Commit Graph

236 Commits

Author SHA1 Message Date
Ivan Grokhotkov
3726cd39ab Merge branch 'bugfix/examples_ulp_gpio15' into 'master'
examples/ulp: disable pullup on GPIO15 to reduce current

See merge request !1486
2017-11-13 17:34:12 +08:00
Ivan Grokhotkov
dec4a868d0 examples/ulp: disable pullup on GPIO15 to reduce current
Also increase sampling frequency in ulp_adc example and update READMEs.

Fixes https://github.com/espressif/esp-idf/issues/1108
2017-11-03 18:56:31 +08:00
Darian Leung
9d63e1da4a New Task Watchdog API (Revert of Revert)
This commit reverts the revert on the new task watchdog API. It also
fixes the following bug which caused the reversion.

- sdkconfig TASK_WDT_TIMEOUT_S has been reverted from the unit of ms back to the
unit of seconds. Fixes bug where projects using the new API without rebuilding sdkconfig
would cause the old default value of 5 to be interpreted in ms.

This commit also adds the following features to the task watchdog

- Updated idle hook registration to be compatible with dual core hooks

- Updated dual core hooks to support deregistration for cpu

- Legacy mode has been removed and esp_task_wdt_feed() is now replaced by
  esp_task_wdt_reset().  esp_task_wdt_feed() is deprecated

- Idle hooks to reset are now registered/deregistered when the idle tasks are
  added/deleted from the Task Watchdog instead of at Task Watchdog init/deinit

- Updated example
2017-11-02 16:47:51 +08:00
Ivan Grokhotkov
b6f37bda97 Merge branch 'feature/i2s_built_in_adc' into 'master'
feature(I2S-ADC): add ADC mode for I2S.

See merge request !1077
2017-10-20 15:52:56 +08:00
Ivan Grokhotkov
4d42b5ea24 console: handle empty input to esp_console_run correctly
Fixes https://github.com/espressif/esp-idf/issues/1067

Ref. TW15752
2017-10-13 07:14:53 +08:00
Jeroen Domburg
b6a2bd1184 Revert "esp32: New Task Watchdog API"
This reverts commit 616baa239d.
2017-09-30 18:07:19 +08:00
Darian Leung
616baa239d esp32: New Task Watchdog API
Legacy API of task watchdog used the same function esp_task_wdt_feed() to add
and feed a task. This caused issues of implicitly adding a task to the wdt list
if the function was used in shared code.

The new API introduces init, adding, feeding, deleting, deinit functions. Tasks
must now be explicitly added to the task watchdog using their handles. Deletion
must also be explicit using task handles. This resolves the issue of implicit
task additions to the task watchdog due to shared code calling
esp_task_wdt_feed().

Task watchdog is now fully configurable at runtime by calling the init and
deinit functions.

Also added functions to get the handles of idle tasks of the other core. This
helps when adding idle tasks to the watchdog at run time.

Configuring the task watchdog using menu config is still available, however
menu config will only result in calling the init and add functions for idle
tasks shortly after the scheduler starts.

Menu config also allows for using legacy behavior, however the legacy behavior
willcall the new API functions but with slight variations to make them legacy
compatible.

Documentation and example have also been updated

gcov_rtio.c headers updated to prevent error of freertos header files being
included in the wrong order.

Resolves issue TW#13265
2017-09-29 23:10:55 +08:00
Wangjialin
2fceec4d85 feature(I2S-ADC): add ADC mode for I2S.
1. Support built-in ADC for I2S.
2. Modify code of ADC, made no change to the original APIs.
3. Add APIs in I2S:
esp_err_t i2s_set_adc_mode(adc_unit_t adc_unit, adc1_channel_t adc_channel);
4. Add I2S ADC/DAC example code.
5. add old-fashion definition to make it more compatible
6. replase spi_flash_ APIs with esp_partition_ APIs
7. add example of generating audio table from wav
8. change example sound
2017-09-14 13:24:08 +08:00
Alexey Gerenkov
891f0db31d esp32: Adds gcov over JTAG feature
Implements function to dump GCOV data to host via JTAG.
The following functionality was added:
 - Host file I/O
 - GCOV runtime I/O stubs
 - GCOV example
2017-09-07 18:13:16 +03:00
krzychb
672390c458 Mass replacement of http with https urls, fixed broken urls 2017-09-06 08:16:01 +02:00
Ivan Grokhotkov
d2acf1ce77 sleep: add light sleep, factor out APIs common for deep/light sleep 2017-09-01 10:36:14 +08:00
Darian Leung
88b05f9391 esp_adc_cal: Added ADC calibration component
Added component containg API that is able to correct raw ADC readings
into a voltage in mV. Also provided a helper function that combines
the process of getting the raw ADC1 reading then converting it to a
voltage in mV. In doing so, the adc1_get_voltage() function of the ADC
driver has been deprecated. Instead there is now adc1_get_raw to obtain
the raw ADC1 reading, and adc1_to_voltage() that gets the raw reading
and converts all in one function. Functions using the deprecated
adc1_get_voltage() have also been updated to use adc1_get_raw().

