Jiang Jiang Jian
d321c0603e
Merge branch 'bugfix/update_wifi_mesh_example' into 'master'
...
fix(wifi/mesh): fixed the netif issue when root restart multiple times
See merge request espressif/esp-idf!32200
2024-08-01 10:33:49 +08:00
xuxiao
c6104388aa
feat(wifi): add wifi support for esp32c5 mp
2024-07-24 18:03:40 +08:00
zhangyanjiao
5ca25c81ff
fix(wifi/mesh): update the mesh ip_internal_network example
2024-07-18 14:13:55 +08:00
zhangyanjiao
751b103ddc
fix(wifi/mesh): fixed the dhcp offer send error issue when root restart multiple times
...
Closes https://github.com/espressif/esp-idf/issues/13212
2024-07-18 11:28:44 +08:00
yinqingzhao
d6a14c2641
fix(wifi):esp32c6 update ld
2024-06-13 11:25:55 +08:00
liuning
5314cf8aee
example: add custom partition table for mesh manual networking
2024-02-27 09:45:21 +08:00
Li Shuai
28835624d9
fix(example): fixed app partition is too small for binary size
2024-01-11 10:42:38 +08:00
Harshit Malpani
bbbede07d0
fix(partition_table): Check partition size for type APP
...
The size of partition of type APP should be multiple of 4 KB. Partition
generation tool now make this as a mandatory requirement. This is
minimum flash erase size. If the size of the APP type partition is not
aligned to 4 KB then the last erase operation could go beyond the allocated
partition and hence may fail. This issue would only be observed when the
firmware size grows very close to the allocated partition size, and hence
causing the OTA update to fail.
For already deployed devices on-field with the size of APP partition not
aligned to flash sector boundary, it is best to ensure that firmware
size always remains within the lower 4 KB boundary of the total
allocated space. While migrating to ESP-IDF 5.3 release, partition table
for an existing project can be adjusted accordingly for the build to
succeed.
Found during discussion in https://github.com/espressif/esp-idf/pull/12460
2023-12-11 10:14:57 +05:30
zhangyanjiao
7cd1115815
fix(wifi/mesh): fix the IE crypto disable error and update doc
2023-11-08 10:24:45 +08:00
KonstantinKondrashov
e72061695e
all: Removes unnecessary newline character in logs
...
Closes https://github.com/espressif/esp-idf/issues/11465
2023-06-09 03:31:21 +08:00
xueyunfei
03a50a0d13
Fixed bug for stop dhcps before set dns
...
Closes https://github.com/espressif/esp-idf/issues/10762
2023-03-23 15:38:24 +08:00
David Čermák
956e62c461
Merge branch 'feature/lwip_ipv6_only' into 'master'
...
lwip: Support IPv6 only mode
Closes IDF-6023
See merge request espressif/esp-idf!20468
2023-03-01 21:38:10 +08:00
David Cermak
5f6cb31105
lwip: Support IPv6 only mode
2023-02-27 08:53:34 +01:00
muhaidong
f72576684c
wifi_mesh: Remove-Wno-format compile option for mesh examples
2023-02-08 02:32:07 +00:00
Cao Sen Miao
94120b82c2
esp32h2: add build test
2023-01-17 10:29:04 +08:00
Chen Yudong
c07d237ffe
examples: enable build esp32c6 for wifi and network examples
2023-01-12 14:50:06 +08:00
Song Ruo Jing
2557e24a28
ci: Enable esp32c6 example, test_apps, and unit tests CI build stage
2022-11-01 11:23:21 +08:00
Ivan Grokhotkov
e596c84d49
build system: re-add -Wno-format as private flag for some example components
2022-08-03 16:42:47 +04:00
Euripedes Rocha
ff1c405ed1
[MQTT] - Updates esp_mqtt configuration struct
...
- Layered config struct
- Fix examples.
2022-07-15 12:32:50 -03:00
Fu Hanxi
c0568611dd
docs: changes docs supported targets tables
2022-07-14 08:26:32 +08:00
Fu Hanxi
05d2357062
feat: use standalone project idf-build-apps for find/build apps utils
2022-07-14 08:26:31 +08:00
Michael (XIAO Xufeng)
f7be540222
ci: partially enable example build for esp32c2
2022-06-02 14:17:31 +08:00
Djordje Nedic
facab8c5a7
tools: Increase the minimal supported CMake version to 3.16
...
This updates the minimal supported version of CMake to 3.16, which in turn enables us to use more CMake features and have a cleaner build system.
This is the version that provides most new features and also the one we use in our latest docker image for CI.
2022-06-01 06:35:02 +00:00
David Cermak
79d1865d62
examples: Fix IP mesh implicit includes
2022-03-10 08:19:43 +01:00
Sudeep Mohanty
a9fda54d39
esp_hw_support/esp_system: Re-evaluate header inclusions and include directories
...
