as hex
...
Error codes are normally defined as hex numbers in header files, so
changing the assert macro to print them as hex as well.
2017-08-29 08:35:23 +08:00
houchenyao
cf64c7e9a6
unit test: add sd env and spi env for sdmmc
2017-08-22 21:01:34 +08:00
Angus Gratton
5dca92377d
test runner: Print test name when starting, print filter description
...
Makes it easier to run tests manually.
2017-06-26 15:38:46 +10:00
Anton Maklakov
91718cc776
unit-test-app: Fix incorrect CR+LF sequence.
...
This caused problems with handling output by grep, sed, etc
2017-06-05 10:51:48 +08:00
Anton Maklakov
144d345b3b
unit-test-app: Fix capability to use !<filter> to inverse that filter
2017-06-01 12:23:14 +08:00
Angus Gratton
ca4f5b9ee6
unit test runer: Add capability to use ![tag] to run all-tests-except-tag
...
Mostly useful for running ![ignore] to skip ignored tests.
2017-05-10 17:22:30 +10:00
Ivan Grokhotkov
a428af8c9f
unit tests: change type of flash_test partition to ‘fat’
...
This change makes the spi_flash test partition usable for WL and FATFS
tests.
2017-05-05 15:21:37 +08:00
Angus Gratton
45581dbaca
freertos: Delay context switch from queue/task APIs until exiting critical section
...
Closes #374 : https://github.com/espressif/esp-idf/issues/374
2017-04-04 10:10:08 +10:00
Angus Gratton
8352e7e9ec
unit test: Measure test wall time with CCOUNT, so it includes time w/ interrupts off
2017-03-22 15:35:54 +08:00
antti
1e2c5cc151
fix unit test app to print tests in the same order they are given in files
2017-03-13 12:06:49 +08:00
Angus Gratton
f687725e97
unit tests: Use a unit test app partition table, configure spi_flash to use data partition
2017-02-22 10:26:04 +11:00
Ivan Grokhotkov
5b2888e113
unity: fix testcase initializer for compiling with C++
2017-01-06 14:56:02 +08:00
Angus Gratton
69df54a28c
unit-test-app: Don't auto-display menu after test run finishes
...
Previous code sometimes menu multiple times, depending on UART activity.
2016-12-06 11:25:31 -08:00
antti
d390449371
add unit tests to esp-idf
...
rename nvs host test folder, modify .gitlab-ci.yml
remove unit-test-app build
re-format unit test files
remove extra newlines in project.mk
some refactoring for unit test part in project.mk
add build files of unit-test-app in gitignore
add README.md for unit test app
correct headings in README.md
remove files and make minor tweaks in unit test app
update .gitlab-ci.yml to use unit test app
delete unused lines in component_wrapper.mk
delete periph_i2s.h and lcd test
add text floating point in components/esp32/test/Kconfig
correct idf test build paths in .gitlab-ci.yml
2016-11-22 14:45:50 +08:00