Conversion is based on ADC characteristics. The characteristics are based
on the ADC's v_ref, herefore the appropriate structure and functions have
been provided to obtain the ADC characteristics.

The existing ADC driver has also been modified by adding a function to
route the internal ADC reference voltage to a GPIO allowing users to measure
it manually.

Relevant documentation has also been updated
2017-08-29 18:43:14 +08:00
Ivan Grokhotkov
e1846df542 Merge branch 'feature/app_trace_to_host_example' into 'master'
Example on using application trace and logging to host

See merge request !1082
2017-08-24 14:30:28 +08:00
Ivan Grokhotkov
10f0543080 console: add support for terminal probing and dumb terminal mode 2017-08-21 15:58:28 +08:00
Ivan Grokhotkov
5de7c91a54 add console component and example 2017-08-21 15:58:27 +08:00
krzychb
78a0523757 Example on use application trace logging to host 2017-08-19 15:44:06 +02:00
Angus Gratton
5eef5e7a5d bootloader: Fallback if OTA data is invalid
Make bootloader more robust if either OTA data or some OTA app slots are corrupt.
2017-08-15 09:42:19 +10:00
Ivan Grokhotkov
979fce0df5 bt: call nvs_flash_init in examples, show error if NVS is not initialized
NVS is used to store PHY calibration data, WiFi configuration, and BT
configuration. Previously BT examples did not call nvs_flash_init,
relying on the fact that it is called during PHY init. However PHY init
did not handle possible NVS initialization errors.

This change moves PHY init procedure into the application, and adds
diagnostic messages to BT config management routines if NVS is not
initialized.
2017-07-17 21:29:50 +08:00
Ivan Grokhotkov
7abd9bc023 ULP: remove deprecated cycle_sel field from ADC instruction
Cycle_sel field was never used in binutils and was always set to zero.
This change removes it from documentation and examples.

Needs ULP binutils with this change:
https://github.com/espressif/binutils-esp32ulp/commit/af79434
2017-05-31 18:22:48 +08:00
Ivan Grokhotkov
3c583a7655 sdkconfig: set CONFIG_ESP32_DEEP_SLEEP_WAKEUP_DELAY=2000 by default
To increase the chances that the examples work out of the box, this
change is raising the default deep sleep wakeup delay to 1ms.
If GPIO15 is low at startup, ROM code takes less time to execute
(because no logging is performed), so more time may be needed to allow
flash chip to become ready.
2017-05-25 10:51:39 +08:00
Ivan Grokhotkov
98e15df7f6 examples: add ULP ADC example 2017-05-16 13:15:02 +08:00
XiaXiaotian
b22067a8f0 Optimize configuration of base MAC address
Application developer can call APIs to configure base MAC address
    instead of using menuconfig.
2017-05-10 10:15:07 +08:00
Ivan Grokhotkov
6353bc40d7 Add support for 32k XTAL as RTC_SLOW_CLK source
- RTC_CNTL_SLOWCLK_FREQ define is removed; rtc_clk_slow_freq_get_hz
  function can be used instead to get an approximate RTC_SLOW_CLK
  frequency

- Clock calibration is performed at startup. The value is saved and used
  for timekeeping and when entering deep sleep.

- When using the 32k XTAL, startup code will wait for the oscillator to
  start up. This can be possibly optimized by starting a separate task
  to wait for oscillator startup, and performing clock switch in that
  task.

- Fix a bug that 32k XTAL would be disabled in rtc_clk_init.

