Commit Graph

37 Commits

Author SHA1 Message Date
Ivan Grokhotkov
5f6be9b4ce esp32: reconfigure SPI flash pins in esp_restart 2017-11-06 16:44:26 +08:00
Jiang Jiang Jian
abacf8d2a0 Merge branch 'bugfix/rtc_and_restart_fixes' into 'master'
rtc_clk and esp_restart fixes

See merge request !1458
2017-11-04 01:34:38 +08:00
Ivan Grokhotkov
a02b30ccda efuse: add package definitions for PICOD2/D4 2017-11-03 15:49:10 +08:00
Ivan Grokhotkov
eb5752c635 esp_restart: fix possible race while stalling other CPU, enable WDT early
Previously esp_restart would stall the other CPU before enabling RTC_WDT.
If the other CPU was executing an s32c1i instruction, the lock signal
from CPU to the arbiter would still be held after CPU was stalled. If
the CPU running esp_restart would then try to access the same locked
memory pool, it would be stuck, because lock signal would never be
released.

With this change, esp_restart resets the other CPU before stalling it.
Ideally, we would want to reset the CPU and keep it in reset, but the
hardware doesn't have such feature for PRO_CPU (it is possible to hold
APP_CPU in reset using DPORT register). Given that ROM code will not use
s32c1i in the first few hundred cycles, doing reset and then stall seems
to be safe.

In addition to than, RTC_WDT initialization is moved to the beginning of
the function, to prevent possible lock-up if CPU stalling still has any
issue.
2017-10-26 19:53:53 +08:00
Jeroen Domburg
740f8a79f0 Add logic to make external RAM usable with malloc() 2017-09-28 17:17:50 +08:00
Jeroen Domburg
0e74ec67be Fix rebooting when PSRAM is active 2017-09-04 19:00:47 +08:00
Ivan Grokhotkov
65b046f17f dport access: introduce pause/resume instead of deinit 2017-09-01 10:36:14 +08:00
Kedar Sovani
159e7e81b4 esp32: Make 'restart' function independent of Wi-Fi
Restart being a lower-layer system-level function, needn't depend on
the higher level Wi-Fi libraries.

This also enables us to get rid of one more WIFI_ENABLED ifdef check
2017-08-16 15:54:28 +05:30
Ivan Grokhotkov
7fc25f18d2 Merge branch 'feature/enable_brownout_detector' into 'master'
Enable brownout detector

See merge request !811
2017-07-13 11:40:37 +08:00
Angus Gratton
71c70cb15c heap: Refactor heap regions/capabilities out of FreeRTOS
Remove tagged heap API, rename caps_xxx to heap_caps_xxx

Also includes additional heap_caps_xxx inspection functions.
2017-07-10 17:46:03 +08:00
Ivan Grokhotkov
780569c04a esp32: fix RTC watchdog configuration in esp_restart
RTC watchdog didn’t have any actions configured for any of the stages.
This change configures it to use SW_SYSTEM_RESET at stage 0 and a
full reset at stage 1. The timeout is now calculated based on
RTC_SLOW_CLK frequency.
2017-07-10 17:21:49 +08:00
Ivan Grokhotkov
a054ced740 esp_chip_info: populate ‘model’ field 2017-07-06 11:01:40 +08:00
Ivan Grokhotkov
8cb0d52c43 esp_system: remove link time dependency on WiFi stack
- esp_restart will not pull in WiFi stack (if it is not used otherwise)
- esp_restore is moved into a separate file to break link time
  dependency
2017-06-15 18:15:36 +08:00
Ivan Grokhotkov
9353666cc1 esp32: reset APP CPU when doing esp_restart
This fixes a bug introduced by !848, where APP CPU would not be reset
during esp_restart, if esp_restart was called from a task running on APP
CPU, and wouldn’t be reset by PRO CPU on startup.
This change replaces stalling APP CPU with resetting it.

Also adds a non-automated esp_restart tests.
2017-06-15 18:15:35 +08:00
Ivan Grokhotkov
a72b1abc51 esp32: disable DPORT access protection when doing esp_restart
DPORT access protection can not work when the other CPU is stalled.
Writes to DPORT registers in esp_restart caused the program to hang due
to access protection, and the reset happened due to RTC_WDT, not SW_RST.
This change adds esp_dport_access_int_deinit function and calls it from
esp_restart once the other core is stalled.
2017-06-15 18:15:35 +08:00
Ivan Grokhotkov
15a6145961 Merge branch 'feature/get_chip_ver' into 'master'
add API to get chip info

This change adds an API to get chip info, such as chip model, enabled capabilities, size of embedded flash, silicon revision.

Hello_world example is modified to print out the information about the chip. The example is also simplified by moving all code into the main task.

Ref TW12031.

See merge request !549
2017-05-11 12:05:55 +08:00
Ivan Grokhotkov
c742f7d860 Merge branch 'feature/base_mac_address' into 'master'
Optimize configuration of base MAC address

Application developer can call APIs to configure base MAC address
instead of using menuconfig.

