Commit Graph

624 Commits

Author SHA1 Message Date
Ivan Grokhotkov
e1846df542 Merge branch 'feature/app_trace_to_host_example' into 'master'
Example on using application trace and logging to host

See merge request !1082
2017-08-24 14:30:28 +08:00
Ivan Grokhotkov
10f0543080 console: add support for terminal probing and dumb terminal mode 2017-08-21 15:58:28 +08:00
Ivan Grokhotkov
5de7c91a54 add console component and example 2017-08-21 15:58:27 +08:00
krzychb
78a0523757 Example on use application trace logging to host 2017-08-19 15:44:06 +02:00
Angus Gratton
5eef5e7a5d bootloader: Fallback if OTA data is invalid
Make bootloader more robust if either OTA data or some OTA app slots are corrupt.
2017-08-15 09:42:19 +10:00
Ivan Grokhotkov
979fce0df5 bt: call nvs_flash_init in examples, show error if NVS is not initialized
NVS is used to store PHY calibration data, WiFi configuration, and BT
configuration. Previously BT examples did not call nvs_flash_init,
relying on the fact that it is called during PHY init. However PHY init
did not handle possible NVS initialization errors.

This change moves PHY init procedure into the application, and adds
diagnostic messages to BT config management routines if NVS is not
initialized.
2017-07-17 21:29:50 +08:00
Ivan Grokhotkov
7abd9bc023 ULP: remove deprecated cycle_sel field from ADC instruction
Cycle_sel field was never used in binutils and was always set to zero.
This change removes it from documentation and examples.

Needs ULP binutils with this change:
https://github.com/espressif/binutils-esp32ulp/commit/af79434
2017-05-31 18:22:48 +08:00
Ivan Grokhotkov
3c583a7655 sdkconfig: set CONFIG_ESP32_DEEP_SLEEP_WAKEUP_DELAY=2000 by default
To increase the chances that the examples work out of the box, this
change is raising the default deep sleep wakeup delay to 1ms.
If GPIO15 is low at startup, ROM code takes less time to execute
(because no logging is performed), so more time may be needed to allow
flash chip to become ready.
2017-05-25 10:51:39 +08:00
Ivan Grokhotkov
98e15df7f6 examples: add ULP ADC example 2017-05-16 13:15:02 +08:00
XiaXiaotian
b22067a8f0 Optimize configuration of base MAC address
Application developer can call APIs to configure base MAC address
    instead of using menuconfig.
2017-05-10 10:15:07 +08:00
Ivan Grokhotkov
6353bc40d7 Add support for 32k XTAL as RTC_SLOW_CLK source
- RTC_CNTL_SLOWCLK_FREQ define is removed; rtc_clk_slow_freq_get_hz
  function can be used instead to get an approximate RTC_SLOW_CLK
  frequency

- Clock calibration is performed at startup. The value is saved and used
  for timekeeping and when entering deep sleep.

- When using the 32k XTAL, startup code will wait for the oscillator to
  start up. This can be possibly optimized by starting a separate task
  to wait for oscillator startup, and performing clock switch in that
  task.

- Fix a bug that 32k XTAL would be disabled in rtc_clk_init.

- Fix a rounding error in rtc_clk_cal, which caused systematic frequency
  error.

- Fix an overflow bug which caused rtc_clk_cal to timeout early if the
  slow_clk_cycles argument would exceed certain value

- Improve 32k XTAL oscillator startup time by introducing bootstrapping
  code, which uses internal pullup/pulldown resistors on 32K_N/32K_P
  pins to set better initial conditions for the oscillator.
2017-04-26 12:43:22 +08:00
rudi ;-)
e5012bd07e OTA example readme: [typo]: Worflow to Workflow
Merges PR #507 https://github.com/espressif/esp-idf/pull/507
2017-04-21 11:03:07 +10:00
Angus Gratton
40a35db784 Merge branch 'bugfix/example_naming' into 'master'
examples: Standardise naming of files, symbols, etc. in examples

* Use "example" in all example function & variable names,
  ie use i2c_example_xxx instead of i2c_xxx for example functions.
  Closes #198 https://github.com/espressif/esp-idf/issues/198
* Mark example functions, etc. static
* Replace uses of "test" & "demo" with "example"
* Split the UART example into two
* Rename "main" example files to end with "_main.c" for disambiguation

See merge request !601
2017-03-29 08:50:49 +08:00
Angus Gratton
821c70f5d7 examples: Standardise naming of files, symbols, etc. in examples
* Use "example" in all example function & variable names,
  ie use i2c_example_xxx instead of i2c_xxx for example functions.
  Closes #198 https://github.com/espressif/esp-idf/issues/198
* Mark example functions, etc. static
* Replace uses of "test" & "demo" with "example"
* Split the UART example into two
* Rename "main" example files to end with "_main.c" for disambiguation
2017-03-27 17:42:05 +11:00
Dmitry Yakovlev
a6e4e89592 ulp: add build system integration and example 2017-03-27 12:41:00 +08:00
Ivan Grokhotkov
4813ab2d28 examples: check return value of nvs_flash_init
nvs_flash_init may return an error code in some cases, and applications
should check this error code (or at least assert on it being ESP_OK, to
make potential issues more immediately obvious).

This change modifies all the examples which use NVS to check the error
code. Most examples get a simple ESP_ERROR_CHECK assert, while NVS
examples, OTA example, and NVS unit tests get a more verbose check which
may be used in real applications.
2017-03-15 10:44:54 +08:00
Ivan Grokhotkov
66c693eebb Merge branch 'feature/deep_sleep_wakeup_from_touch' into 'master'
add wakeup from touch sensor, and deep sleep example

- add new deep sleep wakeup mode
- change documentation to explain incompatibilities between different wakeup mode, add error checks
- add new ULP instructions necessary for ULP wakeup scenario
- fix issues with I_WR_REG, I_SLEEP, I_END instructions
- add deep sleep example, illustrating the use of timer, gpio, touch, and ULP wakeup triggers

See merge request !461
2017-03-08 14:27:58 +08:00
Ivan Grokhotkov
4af5f572f4 add deep sleep wake up example 2017-02-22 18:40:31 +08:00
Angus Gratton
25f739c183 ota ops: Add new functions esp_ota_get_next_update_partition / esp_ota_get_running_partition
* Update OTA example to use these.
* Refactor esp_ota_begin() to return ESP_ERR_OTA_PARTITION_CONFLICT as documented
2017-02-22 10:24:42 +11:00
Angus Gratton
eea2788f5a OTA: Fix issues with encrypted OTA
- OTA source can write non-16-byte multiples of data
- Assumption that empty ota_data is 0xFFFFFFFF untrue when encrypted
2017-01-26 18:52:35 +11:00
Angus Gratton
67336672bd OTA: Improve verification of OTA image before writing, incl. secure boot
Verify 0xE9 magic byte on first write, verify entire image before
switching.

Enable verification for secure boot signature (was using invalid ifdef
guard)
2017-01-26 16:20:06 +11:00
krzychb
0b6598c492 Added README.md to example category folders 2017-01-18 21:03:15 +01:00
Krzysztof Budzynski
ad25997349 Updated links to examples in new folders / categories in api documentation 2017-01-16 23:08:36 +01:00
Krzysztof Budzynski
382999b378 Moved examples to new folders / categories. Removed example numbers from example names 2017-01-16 23:08:35 +01:00