- Fix a rounding error in rtc_clk_cal, which caused systematic frequency
  error.

- Fix an overflow bug which caused rtc_clk_cal to timeout early if the
  slow_clk_cycles argument would exceed certain value

- Improve 32k XTAL oscillator startup time by introducing bootstrapping
  code, which uses internal pullup/pulldown resistors on 32K_N/32K_P
  pins to set better initial conditions for the oscillator.
2017-04-26 12:43:22 +08:00
rudi ;-)
e5012bd07e OTA example readme: [typo]: Worflow to Workflow
Merges PR #507 https://github.com/espressif/esp-idf/pull/507
2017-04-21 11:03:07 +10:00
Angus Gratton
40a35db784 Merge branch 'bugfix/example_naming' into 'master'
examples: Standardise naming of files, symbols, etc. in examples

* Use "example" in all example function & variable names,
  ie use i2c_example_xxx instead of i2c_xxx for example functions.
  Closes #198 https://github.com/espressif/esp-idf/issues/198
* Mark example functions, etc. static
* Replace uses of "test" & "demo" with "example"
* Split the UART example into two
* Rename "main" example files to end with "_main.c" for disambiguation

See merge request !601
2017-03-29 08:50:49 +08:00
Angus Gratton
821c70f5d7 examples: Standardise naming of files, symbols, etc. in examples
* Use "example" in all example function & variable names,
  ie use i2c_example_xxx instead of i2c_xxx for example functions.
  Closes #198 https://github.com/espressif/esp-idf/issues/198
* Mark example functions, etc. static
* Replace uses of "test" & "demo" with "example"
* Split the UART example into two
* Rename "main" example files to end with "_main.c" for disambiguation
2017-03-27 17:42:05 +11:00
Dmitry Yakovlev
a6e4e89592 ulp: add build system integration and example 2017-03-27 12:41:00 +08:00
Ivan Grokhotkov
4813ab2d28 examples: check return value of nvs_flash_init
nvs_flash_init may return an error code in some cases, and applications
should check this error code (or at least assert on it being ESP_OK, to
make potential issues more immediately obvious).

This change modifies all the examples which use NVS to check the error
code. Most examples get a simple ESP_ERROR_CHECK assert, while NVS
examples, OTA example, and NVS unit tests get a more verbose check which
may be used in real applications.
2017-03-15 10:44:54 +08:00
Ivan Grokhotkov
66c693eebb Merge branch 'feature/deep_sleep_wakeup_from_touch' into 'master'
add wakeup from touch sensor, and deep sleep example

- add new deep sleep wakeup mode
- change documentation to explain incompatibilities between different wakeup mode, add error checks
- add new ULP instructions necessary for ULP wakeup scenario
- fix issues with I_WR_REG, I_SLEEP, I_END instructions
- add deep sleep example, illustrating the use of timer, gpio, touch, and ULP wakeup triggers

See merge request !461
2017-03-08 14:27:58 +08:00
Ivan Grokhotkov
4af5f572f4 add deep sleep wake up example 2017-02-22 18:40:31 +08:00
Angus Gratton
25f739c183 ota ops: Add new functions esp_ota_get_next_update_partition / esp_ota_get_running_partition
* Update OTA example to use these.
* Refactor esp_ota_begin() to return ESP_ERR_OTA_PARTITION_CONFLICT as documented
2017-02-22 10:24:42 +11:00
Angus Gratton
eea2788f5a OTA: Fix issues with encrypted OTA
- OTA source can write non-16-byte multiples of data
- Assumption that empty ota_data is 0xFFFFFFFF untrue when encrypted
2017-01-26 18:52:35 +11:00
Angus Gratton
67336672bd OTA: Improve verification of OTA image before writing, incl. secure boot
Verify 0xE9 magic byte on first write, verify entire image before
switching.

Enable verification for secure boot signature (was using invalid ifdef
guard)
2017-01-26 16:20:06 +11:00
krzychb
0b6598c492 Added README.md to example category folders 2017-01-18 21:03:15 +01:00
Krzysztof Budzynski
ad25997349 Updated links to examples in new folders / categories in api documentation 2017-01-16 23:08:36 +01:00
Krzysztof Budzynski
382999b378 Moved examples to new folders / categories. Removed example numbers from example names 2017-01-16 23:08:35 +01:00