This commit updates the visibility of various header files and cleans up
some unnecessary inclusions. Also, this commit removes certain header
include paths which were maintained for backward compatibility.
2022-03-07 11:18:08 +05:30
Darian Leung
57fd78f5ba
freertos: Remove legacy data types
...
This commit removes the usage of all legacy FreeRTOS data types that
are exposed via configENABLE_BACKWARD_COMPATIBILITY. Legacy types can
still be used by enabling CONFIG_FREERTOS_ENABLE_BACKWARD_COMPATIBILITY.
2022-02-09 23:05:45 +08:00
shenjun
f646e7759d
esp_wifi_mesh: fix the device can not receive IP_EVENT_STA_GOT_IP when the router restarted
2021-12-16 17:18:47 +08:00
Roland Dobai
766aa57084
Build & config: Remove leftover files from the unsupported "make" build system
2021-11-11 15:32:36 +01:00
shenjun
42a1be10db
esp_wifi_mesh: add non mesh connections access
2021-07-30 22:17:30 +08:00
shenjun
f9fe524c32
mesh/ps: network duty signaling
2021-03-18 16:22:19 +00:00
yuanjm
ca037eba9b
examples: Update mqtt open source test server address
2021-02-23 15:29:07 +08:00
xiehang
dffbce9813
esp_wifi: Modify ESP_IF_WIFI_AP to WIFI_IF_AP
2021-01-19 11:58:04 +08:00
xiehang
b8a8fe3f54
esp_wifi: Modify ESP_IF_WIFI_STA to WIFI_IF_STA
2021-01-19 11:55:44 +08:00
xiehang
d9e1d51ec8
example: Scan failure should not cause system crash
2021-01-15 11:45:23 +00:00
Angus Gratton
66fb5a29bb
Whitespace: Automated whitespace fixes (large commit)
...
Apply the pre-commit hook whitespace fixes to all files in the repo.
(Line endings, blank lines at end of file, trailing whitespace)
2020-11-11 07:36:35 +00:00
David Cermak
cfbcb9f21e
examples, esp_mesh: Fix internal ip mesh example to use transmit wrap function
...
Fixed regression caused by recent refactoring of WiFi Tx. If wasn't defined all transmits end up in a crash.
Closes https://github.com/espressif/esp-idf/issues/6067
2020-11-09 20:32:58 +01:00
morris
a4d0033c03
esp_rom: extract common GPIO apis into esp_rom_gpio.h
2020-07-07 11:40:19 +08:00
chenyudong
ca7f2099db
example: fix mesh manual networking example
...
Solves https://www.esp32.com/viewtopic.php?f=21&t=8610
2020-05-15 18:39:16 +08:00
qiyuexia
4522ef8798
mesh: add duty cycle control and support only transmit/receive in actve duty cycle
2020-05-05 18:06:47 +08:00
David Cermak
9e58d94a42
esp-mesh: Added example showing internal IP capable mesh network
2020-04-24 07:32:58 +02:00
qiyuexia
6d01dc4cfa
mesh/ps: add mesh network power save function
2020-04-01 22:09:23 +08:00
qiyuexia
7bd03faa4b
mesh: add chain topology
2020-03-09 06:00:42 +00:00
David Cermak
31b2702387
esp_netif, examples: esp_netif_init() moved into ESP_ERROR_CHECK()
...
esp_netif_init() returns standard esp_err_t error code (unlike tcpip_adapter init), so shall be checked for the return value
Also to make the initialization code more consistent.
2019-12-17 09:07:49 +01:00
David Cermak
4857e92e2c
esp_mesh: creation of wifi network interfaces for esp-mesh examples moved to used common esp_wifi_default API
2019-11-13 12:36:26 +01:00
David Cermak
20add7da60
esp_netif: extract wifi_netif module as an abstraction to wifi universal interface defined by if handle and callback
2019-11-13 12:36:25 +01:00
David Cermak
3a19bf055d
esp_netif and examples: using wifi driver handle, update examples and tests to pass the CI
2019-11-13 12:36:25 +01:00
David Cermak
0eec84bc4f
mesh_examples: use esp_netif instead of tcpip_adapter
2019-11-13 12:36:25 +01:00
David Cermak
ec9f245dd3
examples: removed ip4addr_ntoa and used prefered IP2STR for displaying IP addresses
2019-11-13 12:36:25 +01:00
Angus Gratton
adfc06a530
Merge branch 'master' into feature/esp32s2beta_merge
2019-09-20 10:28:37 +10:00
Angus Gratton
f406d020d8
driver: Remove features deprecated pre-IDF V4.0
2019-09-13 09:44:07 +10:00