See merge request !744
2017-05-11 12:01:51 +08:00
XiaXiaotian
b22067a8f0 Optimize configuration of base MAC address
Application developer can call APIs to configure base MAC address
    instead of using menuconfig.
2017-05-10 10:15:07 +08:00
Tian Hao
26a3cb93c7 component/soc : move dport access header files to soc
1. move dport access header files to soc
2. reduce dport register write protection. Only protect read operation
2017-05-09 18:06:00 +08:00
Tian Hao
f7e8856520 component/esp32 : fix dualcore bug
1. When dual core cpu run access DPORT register, must do protection.
2. If access DPORT register, must use DPORT_REG_READ/DPORT_REG_WRITE and DPORT_XXX register operation macro.
2017-05-08 21:53:43 +08:00
Ivan Grokhotkov
2260c714e7 add esp_chip_info API 2017-05-05 17:28:30 +08:00
XiaXiaotian
5553fbd537 add base MAC address storage choice.
Base MAC address can be stored in default manufacture-defined or customer
    pre-defined place in EFUSE and other place e.g. flash or EEPROM.
    If choose to use base MAC address which is stored in other place, please
    call esp_base_mac_addr_set_external() before initializing WiFi/BT/Ehternet.
2017-04-21 14:55:11 +08:00
XiaXiaotian
03e2618d35 Add customer MAC address that read from efuse 2017-04-17 21:24:15 +08:00
Ivan Grokhotkov
7ee8ee8b7e soc: add source code of rtc_clk, rtc_pm 2017-04-11 15:45:54 +08:00
Jiang Jiang Jian
3b8c9a407f Merge branch 'feature/add_user_set_mac' into 'master'
Feature/add user set mac

1. Add menuconfig for user to set mac address of wifi, bt and ethernet.
2. Add the number of MAC address generated from efuse for user to choose.
3. Add MAC address derive method.

See merge request !542
2017-03-02 17:34:14 +08:00
XiaXiaotian
d3eede2110 mac address: add the number of MAC address generated from efuse for user to choose
1. Add the number of MAC address generated from efuse for user to choose.

2. Add MAC address derive method.
2017-03-02 15:54:35 +08:00
XiaXiaotian
fabe0493c2 mac address: add user set mac address
add menuconfig for user to set mac address of wifi, bt and ethernet.
2017-03-01 20:51:49 +08:00
Angus Gratton
98f8594151 esp32 dport_reg.h: Fix typo in register bit names 2017-03-01 12:01:07 +11:00
Wu Jian Gang
f4d5d151aa esp32: add get idf version api 2017-01-17 16:52:42 +08:00
Ivan Grokhotkov
6538252552 Merge branch 'bugfix/panic_reset_hangs' into 'master'
Panic handler: Use same reset path as esp_restart(), disabling hardware

Closes #223 https://github.com/espressif/esp-idf/issues/223

See merge request !417
2017-01-16 10:40:47 +08:00
Angus Gratton
ea19838d3a Build: Handle WiFi & BT enabled/disabled combos gracefully as possible
If using WIFI_INIT_CONFIG_DEFAULT, error message will point out lack
of WiFi. Otherwise linker errors on WiFi symbols should help give a
clue as to what is broken.

Piggy-backs on changes in !420, ref github #230 #237
2017-01-16 13:03:17 +11:00
Angus Gratton
e53d307814 Panic handler: Use same reset path as esp_restart(), disabling hardware
Closes #223 https://github.com/espressif/esp-idf/issues/223
2017-01-13 14:37:36 +11:00
shangke
0e701e1cac ethernet: support flow control 2017-01-10 15:19:18 +08:00
Angus Gratton
2e3ca1c2f7 bootloader: Boost bootloader CPU to 80MHz
Partially needed to use RNG, also useful to improve boot performance.
2017-01-04 16:07:19 +11:00
Ivan Grokhotkov
b57aecdfe9 uart_tx_wait_idle: fix issue with last character not transmitted
- ROM function uart_tx_wait_idle may have a bug which causes the function to return before the final character is fully transmitted.
  This replaces uart_tx_wait_idle declaration with a static inline definition which fixes the issue.
- Also replaces the use of uart_tx_flush with uart_tx_wait_idle in esp_restart, to remove garbage in console output on restart.
- rtc_printf is temporary replaced with a no-op, pending a new release of librtc.a. Current release assumes that UART0 is used for output,
  and switches UART0 baud rate while doing frequency changes and printing some log output. This doesn’t work if a different UART is used for output.
2016-12-08 01:42:37 +08:00
Ivan Grokhotkov
df6edb50e9 implement esp_deep_sleep, fix build issues 2016-11-22 21:54:49 +08:00
Ivan Grokhotkov
8b2f933a51 Implement system_* APIs in IDF 2016-11-22 21:14:36 +08:00