1. Use PSRAM for BLE Mesh mutex, queue and task
2. Add a parameter for esp_ble_mesh_deinit()
3. Add a option to enable using memory from PSRAM
4. Provisioner use internal static oob length
5. Update ble mesh tx rx test examples
6. Clear ble coexistence status bit by bit
7. Fix an issue which fails to store comp data
1. Add local AppKey and NetKey update APIs
2. NULL can be input if message has no parameters
3. Fix compile warning when BT log is disabled
4. Initilize mesh stack local variables
5. Use the latest coexist functions
1. Add an API to get node with device uuid
2. Add an API to get node with unicast address
3. Add an API to delete node with device uuid
4. Add an API to delete node with unicast address
1. Store node name in nvs when Provisioner sets node name
2. Add an API to store node composition data
3. Update lightness last when lightness actual is changed
4. Add ble mesh english/chinese documents
5. Update ble mesh tx/rx test example
6. Add params to provisioner bind appkey comp event
7. Fix node ignoring relay messages issue
8. Fix PreviousAddress endianess in Friend Request
9. Support using a specific partition for ble mesh
10. Fix compile warning when proxy related macros are disabled
11. Not using internal macros in esp_ble_mesh_defs.h
12. No device address needed when PB-ADV is used
1. Deinit unprov_dev table and fast prov info
2. Fix an issue which may cause failing to send msg
3. Add deinit test into the coex_a2dp_mini example
4. Add an API esp_ble_mesh_provisioner_set_primary_elem_addr
5. Use bt_mesh.flags to indicate device role
6. Fix Provisioner entering IV Update procedure
7. Remove some useless macros
8. Callback rssi of received mesh provisioning packets
9. Modify the Provisioner disable function
10. Provisioner can provision devices with fixed addresses
11. Change some log level from debug to info
12. Add an API for Provisioner to get provisioned node info
1. Add buf ref debug in adv_send
2. Use different locks for different items
3. Remove useless CONFIG_BLE_MESH_NODE
4. Modify lock used during provisioning
5. Add lock for message transport
6. Fix memory leak when node is reset
7. Remove static flag in provisioner init
8. Fix Provisioner lock and init issues
9. Rename some Provisioner related functions
10. Add an API to set Provisioner static oob value
Level 4 interrupt has a chance of preempting a window overflow or
underflow exception. Therefore it is not possible to use standard
context save functions, as the SP on entry to Level 4 interrupt may
be invalid (e.g. in WindowUnderflow4).
Instead, mask window overflows and save the entire general purpose
register file, plus some of the special registers. Then clear
WindowStart, allowing the C handler to execute without spilling the
old windows. On exit from the interrupt handler, do everything
in reverse.
The API is used to dump WiFi lmac/hmac/wpa key statistics, which is helpful for
WiFi issue debugging. The application need to call the API at the moment potential
problem happens, such as:
1. When receiving WiFi disconnect event
2. When receiving IP lost event
3. When sockets failed, such as TX or RX timeout etc
4. Any other places that the application suspect the WiFi works incorrectly
1. Fix force WiFi impacts WiFi receiving data in unforce WiFi status.
2. Increase sleep delay time to 7ms to improve success ratio of sending NULL data.
1. Fix assert in ld_fm.c line 371 due to double clk isr
2. Fix assert(25, 0) in lc_task.c
3. Fix assert due to different rxlinklbl
4. Fix assert due to different of currentrxdescptr and rxdone is not 0
